• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.82-82
• /
• 2011

현재 도로 포장 설계시 동결심도의 결정은 30년간 관측한 기상자료 분석을 통해서 얻은 동결지수를 근거로 하여 동결심도를 산정한다. 그러나 기후 온난화 현상 등 변화된 기상조건과 대기온도를 근거로 작성된 동결지수와 대기온도에 따른 실제 포장 내부의 온도 변화를 반영하지 못하고 있다. 따라서, 본 연구에서는 설계시 산정된 동결심도와 실제 현장의 동결심도의 차이를 확인하기 위하여 한반도 북부지역을 동결지수에 따라 동결지수 $550{\sim}650^{\circ}C{\cdot}$일, $450{\sim}550^{\circ}C{\cdot}$일, $350{\sim}450^{\circ}C{\cdot}$일, $350^{\circ}C{\cdot}$일 이하로 구분하여 15개 지역을 선정하였고, 각 지역별로 절토부, 절성경계부, 저성토부(2m 이하 성토부) 구간으로 45단면을 구분하여 현장계측시스템을 구축하였다. 그리고 현장계측시스템으로부터 얻어진 대기온도와 포장층별 온도를 이용하여 현장 동결심도를 산정하고 동결심도 산정식의 동결심도와 비교하였다. 또한, 현장 동결심도를 이용하여 동결심도선도를 작성하였다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.83-83
• /
• 2011

도로의 동상방지층을 설치하기 위하여 동결관입깊이를 산정하며, 동결지수는 대기온도의 강도와 지속시간의 누가영향으로 표시된다. 대기온도는 일평균 대기온도를 사용하며 4개/일 평균(대기온도$_4$)을 사용하는 것이 일반적이지만, 현재 기상청에서 제공하고 있는 일평균 대기온도는 8개/일(대기온도$_8$)를 제공하고 있다. 이러한 일평균 대기온도의 산정하는 방법이 동결지수의 산정결과에 미치는 영향을 확인하기 위하여 한반도 남부지역(동결지수 $350^{\circ}C{\cdot}$일) 미만 6개지역을 저성토부, 절성경계부 및 절토부로 구분하여 15개소에 대하여 현장계측시스템을 구축하였다. 그리고 현장계측 시스템으로부터 얻어진 대기온도를 통하여 동결지수를 산정하여 비교하였다. 동결지수 비교결과 일반적으로 일평균 대기온도$_4$를 사용한 경우가 일평균 대기온도$_8$을 사용하는 경우보다 약 3% 전후 큰 것으로 나타나났으며, 6개 지역의 동결지수를 결정할 때 대기온도$_8$을 사용한 동결지수를 보정할 수 있는 보정식을 제안하였다.

• Bulletin of Food Technology
• /
• v.25 no.2
• /
• pp.116-128
• /
• 2012

식품동결에 의한 품질손상에 있어 크게 영향을 미치는 인자 중의 하나가 체적변화에 의한 조직 파괴이므로 식육 및 과채류의 냉동시 내부압력에 따른 조직파괴를 방지하기 위한 기초연구로 다양한 동결방법에 따른 내부압력 변화에 대하여 조사한 결과, 급속 및 완만동결시 우육의 내부압력 변화 경향은 동결 직전에 급격히 상승한 후 동결 초기부터 최대빙결정생성대를 통과하는 동안은 급격히 감소하다가 다시 온도가 내려감에 따라 압력변화는 증가와 감소를 반복하여 상승하는 경향을 보여 주었고, 동결시의 내부압력 크기는 약 8~10 psig 수준이며, 내부압력의 변화 경향은 정지공기식보다 침지식에서 약 1 psig 정도 크게 나타났다. 냉동냉장시에 일어나는 내부압력의 상하변화는 돈육의 품온차가 ${\pm}1^{\circ}C$일 때, 시료중량에 따라 1.84~2.32 psig 정도의 내부압력 차가 반복적으로 발생됨을 알 수 있었다. 또한, 돈육의 해동시 내부압력은 해동 개시 후 급격히 상승하여 5분 이내에 최고압력에 도달한 이후에는 서서히 하강하였으며, 해동시에 발생한 내부압력의 값은 동결시의 내부압력 값보다도 대부분 크게 나타났다. 또한, 균온처리한 우육의 동결시 내부압력 값은 약 1~4 psig 수준으로 균온처리하지 않은 우육에 비하여 매우 적게 나타났으며, 동결소요시간도 약 10~20% 정도 짧게 나타났다. 그리고 균온처리 및 다양한 동결방법에 따른 동결식육의 조직과 냉동냉장 중의 품질변화를 비교 검토한 결과, 동결방법에 따른 드립손실율은 우육의 경우 정지공기식으로 처리한 시료는 타 처리구에 비해 계속 높게 나타났으며, 돈육은 우육에 비해 상대적으로 드립손실량이 적게 나타났으나 송풍식으로 처리한 시료에서 저장 40일째, 7.39%로 가장 높게 나타났다. 동결 우육 및 돈육의 pH변화는 뚜렷한 차이를 나타내지 않았으며, VBN 및 TBA값에 있어서는 균온 처리한 시료가 완만 및 급속동결 처리한 타 시료에 비해 저장 200일까지 가장 변화가 없었다. 동결저장온도의 상하변동에 있어서는 온도변동 횟수가 증가할수록 pH 및 수분함량은 뚜렷한 변화가 없었으나 드립손실율, VBN 및 TBA값은 온도 변동횟수가 증가할수록 서서히 증가하는 경향을 보여 주었다.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.51-60
• /
• 2012

In order to characterize the shear strength of the frozen sand for foundation design in cold region and prediction of adfreeze bond strength, many researchers developed test techniques and carried out many tests to analyze shear strength properties of the frozen sand for half a century. However, many studies for shear strength properties of the frozen sand have been carried out with limited circumstances, even though shear strength of the froze sand can be affected by various influence factors such as soil type, temperature conditions, and magnitude of normal stress. In this study, direct shear test equipment was used to analyze the shear strength characteristics of the frozen sand. Direct shear test equipment was designed for cold weather, and the direct shear tests were carried out inside of large-scaled low temperature chamber. Three soil types-two uniform sands and one well graded soil were used to analyze the shear strength of the frozen sand with three different temperature conditions and three different vertical confining pressures. In this research, a series of direct shear tests for shear strength of the frozen sand have been conducted to demonstrate the efficiency of effectiveness of the test equipment and low temperature chamber. This research also showed that shear strength of the froze sand increased with decreasing temperature condition, but the influence of vertical confining pressure was insignificant to the shear strength of the frozen sand.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.109-121
• /
• 2012

Rock-surface temperatures were observed at a trachytic lava dome, called as Baeknokdam Northwest Face, in the summit area of Mt. Halla, Jeju Island, to examine the frequency and occurrence season of freeze-thaw cycles and the rate of temperature changes during a freezing period. Long-term measurements were recorded over 18 months from November 2006 to April 2008, at a 1-hour logging interval and rock depth of 1.5 cm. Both diurnal freeze-thaw cycles and effective freeze-thaw cycles appear in larger numbers on a south-facing rock face than a north-facing rock face. The diurnal cycles were dominantly observed on February and March for the south face and on November and April for the north face, respectively. The annual freeze-thaw cycles were confirmed in terms of the presence of seasonal freezing periods lasting from mid-November to mid-April for the south face and from early-November to late-April for the north face, respectively. The rate of decreasing temperatures during the seasonal freezing periods is larger on the north face than the south face. Notwithstanding the lower numbers of freeze-thaw events, the north face experiences a higher frost intensity since the number of hours below $-3^{\circ}C$ is larger on the north face than the south face. The number of freeze-thaw events and the duration of days with continuous sub-zero rock temperatures largely depend on the solar radiation controlled by the aspect of the monitored rock surfaces, and thus the high-frequency short-term frost cycle dominantly appears on the south face and the annual frost cycle on the north face, respectively.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.8
• /
• pp.7-15
• /
• 2022

Most studies have conducted cryogenic triaxial compression tests with frozen specimens prepared in a separate mold by one-directional freezing. This method has the potential to generate residual stress in a frozen specimen and cannot be adopted to simulate the application of the artificial ground freezing method in the field. Therefore, in this study, novel equipment and procedure for the cryogenic triaxial compression test were proposed to overcome the limitations of existing test methods. Therefore, the mechanical characteristics of frozen sand, considering the effect of temperature and confining pressure, were evaluated. As the freezing temperature decreased, the brittleness of frozen sand increased, and the strength increased due to a decrease in the unfrozen water content and an increase in the ice strength. A higher confining pressure resulted in an increase in interparticle friction and the pressure melting phenomenon, which caused strength reduction. Thus, it was found that the mechanical behaviors of frozen sand were simultaneously affected by both temperature and confining pressure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.433-439
• /
• 2011

The frost depth(frost penetration) is used to install anti-frost heave layers in pavement designs. The freezing index is calculated by an annual accumulated value of multiplying the period of time with temperatures below zero, and the corresponding temperature. Therefore, the DAAT(daily average air temperature) calculation method may play an effect on the FI(freezing index). The Weather Observatory used to supply 4 average air temperatures per day, but currently supplies 8 per day. With this study, we divided the southern part(below FI=$350^{\circ}C{\cdot}day$) of the Korean peninsula into 6 areas according to site conditions(low embankment, embankment-cutting slope, and the cutting slope) and established a field measurement system for 15 positions to check the effects on the result of FI according to differing DAAT calculation methods. The air temperatures obtained by the field measurement system was used to calculate and compare the FI. As a result, the freezing index calculated based on the $DAAT_4(T_4)$ is normally greater by 3% than the one on $DAAT_8(T_8)$. In addition, the calibration equation for the freezing index using air temperatures was proposed through the research.

• International Journal of Highway Engineering
• /
• v.11 no.4
• /
• pp.143-152
• /
• 2009

The purpose of this study is to evaluate the freezing index and frost penetration depth. The freezing index and frost penetration depth were analyzed using air temperature and temperature profile of pavement system in Korea LTPP-SPS(Long Term Pavement Performance-Specific Pavement Study) site. The predicted frost penetration depth were then compared with the measured one from the LTPP sites. And the trend of annual freezing index was analyzed using the temperature data of meteorological stations located in the vicinity of Korea LTPP-SPS site. The result showed that the freezing index was rapidly decreased since 1987, and it was known that the use of freezing index determined from the past 30 years temperature data could cause the over estimates in the pavement thickness design. The temperature profile measured at 3 sections of LTPP-SPS sites showed that the temperature of subbase layer was above $0^{\circ}C$, even though anti-frost layers were found in these sections. Comparing the measured and calculated frost depth, the frost depth calculated from the subgrade frost penetration permissible method showed a similar trend with the measured frost depth.

• International Journal of Highway Engineering
• /
• v.7 no.2 s.24
• /
• pp.87-95
• /
• 2005

To prevent the lowering of structural capability due to freezing and thawing in cold winter, numerous researches on frost heaving have been performed. As the result, the freezing index contour map of the Korea peninsula has been made for the design of the anti-freezing layer of pavements. However, the validity of the anti-freezing layer needs to be evaluated because systematic investigations on the variation of freezing depth with the thickness and material types of pavement layers and the configuration of the ground have been rarely performed. The freezing index of the Korea Highway Corporation test road site was calculated and the freezing depths of the concrete and asphalt pavements of the test road were investigated using the ambient and pavement temperature and water content. In addition, the investigated freezing depths were compared to the values estimated by existing freezing depth models. This is the preliminary study on the freezing-related data measured at the test road. The results with higher reliability will be produced by the long-term accumulation of the data and the analysis on it.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.129-135
• /
• 2013

Recently, waste water treatment system is developed in small and middle size to get more economic advantage. Freeze concentration system has high thermodynamic efficiency and low energy consumption, can re-use purified water and cold energy obtained from ice. This study was experimentally performed to investigate pollution containment in frozen layer by cooling wall temperature, air-bubble flow methods, initial ice-lining thickness of frozen layer in NaCl aqueous solution and the representative heavy metals, Pb and Cr aqueous solution. As the result, a decrease in the cooling wall temperature bring a higher growth rate of ice front and the more solute was involved in frozen layer. The method to inject directly air-bubble into ice-liquid interface through ring shape nozzle gave high purity of ice compared to indirect method. Ice lining in 5mm thickness resulted in frozen layer with higher purity than 1mm thickness.