• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.46-54
• /
• 1998

In this paper, the erect of notch geometries on dynamic stress concentration was investigated by using the dynamic photoelasticity and the drop weight loading system Dynamic stress fields arisen by elastic wave through the loading system around various types of notch geometries were captured by using $10^6/sec$ frame rate Cranz-Shardin camera system with 12 photographic frames. We found that dynamic stress concentrations around the notch tip and comer were highly dependent on the change in notch geometries. The elders of dynamic stress singularity ware determined with respect to varying geometries of notches and we explained dynamic stress concentration in terms of the orders of dynamic stress singularity.

• The Korean Journal of Rheology
• /
• v.6 no.1
• /
• pp.49-59
• /
• 1994

높은 전기장 하에서 다분산, 비구형 실리카/실리콘 오일 현탁액의 전기유변 (electrorheological, ER)현상을 살펴 보았다. 전기유변유체는 전기장 방향으로 사슬구조를 형 성하는 특성을 보이며 이것이 유변물성의 향상에 기여하는 것으로 알려졌다. 동적(dynamic) 상태 실험에서 전기장 하의 실리카 현탁액은 매우낮은 임계변형율(${\gamma}$c =0.1%)이상에서 비선 형 점탄성을 보였다. 저장탄성계수(G＇)는 변형율 변화에 손실탄성계수(G＂)는 매질의 점도 에 더 민감한 의존성을 보였다. 또한 겉보기 항복응력은 입자의 부피분율과 전기장에$\Phi$1.9E1.4 의 의존성을 보였는데 부피분율에 대한 의존성이 큰 이유는 0.1 이상의 부피분율에서 복합 사슬 구조 내의 입자들 간의 상호 정전효과가 지배적으로 나타나기 때문이라고 생각된다. 정상상태 실험에서는 부피분율이 크거나 높은 전기장 하에서 전단속도가 0.1sec-1 정도 이하 로 감소함에 따라 전단응력이 급겨히 증가하는 현상을 보였다. 그러므로 본질적인 동적 항 복응력을 얻기 위해서는 매우 낮은 전단속도 영역의 특이한 응력거동을 고려해야한다. 큰 전단속도 하에서는 hydrodynamic interaction의 영향으로 전단속도의 증가에 따라 전단응력 이 증가하였다. 이같은 전단응력의 거동을 계단전단실험으로 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.331-341
• /
• 1993

The propagating crack problems under dynamic antiplane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems by theoretical method or experimental method in orthotropic material, it is important to know the dynamic stress intensity factor in the vicinity of crack tip. Therefore the dynamic stress field and dynamic displacement field with dynamic stress intensity factor of orthotropic material in mode III were derived. When the crack propagation speed approachs to zero, the dynamic stress components and dynamic displacement components derived in this paper are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determined by using the concept of crack closure energy with the dynamic stresses and dynamic displacements derived in this paper. Finally, the characteristics of crack propagation are studied with the properties of orthotropic material and crack speed. The variation of angle .alpha. between fiber direction and crack propagating direction and crack propagation speed fairly effect on stress component and displacement component in crack tip. The influence of crack propagation speed on the speed on the stress and displacement is greater in the case of .alpha.=90.deg. than in the case of .alpha.=0.deg. and the faster the crack propagation speed, the greater the stress value and displacement value.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.203-210
• /
• 1995

전기장 하에서 폴리아닐린/미네랄 오일 현탁액의 유변학적 특성에 관한 실험적인 연 구를 큐엣 셀 형태의 레오미터를 사용하여수행하였다. 폴리아닐린 현탁액은 전기장을 가해 줄 때 점도가 크게 상승하는 현상을 보였고 부피분율과 전기장의 3/2승에 비례하는 동적 항 복응력을 나타내었다. 작은 변형 진폭의 동적 상태 실험을 통하여 저장계수와 손실계수를 변형진폭, 변형의 구동 주파수 및 전기장의 함수로 나타내었다. 저장계수는 전기장을 증가시 킬 때 증가하나 손실계수(5wt%)는 약한 전기장 의존성을 보였다. 낮은 응력을 가해줄때의 크립과 회복곡선은 초기의 순간적인 변형 증가와 지연되는 변형 그리고 회복 불가능한 영구 적 변형으로 구성되어진다. 탄성 한계 항복응력은 전기장의 세기가 증가함에 따라 증가하였 다. 매우 작은 변형에서는 응력과 변형사이의 선형적 관계를 보여 고체와 유사한 거동을 나 타내었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1051-1061
• /
• 2011

The influences of density variation on stress and displacement fields at a propagating Mode-III crack tip in orthotropic functionally graded materials (OFGMs) are studied. The crack propagates dynamically at a right angle to the gradient of physical properties. Three kinds of elasticity and density gradients are analyzed in this study. They are as follows: (1) the density varies without elasticity variation, (2) the directions of the density and elasticity gradients are opposite to each other, and (3) same. For these cases, the stress and displacement fields at the crack tip are developed and the dynamic stress intensity factors for propagating cracks are also studied. When the crack speed is low, the influence of density variation on the stresses and displacement is low. However, when the crack speed is high, this influence is very high.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.2
• /
• pp.313-330
• /
• 1993

The propagating crack problems under dynamic plane mode in orthotropic material is studied in this paper. To analyze the dynamic fracture problems in orthortropic material, it is important to know the dynamic stress components and dynamic displacement components around the crack tip. Therefore the dynamic stress components of dynamic stress field and dynamic displacement components of dynamic displacement field in the crack tip of orthotropic material under the dynamic load and the steady state in crack propagation were derived. When the crack propagation speed approachs to zero, the dynamic stress component and dynamic displacement components derived in this study are identical to the those of static state. In addition, the relationships between dynamic stress intensity factor and dynamic energy release rate are determinded by using the concept of crack closure closure energy with the dynamic stresses and represented according to physical properties of the orthotrophic material and crack speeds. The faster the crack velocity, the greater the stress value of stress components in crack tip. The stress value of the stress component of crack tip is greater when fiber direction coincides with the crack propagation than when fider direction is normal to the crack propagation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.143-156
• /
• 2015

The stress and displacement fields at the crack tip were studied during the unsteady propagation of a mode III crack in a direction that was different from the property graduation direction in functionally graded materials (FGMs). The property graduation in FGMs was assumed based on the linearly varying shear modulus under a constant density and the exponentially varying shear modulus and density. To obtain the solution of the harmonic function, the general partial differential equation of the dynamic equilibrium equation was transformed into a Laplace equation. Based on the Laplace equation, the stress and displacement fields, which depended on the time rates of change in the crack tip speed and stress intensity factor, were obtained through an asymptotic analysis. Using the stress and displacement fields, the effects of the angled property variation on the stresses, displacements, and stress intensity factors are discussed.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1313-1318
• /
• 2000

총고형분 함량$(TS:\;50{\sim}57%)$을 달리하여 숙성시킨 고추장의 유동특성, 정적 및 동적점탄특성을 관찰하였다. 고추장의 TS가 증가함에 따라서 점조도 지수(K)와 겉보기 점도$({\eta}_{a.5})$는 증가하였으며 유동성 지수(n)는 1보다 훨씬 낮은 0.24-0.31의 범위를 나타내어 고추장은 shear-thinning 성질을 보여주었다. 고추장의 항복응력 측정에서는 고추장의 TS가 증가함에 따라 Casson 항복응력$({\sigma}_{oc})$은 증가하는 경향을 나타내었으며, 또한 고추장의 액상 매개체인 serum 점도$({\eta}_{se})$는 고추장의 TS와 매우 좋은 상관관계$(R^2=0.97)$를 나타내었다. 고추장의 동적점탄성 실험에서는 주파수$({\omega})$가 증가함에 따라 저장탄성률(G#)와 손실탄성률(G@)은 증가하였으며 양(+) 기울기로 G#수치가 G@수치보다 높게 나타났다. 이는 고추장이 약한 겔과 같은 구조적 특성을 갖고 있으며 또한 shear-thinning 거동을 가지고 있음을 나타낸다. 정적점탄성 실험에서 고추장의 총고형분 함량에 따라서 순간탄성 변형$(J_0)$과 지연탄성변형$(J_1)$은 총고형분 함량이 증가함에 따라서 감소하였으며 점도$({\eta}_N)$와 지연시간 $({\tau}_1)$은 증가하였다. 따라서 고추장은 농도가 증가함에 따라 보다 탄력적이며 안정된 구조를 형성하고 있음을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.311-318
• /
• 2015

A nonlinear dynamic response structural optimization process is proposed for the television (TV) packing system that protects the damage from a drop situation using the equivalent static loads (ESLs). Topology optimization using ESLs is carried out for conceptual design, and shape optimization using stress ESLs for a virtual model is performed for detailed design. Stress ESLs are static loads that generate the same displacement as well as the stress fields of linear static analysis as those of nonlinear dynamic analysis. Thus, the response of nonlinear dynamic analysis can be utilized as a constraint in the linear static structural optimization. An actual example is solved to validate the process. The drop test of a television packaging system is analyzed by LS-DYNA, and NASTRAN is used for optimization.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1217-1222
• /
• 2002

The dynamic photoelasticity with the aid of Cranz-Shardin type high speed camera system is utilized to record the dynamically propagating behavior of the interface crack. This paper investigates the effects of the hole (existed along the path of the crack propagation) shape on the dynamic interface crack propagation behavior by comparing the experimental isochromatic fringes to the theoretical stress fields.