• Economic and Environmental Geology
• /
• v.48 no.6
• /
• pp.537-543
• /
• 2015

In Korea, the use of world geodetic system(WGS) has been mandated in year 2010. Accordingly, the national geographic information institute(NGIS) provides the digital maps according to the WGS. Nevertheless, most of the digital geological maps are still based on the Tokyo Datum(TD). Therefore, users should conduct 2D/3D geological spatial analysis after converting the coordinates of digital geological maps to WGS. The conversion process is often tedious and troublesome for certain users. Therefore, in this study, the method to transform coordinate from TD to WGS using ArcToolbox is introduced for users not familiar with the process. For a better appreciation, the Chungju and Hwanggang-ri digital sheets of 1:50,000 scale was chosen as an example. Here, Chungju and Hwanggang-ri sheets were defined based on the TD-central origin and TD-east origin, respectively. The two sheets were merged after the transformation of TD-east origin of Hwanggang-ri to the TD-central origin, and eventually transformed to WGS-central origin. The merged map was found to match exactly with the digital map(Daeso 367041). The problem of coordinate determination in previous digital geological maps was solved effectively. The proposed method is believed to be helpful to 2D/3D geological spatial analysis of various geological thematic maps.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.613-623
• /
• 2007

The main purpose of this study is to investigate the coordinate transformation based on two different systems between local geodetic datum(tokyo datum) and international geocentric datum(new Korea geodetic datum). For this purpose, three methods were used to determine seven parameters as follows: Bursa-Wolf model, Molodensky-Badekas model, and Veis model. Also, we adopted multiple regression equation method to convert from Tokyo datum to KTRF. We used 935 control points as a common points and applied gross error analysis for detecting the outlier among those control points. The coordinate transformation was carried out using similarity transformation applied the obtained seven parameters and the precision of transformed coordinate was evaluated about 9,917 third or forth order control points. From these results, it was found that Bursa-Wolf model and Molodensky-Badekas model are more suitable than other for the determination of transformation parameters in Korea. And, transforming accuracy using MRE is lower than other similarity transformation model.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.402-403
• /
• 2008

한전의 신배전정보시스템(NDIS)은 지리정보시스템(GIS)을 활용하여 전국에 시설되어 있는 방대한 배전설비를 데이터베이스로 구축한 후 배전계획, 배전설계, 공사관리, 준공정산, 자산취득, 유지보수 등 배전분야 전반의 업무를 수행하고 고객정보시스템과 연계하여 영업업무를 지원하는 시스템으로 저압공급방안검토, 고압계통분석, 보호협조검토, Simulation 등 배전분야에서 필요한 다양한 기술지원 기능과 경제적인 투자계획, 효율적인 유지보수 등을 위한 배전통계 및 자원정보 등 장기적 관점의 경영정보 인프라를 구축하여 배전설계에서 준공까지 업무흐름 표준화, 업무처리 절차, 방법 등을 시스템에서 자동 지원토록하여 반복적인 배전정보 관리업무의 정확도 향상을 목적으로 만들어진 시스템이다. 신배전 정보시스템의 배전설비는 모두 위치값을 가지고 있는데 지중배전설비는 위치에 대한 측량 및 탐사를 시행하여 신배전정보시스템에 DB입력하여 사용하고 있으며 이 입력 좌표체계는 한정된 일부지역에서만 사용할 수 있는 동경측지계를 사용하고 있다. 2010년 부터는 이동 경측지계를 전 세계적으로 GPS측량값을 그대로 적용할 수 있는 세계 측지계로 사용토록 측량법에 명시되어 있어 신배전정보시스템의 배전설비를 전환 프로그램을 개발하여 전환하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.2
• /
• pp.125-133
• /
• 1995

The geoidal heights of a country may be computed from astrogedetic, gravimetric or satellite data. In this paper, the geoid models to the Bessel ellipsoid(KGM95-A) have been determined by the astrogedetic method, which is surface fitting techniques using deflections of the vertical and geoid height constraints. Transformation equations and the gravimetric geocentric geoid(KGM93-C) were applied to obtain the geoid height referred to the Tokyo Datum of the Korean geodetic network, the comparison of the astrogedetic results and discussions of the geoid information were added.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.167-173
• /
• 2011

This paper analyzes the procedure of calculating how the results of national control points (triangulation points), based on Bessel datum, have been transformed into those of KGD2002, based on the world geodetic system. GPS and EDM data observed from 1974 to 2008 were used for this purpose. A large-scale integrated GPS network was constructed to estimate the results of KGD2002 and new national control points about 12,000 were decided through multiple stages of data processing. The accuracy of these results is ${\pm}0.015m$ (95%) in the horizontal direction and ${\pm}0.030m$ (95%) in the vertical direction. The adjusted results verified by the construction of an integrated GPS/EDM network were compared with the results of KGD2002. In conclusion, the bulletin results are thought to be appropriate because the coordinate differences (RMSE) are ${\pm}0.0025m$ and ${\pm}0.008m$ in horizontal and vertical directions respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.393-398
• /
• 2007

According to the Korean datum change to a world geodetic system, the EDM area should be readjusted to provide consistent product over the country. The data set for EDM area is extracted from the previous KTN1987 DB and checked for the moved markers in XY network adjustment which provides quality verification. Then, EDM data set for the seven areas are rebuilt for the adjustment. Since the data is still based on the old datum, the coordinates of the data are transformed by applying the coordinate transformation parameters. Here, the transformation parameters, which were determined for the conversion of 1:50,000 topographic maps by NGII, were used. For each EDM point, the geoidal height from EGM96 model is applied to obtain the ellipsoidal height based on the GRS80. The measured distance projected onto GRS80 is adjusted using BL network adjustment by fixing 2nd order or 3rd order GPS control points. The results from the readjustment show the minimum standard error of 1.37" and the maximum standard error of 2.13". Considering the measurement accuracy of EDM (1.6" corresponding to about 2cm) and GPS position for fixed points (2cm), this result is considered to be reasonable and it is good for the practical use.