• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.7
• /
• pp.29-35
• /
• 2010

The cooperative transmission between sectors in next generation communications standards, e.g., 3GPP LTE-Advanced and IEEE 802.16m, has become an important research issue. Hence methods to decide the optimal antenna tilting angle in cooperative transmission between sectors are needed. This paper proposes methods to decide the optimal antenna tilting angle in cases of non-cooperative and cooperative transmissions between sectors. The proposed methods use an objective function that maximizes the cell average log rate or the cell average rate for users distributed uniformly within the radius of the sector. Also, the objective function which maximizes the cell average rate determined by adaptive modulation and coding (AMC) used in actual cellular systems is considered. When the cell average rate becomes the objective function, the system rate efficiency increases significantly for both cooperative and non-cooperative transmission. When the cell average log rate and the AMC rate become the objective functions, an optimal antenna tilting decision method which effectively increases the efficiency of cell boundary users is discussed.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2013

With the rising popularity of smart-phones, the supply of Internet protocol television is largely increased and it causes the wireless communication network load to be increased. To overcome such an overloading problem, 3GPP is now working on the standardization of MBMS since LTE Release 6 specification. MBMS has good performance in bandwidth efficiency by sharing the same bandwidth with the mulitple MBMS users having the same content. According to the proposed algorithm, in heterogeneous networks having a dispersed Single-cell MBMS where 3GPP network and Wi-Fi network are mixed, if the number of MBMS users, who are belonging to cells supporting a dispersed Single-cell MBMS, is more than a specified threshold, the MBMS priority policy is operated. Otherwise, the Wi-Fi priority policy is executed. As the simulation results show both the increase of total available bandwidth ratio and the decrease of network usage cost, it is confirmed that the proposed scheme allows the network efficiency to be maximized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3431-3436
• /
• 2013

Band-notched ultra-wideband (UWB) antennas using frequency selective surfaces (FSSs) are presented. The proposed antennas utilized the band rejection characteristic of typical FSS unit cells. We loaded the FSS unit cells on the same plane of planar UWB antenna. These antennas are designed to reject the interference from the wireless local area network band, 5.15-5.825 GHz in the UWB band, 3.1-10.6 GHz. The measured peak gains of the proposed antennas are more than 2 dBi at both operation edge and center frequencies, and sufficient to apply for commercial purpose. The antennas are small size and planar shape for the purpose of the small mobile application, and enhanced design freedom by using various existing FSS unit cells.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.133-142
• /
• 2012

In this paper, we propose and implement a high-speed algorithm for CGH that is to calculate digital hologram by modeling the interference phenomenon for tow lights. This algorithm changes the computation equations into a parallel-computable ones and implements it with a structure consisting of two kinds of cells (initial calculation cell, and update calculation cell). The parallel computation algorithm is to get the rest hologram pixels concurrently after calculation the first hologram column. Here, the initial calculation cells compute the first column of the hologram and the update calculation cells compute the rest of the hologram. The two kinds of cells performs a pipeline operation to complete the operations of the two cells at the same time. A CGH calculator to compute the hole hologram for a light source is structured by arranging the two kinds of cells. Results from simulation showed that the maximum operation frequency is about 215MHz. So, experiments are performed by setting this frequency and the same environments as the method showing the best performance. As the results, the proposed one could complete the computation of 81.75 CGH frames per second, while the previous method computes 62.9 CGH frames per second.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.1
• /
• pp.22-28
• /
• 2015

In this paper, we studied the evolution of behavioral logic of artificial individuals using cell-level evolution framework. We first implemented cell-level evolution framework and then investigated the evolution of behavioral logic that artificial individuals ate foods on the framework. A logic frame for behavioral decisions of artificial individuals was devised and applied to the framework. From extensive tests, we found that most artificial individuals could evolve the behavioral logic that they could eat food in a short generation. It was also confirmed that most behavioral logics showed nearly same behaviors of artificial individuals in most tests. Our method has the differences from existing algorithms using evolutionary algorithms and evolvable hardwares in that it is a basically different approach. These results showed that our framework could be a good tool for investigating the evolution of artificial individuals in a cell-level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1395-1401
• /
• 2014

In an effort to develop and implement an inertial balance with high performance, the response characteristics of a load cell, which are some of the critical parameters for optimal system design, were evaluated using a sample object of approximately 100 g under microgravity conditions. To this end, a 15-m drop-tower was used to produce microgravity conditions, and the response characteristics of the load cell were investigated in terms of the variations in the magnitude of the deceleration of the sample object, noting that the mass of a living animal should be determined in microgravity. An analysis of the ratio of the inertial forces clearly demonstrated that the average velocity of a load cell plate should be higher than 0.5 m/s to meet the design requirements.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.4
• /
• pp.39-46
• /
• 2009

Generally, Path-finding algorithms which use heuristic function may occur a problem of the increase of exploring cost in case of that there is no way determined by heuristic function or there are 2 way more which have almost same cost. In this paper, we propose an abstract graph for path-finding with dynamic information. The abstract graph is a simple graph as real road network is abstracted. The abstract graph is created by fixed-size cells and real road network. Path-finding with the abstract graph is composed of two step searching, path-finding on the abstract graph and on the real road network. We performed path-finding algorithm with the abstract graph against A* algorithm based on fixed-size cells on road network that consists of 106,254 edges. In result of evaluation of performance, cost of exploring in path-finding with the abstract graph is about 3~30% less than A* algorithm based on fixed-size cells. Quality of path in path-finding with the abstract graph is, However, about 1.5~6.6% more than A* algorithm based on fixed-size cells because edges eliminated are not candidates for path-finding.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2016

In this paper, for the improvement of quality of service(QoS) performance of heterogeneous networks, multi-cell scheduling is proposed. In order to implement the proposed algorithm, for the recognition of the impact on the throughput performance of users, macro-pico-cells that form distributed architecture were proposed. In operating heterogeneous networks, considering the centralized structure, a macro-RRH(Remote Radio Head) deployment scenario was proposed. For interference mitigation of the proposed system, by applying the optional sub-frame, through CQI(Channel Quality Indicator) measurement for each sub-frame period, constraint conditions were measured according to system situations. For the simplification, the pattern of the same ABS muting was assumed. In the above two multi-cell environments, the algorithm of high-speed load balancing maintenance was proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.957-966
• /
• 1998

In this paper an imrpoved Signal-to-Interference ratio(SIR)-based call admission control(CAC) algorithm for DS-CDMA cellular system is proposed and its performance is analyzed. This algorithm uses Residual-Capacity defined asthe additional number of initial calls that a base station can accept such that system-wide outage probability will guaranteed to remain below a certain level. the residual capcity at each cell is calculated according to the reverse-link SIR measured not only at the home cell but also the adjacent cells. Then the adjacent cell interference-coupling coefficient .betha. is used. In this work we propose an improved algorithm that .betha. varies according to the traffic load of the home cell. The influence of traffic condition on system performance, namely blocking probability and outage probability, is then examined via simulation. The performance of the improved algorithm is evaluated both under homogeneous and hot spot traffic loads. The results show that the improved algorithm outperforms conventional algorithms under all load values. Under over-load situation, especially, the improved algorithm gives almost constant outage performance the QoS(quality of service) can be guranted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.664-673
• /
• 2014

This paper analyzes the power allocation scheme to maximize the sum-rate for heterogeneous networks based on asynchronous time division duplex. We consider heterogeneous networks where a small cell exists in the macro cell coverage and the small cell and the macro cell share the same time-frequency resources. We formulate the optimization problem which maximizes the sum-rate of the heterogeneous network subject to the target signal-to-interference-plus-noise ratio. We analyze the feasible region in order for the optimal solution to exists and the optimal power allocation scheme for maximizing the sum-rate. Simulation results show that the proposed power allocation schemes outperform the maximum power transmission scheme.