• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.157-163
• /
• 2013

In this paper, we propose a vision and depth information based real-time hand gesture interface method using finger joint estimation. For this, the areas of left and right hands are segmented after mapping of the visual image and depth information image, and labeling and boundary noise removal is performed. Then, the centroid point and rotation angle of each hand area are calculated. Afterwards, a circle is expanded at following pattern from a centroid point of the hand to detect joint points and end points of the finger by obtaining the midway points of the hand boundary crossing and the hand model is recognized. Experimental results that our method enabled fingertip distinction and recognized various hand gestures fast and accurately. As a result of the experiment on various hand poses with the hidden fingers using both hands, the accuracy showed over 90% and the performance indicated over 25 fps. The proposed method can be used as a without contacts input interface in HCI control, education, and game applications.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.419-429
• /
• 2013

The Wireless sensor network(WSN) consisting of a large number of sensors aims to gather data in a variety of environments. The sensor nodes operate on battery of limited power. so, To extend network life time is major goals of research in the WSN. In this paper, we state the key point of a energy consumption with minimum&load balancing. The proposed protocol guarantee balance of number of cluster member nodes using the node memory threshold and optimization of distribution of cluster head using the optimized clustering method. The results show that the proposed protocol could support the load balancing and high energy efficiency by distributing the clusters with a reasonable number of member nodes. The simulation results show that our schme ensure longer life time in WSN as compare with existing schemes such as LEACH and CBLM.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.1-8
• /
• 2009

Detecting entry and exit zones in a view covered by multiple cameras is an essential step to determine the topology of the camera setup, which is critical for achieving and sustaining the accuracy and efficiency of multi-camera surveillance system. In this paper, a graph theoretic clustering method is proposed to detect zones using data points which correspond to entry and exit events of objects in the camera view. The minimum spanning tree (MST) is constructed by associating the data points. Then a set of well-formed clusters is sought by removing inconsistent edges of the MST, based on the concepts of the cluster balance and the cluster density defined in the paper. Experimental results suggest that the proposed method is effective, even for sparsely elongated clusters which could be problematic for expectation-maximization (EM). In addition, comparing to the EM-based approaches, the number of data required to obtain stable outcome is relatively small, hence shorter learning period.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.1
• /
• pp.66-74
• /
• 2015

Conventional hydrophones can only measure acoustic pressure. To measure both acoustic pressure and incident direction, various types of vector hydrophones have been researched. In this paper, we deal with a ring-type multimode vector hydrophone divided into 4 elements and present a direction-of-arrival (DoA) estimation method based on the pressure gradient-acceleration relationship. The performance of the presented method is analyzed by the simulation based on the sensor modeling and is verified by the water tank experiment. The proposed method could work under the multi-frequency condition and may be utilized in many applications due to its low computation complexity.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.121-129
• /
• 2011

One of the major challenges of minimum energy consumption for wireless sensor networks(WSN) environment. LEACH protocol is hierarchical routing protocol that obtains energy efficiency by using clustering. However, LEACH protocol in each round, because the new cluster configuration, cluster configuration, whenever the energy consumed shorten the life of the network. Therefore in this paper, the cluster is formed in WSN environment in early stage and the problems with energy waste have been solved by selecting C-node. In the initial round of proposed model uses 26 percent more than traditional LEACH energy consumption. However, as the round is ongoing, it has been proved by the network simulation tool that the waste of energy could be diminished up to 35%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4B
• /
• pp.153-161
• /
• 2005

In a multi-channel network based of wavelength division multiplexing (WDM) technology, an efficient protocol is needed in order for the transmitter and receiver to be tuned to the same wavelength during message transmission time. This paper proposes a priority-based reservation protocol that can efficiently support variable-length messages that require different QoS requirements. In this proposed protocol, high-priority nodes can reserve the data channel before low-priority nodes. However, once a node reserves a data channel successfully, it can persistently use the reserved channel till message transmission is finished regardless of the priority of the node. Moreover, the protocol can operate independently of the number of nodes, and any new node can join the network anytime without requiring network re-initialization. The protocol is analyzed with a finite population model and the throughput-delay characteristics are investigated as performance measures.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.219-226
• /
• 2000

In this paper, we design and implement a IF(intermediate frequency) module for WLL(wireless local loop) CDMA(code division multiple access) basestation. The implemented IF transceiver is consists of transmitter, receiver and local oscillator. The considered signal bandwidth is 10 MHz and the local carrier frequency is 40 MHz. As test results, the If transmitter output power is -5dBm $\pm3dB$when the baseband input is -10dBm $\pm3dB$, and the IF receiver output power is -10dBm $\pm3dB$when the IF input is -5dBm $\pm3dB$. Also the AGC(automatic gain control) circuit has dynamic range of 9 dB from -7dBm to +2dBm with output power 2dBm. And the group delay characteristic is analyzed by comparing the phase delay from 1 MHz to 5 MHz and the phase distortion is very low. We can conclude that this IF system can be applied to high speed data rate communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.17-25
• /
• 2000

ATM PON system is regarded as a solution of the next generation access network because it can cover various types of subscribers in a single platform. In this paper, we describe the merit of the ATM PON and the key protocols for its operation. Above all, the ranging is the most important protocol providing a mean of the time-division multiple access in the system. A problem in the protocol is that the window size, the time interval that ranging cell arrives, is too long. During the interval, user traffics cannot be send to the upstream, which makes the quality of service degraded. In this paper, we suggest a method to minimize the window size when the length of the optic fiber is known with some deviation. The window size can be reduced as 7 % of the conventional method when the deviation of the length is 1 Km.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1575-1580
• /
• 2011

A key factor in the study of hybrid vehicle is to enhance the usability of energy. The paper introduces the monitor and controlling technology of hybrid vehicle that can process the relevant information considering the structure of power system and driving strategies simultaneously, and can monitor its results. This technology, so called HEV algorithm analysis, has been applied to PRIUS THS made by Toyota Co. LTD. This model is adapted to parallel hybrid type. It has a somewhat comlex structure, but has several merits. It's energy loss is lower when conversing. and also it is easily applied to the conventional vehicle having a gasoline engine without any overall changing of its structure, and so on. This monitor and controlling technology is very useful to study on the various driving strategies of hybrid vehicle for maximizing the usability between engine and electric motor.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.640-654
• /
• 1996

This paper presents a synthesis method for multi-level Reed-Muller circuits using BDDs(Binary Decision Diagrams). The existing synthesis tool for Reed circuits, FACTOR, is not appropriate to the synthesis of large circuits because it uses matrix (map-type) to represent given logic functions, resulting in the exponential time and space in number of imput to the circuits. For solving this problems, a syntheisis method based on BDD is presented. Using BDDs, logic functions are represented compactly. Therefor storage spaces and computing time for synthesizing logic functions were greatly decreased, and this technique can be easily applied to large circuits. Using BDD representations, the proposed method extract best patterns to minimize multi-level Reed Muller circuits with good performance in area optimization and testability. Experimental results using the proposed method show better performance than those using previous methods〔2〕. For large circuits of considering the best input partition, synthesis results have been improved.