• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.57-66
• /
• 2010

In reviewing 'Dongkukesangkukjip(東國李相國集)' a selection of prose and poetry describing Toesikje, the house of Kee Heung-soo, a military official in the middle Goryeo Dynasty, the outcome of the study intended to infer garden scenery and landscape culture managed and possessed by high society at that time is outlined as follows. First, Kee Heung-soo, the owner of the house and Lee Kyu-bo, the author of Toesikje Palryeng(退食齋八詠) are thought to be those who first designated the 8 scenic points and recreated the concept of public enjoyment of into the concept of personal enjoyment in Korea. Second, the spatial configuration of the Toesikje garden is presumed to be in the Gee-Seung-Jeon-Gyul(introduction-development-turn-conclusion) style in which a fairyland is built to enjoy a free and peaceful life, while anticipating coming days and pursuing creation-prosperity-transcendence-return. Third, the viewpoint structure of the scenery Wongyeong(Toesikje), Donggyeong(Youngcheondong), Cheonggyeong(Cheokseojung), Myunggyeong(Dokrakwon), Jingyeong(Yeonmukdang), Sigyeong(Yeoneuiji), Yunggyeong(Nokgunheon), and Hyungyeong(Daehoseok) contains a symbolic universal vision of Palchejigyeongsek(the 8 scenic points) which incorporates Samwon(heaven, earth and water) and Obangwi(orientations), and the harmonization principle of the scenic points where the building and garden are harmonized. Fourth, Je, Dang, and Heon, Jeong(齋, 堂, 軒, 亭) are introduced to the garden, and Geehwayeecho, Jingeumgeesoo, Gasan and Goeseok(stone) were used in a variety of ways. Fifth, it was found that the management of Shinseongyeong and enjoyment of Yoosanggoksu events, with the study and seeking of perfect knowledge and discipline, wandering and rest led to a sublime appreciation of aesthetic beauty and divine glory. Sixth, a miniature garden was built to enjoy the view from above, together with the view in the distance, and a culture of secluded living, along with scenery expressing the heart's desire for Utopia was induced.

• Journal of Nutrition and Health
• /
• v.44 no.1
• /
• pp.49-60
• /
• 2011

This study was performed to develop a children's dietary life safety index required by the Special Act on Safety Management of Children's Dietary Life enacted in 2009. An analytical hierarchy process was used to obtain initial weights of dietary life safety evaluation indicators. The Delphi method was applied to develop the weights along with 98 food and nutrition professionals. Three representative policy indicators, nine strategy indicators, 11 main evaluation indicators, and 20 detailed evaluation indicators were selected for the children's dietary life safety assessment. Three policy indicators and nine strategy indicators were the following: children's food safety indicator (support level of children' safety, safety management level of children's favorite foods, and safety management level of institutional food service), children's nutrition safety indicator (management level of missing meals and obesity, nutrition management level of children's favorite foods, and nutrition management level of institutional food service), and children's perception and practice level indicator ("Dietary Life Law" perception level, perception, and practice level for dietary life safety management, perception, and practice level for nutrition management). Weights of 40%, 40%, and 20% were given for the three representative policy indicators. The relative importance of nine strategic indicators, which were determined by the Delphi method is as follows: For children’s food safety, support level of children's safety, safety management level of children's favorite foods, and safety management level of institutional food service were given weights of 12%, 9%, and 19%, respectively. For children's nutrition safety, the missing meals and obesity management level, nutrition management level of children's favorite foods, and the nutrition management level of institutional food service were given weights of 13%, 11%, and 16%, respectively. The "Dietary Life Law" perception level, perception and practice level of dietary life safety management, and perception and practice level of nutrition management were given weights of 4%, 7%, and 9%, respectively.

• Journal of Nutrition and Health
• /
• v.51 no.1
• /
• pp.87-102
• /
• 2018

Purpose: The purpose of this study was to develop a valid instrument for measuring the dietary quality and behaviors of Korean elderly. Methods: The development of the Nutrition Quotient for Elderly (NQ-E) was conducted in three steps: item generation, item reduction, and validation. The 41 items of the NQ-E checklist were derived from a systematic literature review, expert in-depth interviews, statistical analyses of the fifth Korean National Health and Nutrition Examination Survey data, and national nutrition policies and recommendations. Pearson's correlation was used to determine the level of agreement between the questionnaires and nutrient intake level, and 24 items were selected for a nationwide survey. A total of 1,000 nationwide elderly subjects completed the checklist questionnaire. The construct validity of the NQ-E was assessed using confirmatory factor analysis, LISREL. Results: The nineteen checklist items were used as final items for NQ-E. Checklist items were composed of four-factors: food behavior (6 items), balance (4 items), diversity (6 items), and moderation (3 items). The standardized path coefficients were used as the weights of the items. The NQ-E and four-factor scores were calculated according to the obtained weights of the questionnaire items. Conclusion: NQ-E would be a useful tool for assessing the food behavior and dietary quality of the elderly.

• Current Research on Agriculture and Life Sciences
• /
• v.13
• /
• pp.31-44
• /
• 1995

Mt. Kumjeong is located in south-eastern part of the Korean Peninsular($129^{\circ}$01' to $129^{\circ}$05' E, $35^{\circ}$03' to $35^{\circ}$17' N) and the altitude of the summit is 802 meter. In order to find out the vegetation units which made it possible to classify subtropical forest and south-temperate forest, Mt. Kumjeong (which is located in a border of between subtropical forest and south-temperate forest) was selected as a study area. The primary result of actual vegetation analysis in Mt. Kumjeong based upon the vegetation community analysis methods by the ZM-school, and the relationships between vegetation community and two parameters(altitude, topography) analyzed by using coincidence analysis method were summarized as followings. 1. Based upon analytic methods of the vegetation community by the ZM-schools, the primary analytic result of the analysis of vegetation community in Mt. Kumjeong was divided into 10 communities, 9 groups, 2 subgroups. 2. Eurya japonica group of Pinus densiflora community out of 16 vegetation units was thought as a indicator vegetation group which made it possible to border subtropical forest and south-temperate forest. 3. Natural regeneration of Stewartia koreana group was thought to be difficult because seedling and sapling was rarely showed, 4. In relationship between vegetation units and altitude, Carpinus tschonoskii community, Quercus variabilis community, Quercus serrata community, Wisteria floribunda community,. Eurya japonica group of Pinus densiflora community, Pinus thunbergii community mainly distributed below altitude 500 meter, and Quercus mongolica community, Typical group of Pinus densiflora community, Quercus dentata community, Carpinus coreana community, Quercus acutissima community mainly distributed above altitude 500 meter. 5. In relationship between vegetation units and topography, Carpinus tschonoskii community, Quercus variabilis community, Quercus serrata community, Wisteria floribunda community,. Eurya japonica group of Pinus densiflora community distributed below middle slope, Quercus mongolica community, Typical group of Pinus densifiora community, Quercus dentata community, Carpinus coreana community, Pinus thunbergii community Quercus acutissima communily clistributed above midclle slope.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.495-505
• /
• 2006

In order to classify aerosol type, Aerosol Optical Thickness (AOT) and Fine mode Fraction (FF), which is the optical thickness ratio of small particles$(<1{\mu}m)$ to total particles, data from MODIS (MODerate Imaging Spectraradiometer) aerosol products were analyzed over North-East Asia during one year period of 2005. A study area was in the ocean region of $20^{\circ}N\sim50^{\circ}N$ and $110^{\circ}E\simt50^{\circ}E$. Three main atmospheric aerosols such as dust, sea-salt, and pollution can be classified by using the relationship between AOT and FF. Dust aerosol has frequently observed over the study area with relatively high aerosol loading (AOT>0.3) of large particles (FF<0.65) and its contribution to total AOT in spring was up to 24.0%. Pollution aerosol, which is originated from anthropogenic sources as well as a natural process like biomass burning, has observed in the regime of high FF (>0.65) with wide AOT variation. Average pollution AOT was $0.31{\pm}0.05$ and its contribution to total AOT was 79.8% in summer. Characteristic of sea-salt aerosol was identified with low AOT (<0.3), almost below 0.1, and slightly higher FF than dust and lower FF than pollution. Seasonal analysis results show that maximum AOT $(0.33{\pm}0.11)$ with FF $(0.66{\pm}0.21)$ in spring and minimum AOT $(0.19{\pm}0.05)$, FF $(0.60{\pm}0.14)$ in fall were observed in the study area. Spatial characteristic was that AOT increasing trend is observed as closing to the eastern part of China due to transport of aerosols from China by the prevailing westerlies.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.17-52
• /
• 2018

The purpose of this paper is to measure the clustering change and analyze empirical results. Additionally, by using k-means, hierarchical, and mixed models on Asian container ports over the period 2006-2015, the study aims to form a cluster comprising Busan, Incheon, and Gwangyang ports. The models consider the number of cranes, depth, birth length, and total area as inputs and container twenty-foot equivalent units(TEU) as output. Following are the main empirical results. First, ranking order according to the increasing ratio during the 10 years analysis shows that the value for average linkage(AL), mixed ward, rule of thumb(RT)& elbow, ward, and mixed AL are 42.04% up, 35.01% up, 30.47%up, and 23.65% up, respectively. Second, according to the RT and elbow models, the three Korean ports can be clustered with Asian ports in the following manner: Busan Port(Hong Kong, Guangzhou, Qingdao, and Singapore), Incheon Port(Tokyo, Nagoya, Osaka, Manila, and Bangkok), and Gwangyang Port(Gungzhou, Ningbo, Qingdao, and Kasiung). Third, optimal clustering numbers are as follows: AL(6), Mixed Ward(5), RT&elbow(4), Ward(5), and Mixed AL(6). Fourth, empirical clustering results match with those of questionnaire-Busan Port(80%), Incheon Port(17%), and Gwangyang Port(50%). The policy implication is that related parties of Korean seaports should introduce port improvement plans like the benchmarking of clustered seaports.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.134-151
• /
• 2014

This paper deals with a review of the structure and production techniques of the Dried-lacquer Amitabha Buddha statue enshrined in Geungnakjeon Hall of Simhyangsa Temple, located in Daeho-dong, Naju-si, Jeollanam-do, Korea. To achieve this goal, X-ray date and two rounds of field research were performed. The data collected were reviewed, and a sample peeled off from the damaged part was analyzed to investigate the structure and material of the background layer. The results revealed that the Simhyangsa Temple Buddha statue was an almost empty Dried-lacquer(Hyeopjeo) Buddha statue where wood core had not been framed and inserted in the statue. It was thus observed that considering that the clothes wrinkles clearly remained, the same one as the irregularity of the outer clothes wrinkles, the Dried-lacquer layer was lifted made in an almost complete shape in the process of forming the clay figure as the origin form. The statue was found to be diagonally incised from the top of the head to the back of the neck to remove the clay and wood core. But in other sites, no incision was confirmed. It was observed that on the site of the head where the incision was made, an adhesives(lacquer or paste) was used. In addition, the black eyes were impacted with beads and the ears, hands, bands, and knots were made of wood. These features are identically shown in the Dried-lacquer Amitabha Buddha statue from Seonguksa Temple, known as a work of the late Goryeo dynasty; the Seated Dried-lacquer Buddha statue in Okura Museum of Art in Tokyo, Japan; the Seated Dried-lacquer Amitabha Buddha statue from Jungnimsa Temple, know as a work of the early Joseon dynasty; and the Seated Vairocana Buddha statue in Bulhoesa Temple, the Seated Dried-lacquer Amitabha Buddha and the Seated Dried-lacquer Buddha statue from Silsangsa Temple. The analysis of the back layer demonstrated that the ground layer and the red lacquer were the production of the time. In particular, the bone ash used for the ground layer was also coated for the ground layer of Buddha statues as well as for the production of the lacquerware during the Goryeo dynasty. It was also found that gold mending was conducted more than twice even in modern times and that the layer of the production time was well preserved despite gold mending several times.

• Journal of Climate Change Research
• /
• v.1 no.1
• /
• pp.31-50
• /
• 2010

The Arctic climate change for the Last Glacial Maximum(LGM) occurred at 21,000 years ago (21ka) was investigated using simulation results of atmosphere-ocean coupled models from the second phase of the Paleoclimate Modelling Intercomparison Program(PMIP2). In the analysis, we used seven models, the NCAR CCSM of USA, ECHAM3-MPIOM of German Max-Planxk Institute, HadCM3M2 of UK Met Office, IPSL-CM4 of France Laplace Institute, CNRM-CM3 of France Meteorological Institute, MIROC3.2 of Japan CCSR at University of Tokyo, and FGOALS of China Institute of Atmospheric Physics. All the seven models reproduces the Arctic climate features found in the present climate at 0ka(pre-industrial time) in a reasonable degree in comparison to observations. During the LGM, the atmospheric $CO_2$ concentration and other greenhouse gases were reduced, the ice sheets were expanded over North America and northern Europe, the sea level was lowered by about 120m, and orbital parameters were slightly different. These boundary conditions were implemented to simulated LGM climate. With the implemented LGM conditions, the biggest temperature reduction by more than $24^{\circ}C$ is found over North America and northern Europe owing to ice albedo feedback and the change in lapse rate by high elevation. Besides, the expansion of ice sheets leads to the marked temperature reduction by more then $10^{\circ}C$ over the Arctic Ocean. The temperature reduction in northern winter is larger than in summer around the Arctic and the annual mean temperature is reduced by about $14^{\circ}C$. Compared to low mid-latitudes, the temperature reduction is much larger in high northern altitudes in the LGM. This results mirror the larger warming around the Artic in recent century. We could draw some information for the future under global warming from the knowledge of the LGM.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.332-350
• /
• 2019

Zonal hydrographic section measurements at $39.7^{\circ}N$ were conducted between $129.0^{\circ}E$ and $131.3^{\circ}E$ from August 7 to 25 in 2017 using an underwater glider. The glider traveled about 440 km for about 18 days along the 106 line of the regular shipboard measurements in the National Institute of Fishery Science (NIFS) and obtained twice a hydrographic section with high horizontal resolution. Even under the strong East Korea Warm Current with maximum speed of 0.8 m/s across the section, the glider successfully maintained the designated path within an RMS distance of 400 m. By comparing with the NIFS shipboard hydrographic section, it is confirmed that high spatial resolution measurements obtained from a glider were necessary to properly observe front and eddy variability in the East Sea where a typical spatial scale is smaller than the open oceans. From the glider section measurements, a new lens-shaped eddy was found in the thermocline. The lens-shaped anticyclonic eddy had 10~13 km in horizonal width and about 200 m in height like a typical submesoscale eddy resided within the thermocline, which was firstly named as Korea intrathermocline eddy (Keddy). The Keddy has the distinguishing characteristics of a typical intrathermocline eddy, such as a central core with anomalously weak stratification, a convex shaped lens bounded by the stratification anomaly, an interior maximum of velocity at 170 m, no surface appearance of the geopotential field, a small or comparable horizontal width relative to the first baroclinic Rossby radius of deformation, and the Rossby nubmer of 0.7.