• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.45-56
• /
• 1999

Seismic refracrion and reflection surveys were conducted along an E-W trending track of 482 m long in Ilwall-dong, Pohang. End-on spread was employed as source-receiver configuration with 2 m for both geophone interval and offset. Seismic data were acquired using 24 channels at every shot fired every 2 m along the track. Refraction data were interpreted using equations for multi-horizontal layers. Reflection data were processed in the sequence of trace edit, gain control, CMP sorting, NMO correction, mute, common offset gathering, and filtering to produce a single fold seismic section. There are two layers in shallow subsurface of the study area. Upper layer has the P-wave velocities ranging from 267 to 566 m/s and is interpreted as a layer of unconsolidated sediments. Lower layer has P-wave velocities of 1096-3108 m/s and is interpreted as weathered rock to hard rock. Most of the lower layer classified as soft rock. Upper layer has lateral variations in both P-wave velocity and thickness. The upper layer in the eastern part of the seismic line is 3-5 m thick and has P-wave velocity of 400 m/s in average. The upper layer in the western part is 8-10 m thick and has P-wave velocity of 340 m/s in average. The eastern part is interpreted as unconsolidated beach sand, while the western part is interpreted as infilled soil to develop a construction site. Three fault systems of high angle are imaged in seismic reflection section. It is interpreted that the area between these fault systems are relatively safe. Large buildings should be located in the safe ground condition of no fault and footings should be designed to be in the basement rock of 3-10 m deep below the surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.521-530
• /
• 2009

This study has been made to execute a research in order to lead the improvement of indoor air quality, examining the indoor ventilation characteristics by using a numerical analysis method. To this end an extensive parametric investigation are made according to various external flow variables such as main wind direction and wind speed by season, building layout design, and location of ventilators, etc. in Daedeok Techno Valley, one of large-scaled apartment in Daejeon. It is observed there was a significant difference of main wind direction between summer and winter. The main wind direction in summer was a south wind, and on the contrary the direction in winter is northnorthwest, which is similar to the average main wind direction for 10 years. One of the important calculation results is that the change of wind direction causes a significant effect on the apartment ventilation by the change of pressure difference around each complex of apartment. In case of favorable area of ventilation, the indoor ventilation rate can meet 0.7 ACH from the standard value only with natural ventilation. On the contrary, in other area the value was much lower than the standard value. If the calculation result applies to the design of layout apartment or placement of ventilators, it will be greatly helpful to the energy saving because it can be parallel with the natural ventilation to help securing ventilation rate, not much depending on the mechanical ventilation.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.783-798
• /
• 2004

This experiment were conducted to determine the formation of fatty acid soaps, digestibility and ruminal characteristics when vegetable oils were added. Three Corriedale${\times}$ 3 Latin square design. Sheep were fed one of three diets consisting of alfalfa hay and concentrates in a ratio of 70:30. Dietary treatments were 1) no oil, 2) 7% soybean oil and 3) 7% corn oil. At the end of each experimental period, rumen contents from each sheep were collected before feeding and at 1, 3, 6 and 9h after feeding. pH decreased up to the 3 hour after feeding and increased until the end of the collection(p<0.0001). Whereas the concentration of $NH_3$-N showed inverse changes to pH(p<0.0001). Type of oil did not affect the molar concentration of total VFA, acetate, propionate and butyrate. Acetic/propionic acid (A/P) ratio decreased with increasing time(P<0.0001), but the ratio at the end of the experiment became similar to the initial value. No effects were found in the digestibility of dry matter, total-N, crude fiber, ash, NFE, NDF and ADF. The formation of fatty acid soaps(FAS) increased after feeding than 1 hour before feeding(P<0.05) and increased in 7% oils than no oil addition(P<0.05). Long chain fatty acids formed mainly FAS. ince the formation of FAS might decrease negative effects on ruminal haracteristics and total tract digestibility.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2014

This study had the goal of analyzing the economic feasibility and constructability of a fire resistant curtain wall system using Light-weight Inorganic Composite Foam Board(LI-CFB). LI-CFBs, new materials with excellent fire resistance are being developed for use as the back panel of curtain wall and their fire resistance has already been analyzed through actual tests in earlier studies. In this study, a mock-up test involving the installation of the fire resistant curtain wall system on an actual building was conducted, and the system was compared with a common curtain wall system. This system is applied in the same way as a common curtain wall system. But the cutting LI-CFBs, which are brought from a factory, are used in the system and attached on the frame (mullion and transom). Even though the system requires more working time than the existing system, the LI-CFBs back panels are easy to cut and do not produce dust. Also, the panels are able to be assured the quality by checking damaged parts easily. Besides having a high level of fire resistance, the system's economic feasibility and constructability meets or exceeds those of the existing system.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.71-79
• /
• 2008

It is known that the content of asparagine, an excellent detoxifying substance of alcohols in human body, is the highest in the roots of soy-sprout. At the same time, it is inferred that soy-sprouts producing more roots are better for detoxifying. In this experiment, the effects of room temperatures on number of watering per day, and duration of soy-sprout culture were carefully investigated. Some of the results obtained are as follows; 1. The yield rate of soy-sprouts for Agakong and Pungsannamulkong was continuously increased up to 9 days. It was higher in room temperature of $30^{\circ}C$ than in $20^{\circ}C$ and was the highest at 8th day of culture with 5 times of watering per day. 2. The asparagine content in soy-sprouts of Agakong and Pungsannamulkong was the highest in cotyledon and the lowest in roots. This rate was higher in the room temperature of $20^{\circ}C$ than in $30^{\circ}C$. 3. The highest asparagine content of soy-sprout of Agakong was 18.9%, obtained in the room temperature of $30^{\circ}C$, cultivated for 8 days with 5 times of watering per day. 4. The highest asparagine content of Pungsannamulkong was 18.8%, obtained in hypocotyl cultivated in the room temperature of $30^{\circ}C$ for 8 days with the number of 2 times watering per day. 5. When an cultivation apparatus of 5 liters volume was used, the optimum seed amount for the highest yield rate was 300g for Agakong and 500g for Pungsannamulkong. At the same time, the number of lateral roots showed increasing tendency with more amounts of soybean seeds used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5284-5289
• /
• 2011

This study focused to evaluate thermal transmittance(U-value) performance of sliding type of aluminum alloy window frame(AAWF) with double glazing(DG) and glazing spacer and that without thermal breaker in winter and summer season by two dimensional steady state heat transfer analysis. The AAWE was installed to an existing educational facilities in Seosan area which is the southern region of the Korean Peninsula. Analysis of 2D steady-state heat transfer was performed through the use of BISCO as calculation and simulation program. U-value and temperature factors were calculated. The results are as followed. First, the isotherm simulation shows that AAWF with double glazing have serious differences from recently proposed window thermal performance standards such as Insulation Performance of Windows and Doors of Building Energy Saving Design Standards and the results of calculation of thermal transmittance performance of AAWF and DG are U=9.631 W/$m^2K$, U=2.382 W/$m^2K$ respectively during winter and summer season. Second, the results of analysis of heat transfer analysis, calculated by simulation, shows that 225% of heat is lost comparing with thermal performance standards U=4.0 W/$m^2K$ of general double glazing among those standards on AAWF without thermal breaker.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.205-210
• /
• 2008

Sedum kamtschaticum has been used as one of the native valuable plants for ornamental purpose. This experiment was conducted to find out the optimum media for pot cultured Sedum kamtschaticum using peatmoss and coir-based mixtures. Four mixtures such as peatmoss:perlite(5:5, v/v), peatmoss:perlite(7:3, v/v), coir:perlite(5:5, v/v), and coir:perlite(7:3, v/v) were used. Plants were irrigated with a Sonneveld solution in an ebb & flow system. The content of T-N, K, and Ca in the peatmoss-based media was higher than those of the coir-based media. The concentration of T-N, K, and Ca in the shoots of Sedum kamtschaticum increased when plants were cultured with peatmoss-based media. In the peatmoss-based media, plant growth, such as number of branches, leaf length and shoot fresh and dry weights, were significantly increased than those of plant grown in the coir-based media. As the results, the optimum media for pot cultured Sedum kamtschaticum in an ebb & flow system was considered to be the peatmoss-based mixtures.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.96-104
• /
• 2019

Recently, projects are being actively promoted to develop a new residential district centered around the metropolitan area, or to redevelop the residential area that was established long ago as unplanned land development. In this residential area, the owner can directly construct the building, and the way the building owner builds the residential house is called the direct construction of the owner. If the owner has the construction management (CM) capability while conducting direct management of the owner, the direct construction can be carried out by the CM method. This type of construction is called Owner-CM delivery method. However, it is very rare for small-scale construction in Korea to be implemented by the Owner-CM method. This may be due to the lack of knowledge and experience about the CM of the owner. In this study, we investigated the actual cases of the scheduling for the residential houses of similar size which were built at the same time in the residential housing complex developed near the metropolitan area. The purpose of this study is to derive the success factors of the scheduling in the small-scale construction from the cases carried out by the Owner-CM method. These success factors of the scheduling can be used as meaningful reference for the owners who want to build their own house in the future.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.4-23
• /
• 2014

Seokjojeon Hall is the Neoclassic style building situated in Deoksugung Palace, which was proposed by John McLeavy Brown who was a chief commissioner of the Daehan Empire and designed by John Reginald Hardings in 1897. Construction of the Seokjojeon Hall began in 1900 and completed in 1910 at the total cost of one million won. Decorating and furnishing of the interior was designed by Lovell and all the furniture of Seokjojeon Hall had been purchased from Maple&Co. The Maple&Co was the supplier of luxury furnitures and decorating items for luxurious residentials, hotels, embassies and the palaces and its headquarter was located in London. Ready-made furnitures were purchased as shown in the Maple's catalog. The designs and styles of the west were applied to Seokjojeon Hall. That is one of the aspects showing Daehan Imperial underwent a period of Westernization.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.24-43
• /
• 2018

Thirty-five of Hwaban of Jeongjagak had been built in the last three hundred years, which means a Hwaban was made in almost every ten years. Jeongjagak is a building that requires a certain ornamentation having the identical Gongpo type, called E-ikgong, and maintains the same shape for a long time. While Hwaban is an element that faithfully serves the ornamental role, the field study found that Hwaban-chogak went through various changes over the years unlikely to Jeongjagak. This study enumerates and classifies the various types of Hwaban-chgak by outlining the similarities/differences of the various types of Hwavanchogak, and by discovering what the craftsmen aimed to express through the Hwaban-chogaks. As a result, Hwaban-chogak can be generally divided into two categories depending on the starting point of Chogak: 'Downward-Type' and 'Upward-type' and the study tried to find the origin of that. The first represents the stems of Hwaban crafts flowing from top to bottom, and the latter showing the opposite direction. Around 1740s Upward-type can be chronologically caragorised as; 'original- type' which contains lotus and 'modified- type' which eliminates lotus. It is inferred that the modified-type was caused by the employment system of the craftsmen. It is also recognized that the main frame of Hwaban-chogak had been maintained despite the fact that Chogak became increasingly ornamental for the next a hundred years from the Hwaban-chogak drawings in Whaseong-seongyeog-uigwe, which was completed in 1796. The study has a limitation that the focus of the research is only on the Hwaban of Jeongjagak and expected to look into Hwaban in the context of other construction elements such as Ikgong, Daegong and Anchogong for further studies.