• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.1195-1201
• /
• 2002

Researches on the FRF-based substructuring method have been mainly focused on vibratory response analysis. Present study Is concerned about the application of the method to the dynamic stress analysis of a air-conditioner compressor mounting bracket in a passenger car. This is performed by using reaction forces that can be obtained by the FRF-based substructuring method. The air-conditioner system, composed of a compressor and bracket, Is analyzed by using the FRF-based substructuring method. The experimental and numerical FRFs are combined to calculate the system responses and reaction forces at the connection point. The dynamic reaction forces plugged into the bracket FE model to compute the stresses of the bracket Dynamic strains by the present method are compared with those from strain-gage test for bracket system on shaker. The comparison shows possibility of practical usage of the method for the real problem

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.612-617
• /
• 2014

It is generally known that the automotive road wheel involves the non-proportional multiaxial loading condition, therefore the measuring dynamic stress and strain in driving state is very important to predict an endurance characteristic of the automotive road wheel. In this study, the ultimate driving test using F1 circuit with respect to 2 kinds of velocity conditions have been carried out in order to measure dynamic stress, strain of the wheel and acceleration of a vehicle. Based on the measured results, the characteristics of dynamic stress generation have been analyzed, and factors which have effect on the dynamic stress generation have been studied.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.107-112
• /
• 1998

A great deal of time and effort are required to evaluate the safety and durability of a vehicle structure in the vehicle development stage. It is difficult to find the reasons for cracks which occur in the body and frame of a vehicle during tests. Recently computer aided engineering techniques have been utilized to solve the problems of safety and durability of vehicles. In this study, a dynamic stress analysis is performed on the frame of the vehicle by rigid and flexible multibody dynamics techniques. The result of the analysis is compared to that of the actual test. The full vehicle dynamic models for the rigid and flexible bodies are developed by DADS package. The modal coordinate system is used to save time for the dynamic stress analysis. The flexible multibody dynamic models have 12 normal modes considering the flexibility of the frame. Dynamic stresses arc calculated by relating the stress influence coefficients and the applied forces.

• Tunnel and Underground Space
• /
• v.5 no.3
• /
• pp.230-239
• /
• 1995

암석의 인장강도 실험법의 하나로써 새롭게 개발된 Hoop Test에 대한 이론적 뒷받침을 하고자 유한요소법을 사용하여 응력분포를 해석하였다. 간단하며 사용하기 편리한 실험장치이지만 시료가공시 생길 수 있는 내부공의 지름에 대한 오차, 재부공벽면과 하중장치외벽과의 마찰 등이 있어 이들로부터 발생할 오차를 평가해 보았다. 또한 시료의 안지름과 바깥지름의 비율이 응력의 크기에 끼치는 영향을 조사하였다. 응력해석결과, 일반적인 시료준바에 필요한 주의만 기울이면 실험치에 별다른 영향을 주지않는 것으로 제안되었고 이는 그동안의 실험결과의 신뢰성을 이론적으로 보충해 주었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2092-2099
• /
• 2013

Through the data transfer race in industry since 1990s, the operational speed of optical disk drive(ODD) becomes commonly over 10,000 rpm. Such high speed operation inevitably causes the vibration, which is also the disturbances in the read-write process of pick-up servo-controller. Generally the vibration disturbance problem can be solved by the vibration isolation using the rubber mount and the increase of robustness of the pick-up servo-controller. Optical disk itself has not been targeted for the vibration reduction, because it is manufactured under the standardized format. In this paper we focused on the increase of critical speed of optical disk, that is, the improvement of dynamic characteristics, with the control of residual stresses which are come from the injection molding process. To do this, first, the residual stresses induced from the injection molding process are calculated using finite element method. The major design parameters of the process conditions are flow rate and melt temperature, which control the residual stresses in optical disk. Second, the critical speed of optical disk is calculated with modal analysis considering residual stress distributions. It was found out that the critical speed can be improved by the control of operational parameters in the injection molding process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1339-1344
• /
• 2010

MSM (Modal Superposition Method) is a technique for analyzing structural durability by taking the vibration characteristics into consideration. In this paper, MSR (Modal Stress Recovery) method, which is similar to MSM, was reviewed to check its validity as a durability analysis method. The MSR method directly calculates the modal displacement time history in multibody dynamics analysis; as a result, the total analysis time is shorter than that of MSM method. We conduct durability analysis using the MSR method and a durability test of a torsion beam axle that is affected by various road loads within the natural frequency of the beam axle. The analysis results for critical location and durability were in good agreement with the respective test results. Therefore, durability analysis using the MSR method is effective in predicting the durability of the structures of various dynamic systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4769-4775
• /
• 2014

This paper discusses the dynamics stress of each boom, which occurs as a result of the conflicts on a multi-joint boom at the end effector and structure. In this process, CATIA was applied to create 3D modeling, ADAMS and ANSYS were then performed using mesh analysis by obtaining the stress data to create a MNF(Modal Neutral File) of multi-joint boom. Two types of MNF models were analyzed using ADAMS FFT(Fast Fourier Transform) performing to check the validity of each model. In this process, the models were verified by ADAMS, which performs the dynamic characteristics of conflict. The ADAMS Durability was used to analyze the maximum stress between the multi-joint boom and structure.

• Journal of the korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.5-8
• /
• 1980

스트레인 게이지를 사용하여 회전체의 스트레인을 측정할 경우, 회전체 내에 브리지를 구성하여 브리지의 4점의 입출력단을 슬립 링을 매개로 정지 쪽으로 끌어내어 측정하는 것이 일반적으로 상용되고 있는 방법이다. 이 방법에 의하면 1측정점에 대하여 4소자의 슬립 링을 필요로 하기 때문에 다수점의 스트레인 측정은 곤란하다. 그래서 브리지를 셰브론 브리지식으로 구성하면 슬립링수를 대폭 줄일 수 있다. 그러나 이 방법은 다음의 이유로 인하여 측정 정밀도가 저하하는 결점이 있다. (1) 종래의 동응력 측정기는 입력 임피이던스가 작기 때문에 각 채널간에서 간섭을 일으킨다. (2) 채널간의 간섭은 공통브리지 저항값의 크기에 따라서도 영향을 받는다. 이 저항값이 작을수록 간섭량은 감소되기 때문에 이것을 작게 하면 브리지의 합성저항이 작아 지고, 브리지전원공급용 슬립 링의 접촉저항의 영향이 커진다. 그래서 셰브론 브리지식으로 슬립 링을 감소시키는 동시에 위에 말한 결점을 없앤 새로운 다점응력 측정기를 개발했다. 이 스트 레인측정기는 종래의 동스트레인 측정기와 다른 중요한 점은 다음의 두가지이다. (1) 증폭기의 입력임피이던스(impedance)를 크게 (약 50k.ohm.)하는 동시에 공통브리지의 저항을 작게 (약 10.ohm.)하고, 각 채널간의 간섭을 없앴다. (2) 브리지전원공급용 슬립 링의 접촉저항에는 관계없이 브리지에는 항상 일정한 전압이 공급 되게 했다. 본 보고에서는 (1)에 대한 검토는 생략하고, 주로 (2)에 대하여 기술한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.805-813
• /
• 2011

The dynamic stress of the diesel engine block is analyzed by using flexible-body dynamic analysis. Multiple loadings including the pressure load due to gas combustion, thermal load, and dynamic load are considered. Thermal load is assumed constant, however, pressure load and dynamic load are treated as time dependent. The present work is focused on the dynamic stress analysis, especially on finding critical points of the engine block. The analysis model includes four parts - engine block, generator, bed, and mounts. On the other hand, crank shaft, pistons, and main bearings are excluded from the model. However, their dynamic effects are applied by dynamic forces, obtained in the separate analysis. Dynamic stress is found by using flexible body dynamic analysis, and compared to the measured data.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.531-541
• /
• 2009

The research analyzes and investigates conventional concrete, hydration heat, set, and mechanical properties by making high flowing self-compacting concretes of binary blend and ternary blend as one of evaluations about the properties of the hydration heat of high flowing self-compacting concrete with a strength of 30, 50, and 70 MPa. In addition, it estimates concrete adiabatic temperatures by calculating a thermal property value of powder obtained by measuring a heat evolution amount for powder used in concrete, a thermal property value of concrete obtained by conducting a simple adiabatic temperature test, and a normal thermal property value of material used in concrete, using a simple equation. Moreover, it analyzes and investigates the hydration heat property of high flowing self-compacting concrete and the thermal stress caused by hydration heat by conducting a 3D temperature stress analysis for the hydration heat and the adiabatic temperature obtained by temperature analysis, using MIDAS CIVIL 06 program.