• Magazine of the Korea Concrete Institute
• /
• v.8 no.5
• /
• pp.123-133
• /
• 1996

Recently, the construction of infrastructures has been booming and accelerating to keep up with rapid economic growth. Construction activities and operation of transportation facilities cause unfavorable effects such as civil petitions associated with vibration-induced damages or nuisances. Accordingly, the objective of this study is to develop vibration-controlled concrete using various vibration-controlled mixtures, and also to recycle obsolete materials in part. As the first step to achieve this research, preliminary mix designs have been carried out to obtain an appropriate mix proportion above 200kg/$\textrm{cm}^2$ in uniaxial compressive strength. Test specimen based on the mix proportion selected have been actuated by the impact hammer to investigate their dynamic characteristics. Vibration-controlled mixtures are foam, latex, rubber powder and plastic resin, which have been determined to reduce a vibration by and large. KS F2437 and travel time method have been used to figure out 1st natural frequency and dynamic elastic moduli. Damping ratios have been computed by adopting the polynomial curvefitting method and the geometric analysis method on the frequency response spectrum curve. of which results have been compared and analyzed hereon.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.4
• /
• pp.351-359
• /
• 2013

Blast furnace slag (BFS) have many advantages that are related to effective value improvement on applying to concrete while side effects of blast furnace slag also appear. Thus, research team conducted an experiment with high volume slag to see if the attribute of waste alkali accelerator for mixing rate, mixed use of NaOH and $Na_2SiO_3$, and early strength agent for mixing rate for replacement ratio and for the types of the stimulants in order to increase the use of blast furnace slag1s powder. As the result of the experiment, when it comes to compression strength, all of the alkali stimulants have been improved as the replacement rate increases except for sodium hydroxide. Among the alkali stimulants, sodium silicate was high on dynamic elastic modulus and absorption factor. In case of early strength agent, the mix of mixing 1.5% and blast furnace slag 75% have showed high strength enhancement. In event of Waste Alkali accelerator, it has showed different consequences for each experiment.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.3
• /
• pp.219-225
• /
• 2017

The durability factors of concrete has been researched by many researchers. Among the chemical ingression by acid, alkali, or salt, specially the ingression by sulfate has been actively studied and reported. Generally, for the oil type chemical, it is reported to cause the excessive expansion of cement mortar and further to cause the collapse, while there was no enough research on influence of oil type, relationship with microstructure of mortar, and collapse pattern. Therefore, in this research, using the various oils from general market, the degradation properties of the mortar mixtures with various mix designs were evaluated. according to the experiment, Bio diesel damaged worst and the mix design with less cement content showed the worst damage against oils.

• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.184-193
• /
• 2009

In recent years, the architectural interest in the apartment design has been getting focused on qualitative improvement and design differentiation. Especially the facade design differentiation is one of the most important elements in this matter. The purpose of this study is to provide the basic informations that can be referenced when architects are dealing with exterior design by analyzed design types and characteristics of apartment entrances. Target apartment of this study was whasung dongtan the 2nd phase new city districts which was planned to solve a housing shortage in the capital region. Having examined eleven pilot districts, four 1st construction areas, and eight 2nd construction areas, - total 23 complexes - 282 apartment entrances in 212 apartment buildings were carefully researched. Apartment entrance design can be divided into 15 different design elements: design types and combination types, direction, shape, height, approach types, exterior wall finishes of entrance, exterior wall finishes of lower parts of apartment, handrail types of slope, floor finishes of slope, distribution ratio of piloti, ceiling height of piloti, floor finishes of piloti, space use of piloti, window establishment between piloti and elevator hall, landscape elements of piloti. Design characteristics of building entrances were also analyzed in 4 groups (I, II, III, IV) divided by construction contractors ranking. In conclusion, first, design types and combination types can be classified into 15 different kinds, and the group I and II tend to show wider variety of entrance combinations. Secondly, the height and volume of extrude entrance type tend to increase in the group I and II. Third, the spatial configuration of pilotis appears to show more of 'pass + store + break' rather than 'access', as we get closer to the group I.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.70-79
• /
• 2020

The main objective of this research to develop an IoT based wireless contactless ultrasonic system (ICUS) and its application to concrete structure. The developed system consists of 16 mems, 2Mhz digitizer, amplifying circuit, FPGA, and wifi module, enabling to measure leaky surface waves from concrete specimens without physical coupling process and wires. Multi-channel analysis is performed to improve the accuracy of data analysis, and the velocity of leaky surface waves and acoustics are derived. Field inspection of railroad concrete sleepers is conducted to evaluate the performance of the system and to compare the results with conventional ultrasonic pulse velocity (UPV). As a result of the field inspection, UPV was limited to evaluate damages. This is because crack pattern of railroad sleepers is parallel to ultrasonic ray path and accessibility of the railroad at the field is disadvantageous to contact-based UPV. On the other hand, ICUS possibly detect the damages as reduction of dynamic modulus by up to 59% compared to non-damaged specimen.

• Tunnel and Underground Space
• /
• v.17 no.2 s.67
• /
• pp.83-89
• /
• 2007

Impact-echo test is a non-destructive testing method to determine dynamic properties of a material. This presentation introduces the experimental set-up and procedure of the test for rock specimens. In addition, the test results of domestic rocks collected in 5 different areas, a cement mortar and aluminium alloy are presented. The test results include resonance frequencies of P- and S-wave as well as damping ratios of the described 7 different materials. The differences between dynamic and static values of elastic moduli are about 10%, while the dynamic Poisson's ratios are greater than the static Poisson's ratios by at least 0.07. The damping ratio is dependent on the joint density and degree of weathering of a rock specimen.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.52-59
• /
• 2006

The purpose of this study was to evaluate the effects of ground granulated blast-furnace slag on strength development and durability of ordinary portland cement concrete (OPC) with steam curing types. Main experimental variables were slag contents(0%, 10%, 30%, 50%, 70%) and curing types (standard, accelerated curing). It were performed to check the basic properties of concretes that compressive strength, rapid chloride ion permeability and chemical resistance. From the result, we have found that increasing the amount of blast-furnace slag produced concrete with increased compressive strength and permeability resistance. Rapid freezing-thawing test showed that they were good enough to protect the concrete structures and to carry out cyclic freezing and thawing. The freeze-thaw resistance of blast-furnace slag produced concretes maintained above 90% of relative dynamic modulus after 300 freezing-thawing cycles. Increasing the amount of blast-furnace slag produced concretes with increased chemical resistance.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.684-695
• /
• 2021

The purpose of this study was to identify the influence of compassion fatigue, compassion satisfaction and nursing organizational culture on burnout in integrated nursing care units nurses. The participants were 170 nurses working in integrated nursing care units of three general hospitals located in Seoul and Gyeonggi-do. Data were analyzed using independent t-test, ANOVA, Scheffé, Pearson's correlation and stepwise multiple regression analysis. Burnout was significantly different according to turnover intention, job satisfaction, health status. Burnout showed a positive correlation with compassion fatigue and a negative correlation with compassion satisfaction and relation oriented culture. Regression analysis revealed that compassion fatigue, compassion satisfaction, relation oriented culture and age were significant variables affecting the burnout, and the lower the age, the higher the burnout. Therefore, strategies to decrease compassion fatigue and to enhance compassion satisfaction and positive aspects of relation oriented culture for lower age nurses group are needed.

• Korean Journal of Head & Neck Oncology
• /
• v.34 no.2
• /
• pp.29-34
• /
• 2018

Background/Objectives: The aim of this study was to investigate the diagnostic value of i-scan in the differential diagnosis of oral cavity leukoplakia based on visualization of abnormal vascular features. Materials & Methods: Thirty- one patients with oral cavity leukoplakia were enrolled in the study. Images of their oral cavity obtained using conventional white light endoscopy and an i-scan-enhanced endoscopy (Pentax DEFINA EPK-3000 Video Processors, with Pentax VNLJ10) were reviewed. The microvascular features of the lesions and vascular changes were analyzed and the results were compared with the histopathologic diagnosis. Results: Among the 31 oral cavity leukoplakia patients, 8 (25.8%) patients revealed hyperkeratosis, 10 (31.2%) low-grade dysplasia, 5 (16.2%) high-grade dysplasia and 8 (25.8%) invasive squamous cell carcinoma on histopathologic examination. Using i-scan-enhanced endoscopy, we could found abnormal vascular change with neoplastic neoangiogenesis in most high-grade dysplasia or invasive cancer in oral cavity. (high-grade dysplasia: 4/5 [80.0%], and invasive squamous cell carcinoma: 7/8 [87.5%]). Conclusion: i-scan-enhanced endoscopy could be a useful optical technique for the diagnosis of oral cavity leukoplakia. Our results suggest that i-scan may be a promising diagnostic tool in the early detection of suspected oral mucosal lesion.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.319-323
• /
• 2018

Ferronickel slag is a by-product from the ferronickel smelting process and it is divided into air-cooled ferronickel slag and water granulated ferronickel slag according to cooling system. The purpose of this experimental resesrch is to investigate the mechanical properties and resistance to freezing and thawing of concrete using air-cooled ferronickel slag(ACFNS) fine aggregate. For this purpose, the concrete specimens with water-cement ratio of 50% were made with ACFNS's replacement ratios of 0%, 20%, 30%, 40%, 50%, 70%, and 100% by volume of fine aggregate. It was observed from the test results that the compressive strength and static modulus of elasticity of ACFNS fine aggregate concrete were increased with increasing replacement ratio of ACFNS and the resistance to freezing and thawing of this was similar to reference concrete which had the relative dynamic modulus of elasticity of more than 90% during the freezing and thawing of 300 cycles.