• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.576-584
• /
• 2020

The extruder screw material is mainly SKD11, but the recent development of synthetic resins have increased the occurrence of chemical corrosion and wear. To solve this issue, high chromium cast iron is needed because of its good abrasion resistance and corrosion resistance, but its use is avoided because of its poor machinability. In this study, to improve the machinability of high chrome cast iron, 0, 0.5, 1.0, 1.5% of nickel, which has excellent workability, was added to high chromium cast iron with a composition of Fe-23Cr-2.5C-1.2Si-1.08Mn-0.48Mo-0.3V, and annealed after casting. Subsequently, the effect of nickel on the machinability and corrosion resistance was analyzed using a turning test and coin polarization test, and compared with SKD11. After casting using a high-frequency vacuum induction furnace, the annealing treatment was performed at 750 ℃ for five hours and then reheated at 1100 ℃ for five hours. A turning test after annealing at 750 ℃ showed that the machinability was improved remarkably when the nickel content was over 1.0%. In the potentiodynamic polarization test in a 5% NaCl solution, the corrosion resistance decreased with increasing nickel content in the as-cast and annealing treatment. On the other hand, after reheating, the corrosion resistance was best with a 1.5% nickel content.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.177-177
• /
• 2016

우수한 내식성을 가지는 Zn 박막은 자동차, 가전제품, 전자제품 등에 사용되는 철 생산품의 수명 연장을 위하여 널리 사용되어 왔다. 최근 개발된 Zn-Mg 합금 박막은 Zn나 Mg에 비해 우수한 내식성을 나타내는 Zn-Mg 합금상을 형성하기 때문에 순수한 Zn 박막이나 다른 Zn 계 합금 박막에 비해 우수한 내식성을 가진다고 보고된 바 있다. 본 연구에서는 다양한 합금상의 형성을 위해 Mg 중간층 두께를 제어하며 Zn/Mg/Zn 다층 박막들을 합성하였으며 열처리를 통한 합금상의 변화, 그에 따른 박막의 내식성에 관해 연구하였다. Zn/Mg/Zn 다층 박막은 총 $4{\mu}m$의 두께로 Mg 중간층의 두께를 변화하였으며 비대칭 마그네트론 스퍼터링 공정을 이용하여 냉연강판 위에 합성하였다. 합성된 다층 박막은 다양한 Zn-Mg 합금상을 형성하기 위하여 진공로를 이용하여 $200^{\circ}C$에서 1시간 동안 어닐링 열처리를 실시하였다. 열처리 전, 후 Zn/Mg/Zn 다층 박막의 미세조직과 조성은 X선 회절 분석기 (XRD)와 전계방출형 주사전자현미경 (FE-SEM)과 글로우 방전 분광분석기 (GDEOES)를 사용하여 분석하였다. 어닐링 열처리를 통한 Zn-Mg 합금상 형성이 Zn/Mg/Zn 다층 박막의 내식성에 미치는 영향을 평가하기 위하여 동전위 분극시험과 EIS(Electrochemical impedance spectroscopy) 분석 실시하였다. FE-SEM과 GDOES 분석 결과, Zn/Mg/Zn 다층 박막들 각각의 중간층 Mg 두께는 1.5, 2.0, $2.5{\mu}m$ 였으며, 어닐링 열처리 후 중간층의 Mg이 상, 하부의 Zn 층으로 확산되면서 박막을 치밀한 구조로 변화시키는 것으로 확인되었다. XRD 분석 결과, 열처리를 하지 않은 Zn/Mg/Zn 다층 박막들에서는 Mg 상의 피크의 강도 차이만 존재할 뿐 Zn-Mg 합금상은 형성되지 않았다. 그러나 열처리를 후 Zn/Mg/Zn 다층 박막들에서 $MgZn_2$ 합금상이 형성되었으며, 중간층 Mg 두께가 $1.5{\mu}m$ 이하인 박막에서는 Zn 상이, 초과하는 박막에서는 Mg 상이 잔존하는 것을 확인하였다. EIS 분석 결과, 열처리 후 박막의 전하이동저항 값은 증가하며 박막의 어드미턴스 값이 감소하였으며 Bode phase plot을 통해 열처리 후 시정수(time constant)가 높은 주파수 영역에서 형성 되는 것을 확인하였다. 이는 열처리 후 Zn/Mg/Zn 다층 박막이 치밀해지고 내식성이 향상되었음을 나타낸다. 동전위 분극시험 결과에서도 마찬가지로 열처리 한 Zn/Mg/Zn 다층 박막들은 열처리 전 대비 내식성이 향상되는 것을 확인하였다. 열처리를 통한 Zn/Mg/Zn 다층 박막의 내식성의 향상은 우수한 내식성의 합금상의 형성과 박막 미세구조의 치밀화에 기인한다고 판단하였다. 또한 열처리 한 Zn/Mg/Zn 다층 박막들에서는 Zn와 $MgZn_2$ 상들이 공존 할 경우 가장 우수한 내식성을 나타내었으며, 이는 $MgZn_2$와 Zn 사이의 적은 전위 차이로 인해 갈바닉 부식 효과가 감소되었기 때문으로 판단된다.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.41-50
• /
• 2002

The streaming potential generated by the electrokinetic flow within electric double layer of charged microchannel is applied to determine the zeta potential of hollow-fiber membrane pore by using the general Helmholtz-Smoluchowski equation. The streaming potential is know to provide a useful real-time information on the surface property and the interaction between pore and particles in actual situations and physicochemical conditions. The influence of physicochemical parameters upon the filtration with hollow-fibers has been examined with an in-situ and simultaneously monitoring the streaming potential as well as permeate flux. In particular, the present study examined an experimental method to identify the effect of cake layer which can vary according to the axial position of a hollow-fiber and the progress of membrane fouling by measuring the position-dependent streaming potential. As the latex concentration increases, the permeate flux decreased but the streaming potential increased. The growth of cake layer has been mire developed with increasing latex concentration, however, the effect of surface charges of latexes deposited on the membrane surface leads to increase the streaming potential. With increasing ionic concentration of KCI, both the permeate flux and the streaming potential decrease. The increase of ionic concentration provides a compact cake layer due to the shrinkage of Debye length and the decreased streaming potential results from the weakened ionic flows owing to a thin diffusive double layer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.38.1-38.1
• /
• 2009

산업이 발전함에 따라서 특수한 물성을 갖는 재료의 수요가 점점 증가하고 있는데최근 재료의 경량화, 화학적 안정화 등을 이용한 시스템의 효율성 향상, 환경오염방지 등과 같은 목적으로 사용재료의 고급화 추세가 현저해짐에 따라 티타늄 소재에 대한 관심과 수요가 증가하고 있다. 하지만, 국내에서는 티타늄 및 티타늄 합금의 원재료 및 가공제품을 대부분 수입에 의존하는 실정이다. 또한 티타늄 및 티타늄 합금의 스크랩의 경우 재활용률은 50~80%에 달하고 알려져 있으나 국내에는 이들의 재활용처리를 위한 시설이 없으며 폐기 또는 외국으로 저가로방출하고 있는 실정이다. 이에 따라 본 연구에서는 판재, 선재 및 관등의 기계 가공 시 주로 발생하는 티타늄 스크랩을 이용하여 HDH법을 이용하여 티타늄 분말을 제조하였다. 제조된 분말은 $900{\sim}1200^{\circ}C$의 온도범위에서 방전플라즈마소결공법을이용하여 소결체를 제작하였으며, 소결체의 강도, 경도 및미세조직 등을 평가하였다. 내식성향상을 위해 염화팔라듐을 이용하여 티타늄-팔라듐 분말 합금을 제조하여 티타늄 합금 분말의 소결체와 순수티타늄의 소결체와 내식성 비교를 위해 동전위분극시험을 통해 평가하였다.

• Asian Journal of Turfgrass Science
• /
• v.14 no.1
• /
• pp.241-250
• /
• 2000

In 1997, a new disease on creeping bentgrass and Kentucky bluegrass occurred in the green and fairway of a few golf courses in Korea. The disease spread gradually throughout the country and became a threat to turfgrass management. Symptoms of the disease consisted of small, circular, and sunken patches sized 3~5cm in diameter. The disease named as a dollar spot following its characteristic symptoms of circular blight and bleach on the green. The disease peaked two times in a year from April to June and from late August to October and white cottony mycelia of the causal fungus developed on diseased turfs in the early morning when the conditions were favored. A causal fungus was consistently isolated from the infected tufgrass and seven isolates originated from seven golf courses located in six provinces were selected for further study. The fungus produced abundant white aerial mycelia on PDA and turned to dark gray or light brown as it aged. Width of the mycelium was ca. $5~8\mu\textrm{m}$. While sclerotia were not readily formed on the medium, scattered small and dark colored stromata were developed on the surface. The fungus grew well on PDA between 5 to $30^{\circ}C$ and maximally around $25^{\circ}C$. Based on investigated mycological and cultural characteristics, the causal agent of dollar spot was identified as Sclerotinia homoeocarpa. The fungus showed strong pathogenicity to several turfs as creeping bentgrass, Kentucky bluegrass, perennial ryegrass, tall fescues, and zoysiagrass.

• Asian Journal of Turfgrass Science
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2001

Antifungal activity of 20 chemicals registered to turfgrass diseases was evaluated. Among the chemicals, iprodione, benomyl, iprodione+thiram, pencycuron+tebuconazole, hexaconazole, and iprodione+thiophanate-methyl exhibited high antifungal activity to the dollar spot fungus. All isolates were greatly inhibited by the chemicals at the concentration over 32ppm($\mu\textrm{g}$/ml). However, sensitivity of the isolates to chemicals was varied at the lower concentration as 8 and 16 ppm as follows. The isolate originated from Ora golf course was resistant to iprodione and iprodione+thiophanate methyl, Gonjiam isolate to iprodion, Youngpyung isolate to iprodione+thiram, and Dogo isolate to iprodione+thiram, pencycuron+tebuconazole, and tebuconazole. It was found from this study that the varied chemical resistance among the isolates was positively related to the application time of the chemical in the golf course. Consequently, when a chemical was applied more often times than the others to the golf course, the fungal isolates originate from the field showed higher resistance to the former chemical. Effects of the chemicals on control of the dollar spot was evaluated in the field. All tested chemicals revealed over 70% disease control efficacy, however, mepronil+propiconazole was the best showing 83% control efficacy and followed by fenarimo, iprodione, terbuconazole, thiram, and thiophanate-methyl.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.279-286
• /
• 2006

Electrokinetic technique was considered in removing arsenic from the abandoned mining tails. In order to estimate the removal characteristics of arsenic, the sequential extraction analysis and desorption experiment were carried out prior to the application of electrokientic process. The result of sequential extraction analysis indicated that the water soluble and exchangeable fraction, easily leachable to ground water, were very low as much as about 2.5% and the fraction except residual (38.3%), possibly extractable under very acidic or alkalic environment, was about 59%. In the result of desorption test using four different kinds of electrolytes, the mixture of citric acid and sodium dodecyl sulfate (SDS) showed the highest desorption efficiency as much as 77.3%. The removal efficiencies of arsenic from mining tailings by electrokinetic process under the different electrolyte environments were slightly low and resulted in the following order: citric acid + SDS (18.6%) > 0.1 $NHNO_3$ (8.1%) > HAc (7.4%) > Distilled water(6.6%). Also, arsenic in soil matrix was moved favorably in the direction of anodic rather than cathodic region, which is opposite trend with cationic metal ions generally existing in soil, because anionic form of arsenic is dominated in acidic soil caused by the movement of acid front form anode.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.13-23
• /
• 2001

In this study, the characteristics of pH variations and contaminant distribution in soil are investigated during electrokinetic treatment for the purpose of restoring contaminated soil with heavy metal. For these objects, laboratory test for the kaolin contaminated by lead was performed. During electrokinetic treatment, lead was transported from anode to cathode. And 75% of lead removed within 80% region of the specimen. Most lead, however, that transported from anode to cathode precipitated in the vicinity of cathode compartment, thus the amount of lead removed by electroosmosis was little. Electrokinetic treatment satisfied regulation criteria of Korean Soil Environment Conservation Law within almost region of the specimen. But enhancement methods can be regarded as inevitable requisite for the cathode region.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.174-174
• /
• 1994

항종양 물질의 탐색 및 연구 작업이 미생물을 대상으로 행해져 온것은 이미 오래전부터 이며, 기존의 연구 발표된 것들을 볼때 미생물 스크리닝의 증요성은 점차 증대되어가고 있다. 이에 본 연구에서는 국내 토양에서 방선균 약 1000여주를 분리하여 항종양 물질을 생산하는 방선군의 분리, 동전하고, 그 생산물질의 특성을 밝히고자 하였다. 방선균의 분리는 전국 각지에선 채집한 토양시료 각 1 g 씩을 80 $^{\circ}C$에서 90분간 건조처리한후 멸균된 증류수를 이용하여 각 단계별로 희석하여 Starch nitrate casein agar와 Glycerol asparagine agar를 사용하여 방선균을 분리하였다. 분리된 방선균을 Yeast extract-malt extract 액체 배지에서 7일간(160 rpm/28 $^{\circ}C$) 배양하였다. 여기에서 얻어진 배양액을 이용하여 항종양능을 확인한기 위해서 암세포주인 L1210주와 P388 D$_1$주, 정상 세포주로는 Vero 세포주를 이용한 MTT colorimetric assay를 이용하였다. 이들 실현에 대한 결과로써 S-104, 117, 409의 세 균주의 항종양물질 생산 균주를 분리하였다. 이들 균주가 생산하는 물질들은 기존의 시판 항암제인 Adriamycin에 비해 높게 나타났으며, 이들 균주의 동정은 ISP의 기준에 의하여 행하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.77-84
• /
• 2006

For a fire cause judgement this paper describes the heating characteristics of electric bare wire melted by AC current. The cower wires prepared for the experiment were 1.2[mm], 1.6[mm], and 2.0[mm] in diameter. Through the cross section analysis(CSA), it was confirmed that the dendrite structure grew at the angle of about 40[$^{\circ}$] or 60[$^{\circ}$] when the fusing current was applied to the wires. The larger the fusing current is, the more decreased the growth angle of the dendrite structure is. It was confirmed that the dendrite structure was arranged like the columnar structure.