• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.136-143
• /
• 1997

직경 비가 0.56인 이중동심관에 내외측모두 매끈한 벽면, 벽면 거칠기를 안측, 외측, 그리고 양측 모두의 4경우에 대한 난류 유동과 열전달특성을 실험과 이론으로 연구하였다. 시간평균속도분포, 마찰계수, 그리고 최대 속도 지점과 전단응력이 0인 지점들을 피토튜브와 X형 열선 풍속계로 측정하였다. 이중동심관내에서 4가지 경우에 따른 사각돌출형 거칠기효과가 난류 유동과 열전달에 미치는 영향을 수정난류모델을 기초로 하여 연구하였다. 직경비, 거칠기 위치, 레이놀즈수, 그리고 프란틀수 등의 여러 변수에 의해서 난류 유동과 열전달을 고찰하였다. 본 연구는 전체적 효율 측면에서 유리하게 열전달율을 향상시킬수 있는 거칠기 구조를 밝혔다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.1072-1080
• /
• 1994

The fully developed turbulent momentum and heat transfer induced by the square-ribed roughness elements on the outer wall surface in concentric annuli are studied analytically based on a modified turbulence model. The analytical results of the fluid flow are verified by experiment. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, Reynolds number, Nusselt number and Prandtl number. The study demonstrates that certain artificial roughness elements may be used to enhance heat transfer rates with advantages from the overall efficiency point of view.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.1
• /
• pp.41-50
• /
• 1994

동심 이중관내에서 외관내벽의 사각돌출형 조도요소에 의한 비대칭 난류유동과 열전달 특성을, 열전달과 마찰계수에 미치는 조도의 합성효과를 조사하기 위해, 연구하였다. 이론해석에서는 수정 플란틀 혼합길이(mixing length)이론의 난류모델을 속도분포와 마찰계수를 구하는데 사용하였다. 최대 속도지점에서 안쪽과 바깥쪽의 두 속도 형상들은 힘의 평형에 의해 일치시켰다. 그리고나서, 온도분포와 열전달 계수를 계산하였다. 속도형상과 마찰계수들의 해석결과는 반경비 (${\alpha}$)= 0.13, 0.26, 0.4, 그리고 0.56 경우의 실험과 매우 잘 일치하였다. 마찰계수와 Nusselt number에 미치는 반경비, 조도비, 그리고 조도에 대한 피치비 등과 같은 여러 변수들의 효과들을 조사하였다. 본 연구는 일정 조도 요소들이 전체적 효율 측면에서 볼 때 열전달을 우리하게 향상시킨다는 것을 증명하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.11
• /
• pp.612-615
• /
• 2002

The main advantages of Disk type Single-Phase Switched Reluctance Motor (DSPSRM) is the simple construction, rugged structure, low manufacturing cost and simple driving circuit. It is especially possible to make the short axial length of DSPSRM. Therefore, it is suitable to setup this motor in a narrow space. This paper presents the shape design to maximize the average torque of DSPSRM that is achieved by 3D Finite Element Method (3D FEM) considering the nonlinear of magnetic material. The characteristics of two different rotor shapes are compared. The design parameters, such as the rotor and stator pole arc, are selected to the parametric study. The effect of pole arc ratios on the torque performance is investigated. From these results, the optimal pole arc to produce the maximum torque is determined.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.28-28
• /
• 2023

Archidium ohioense Schimp. ex Müll. Hal.는 국내 자생 정보가 부족했던 종으로 본 연구를 통해 경기도 연천군 전곡읍 간파리 감악산에서 신분포지를 확인하였다. A. ohioense가 속하는 Archidium Brid. (Archidiaceae)는 극지방을 제외한 아열대지역에서 온대지역까지 분포하며, 총 36종이 생육하는 것으로 알려져 있고, 최근 anti-inflammatory와 antisickling potentials에 관한 효능 연구가 수행되고 있다. A. ohioense의 잎은 난상피침형~삼각상피침형으로 잎가장자리는 밋밋하나 잎끝에 미세한 치돌기가 있다. 잎맥은 굵고 1개이며 잎끝까지 또는 짧게 돌출되어 있다. 중앙세포는 마름모형, 긴 선형의 마름모형이고, 익부세포는 마름모형에서 직사각형이다. 추후 분자생물학적인 연구 및 생태학적인 연구가 추가된다면 안정적인 자원화에 기여할 수 있을 것이라 사료된다.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.85-88
• /
• 2009

Recently "DMB Video-Associated Stereoscopic Data Services" standard has been published by TTA. The standard enables DMB broadcasters to provide 3D or stereoscopic interactive data services based on MPEG-4 BIFS (Binary Format for Scenes). The purpose is to entice viewers to utilize DMB interactive data services more often by providing realistic and protrusive image objects overlaid on top of the main video in the background. This paper provides the background, technical analysis, and in-depth considerations for the standard. Also the results of standard verification are provided including the results of interoperability test with the existing terrestrial DMB receivers.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.488-496
• /
• 2010

Dens evaginatus is a tooth with cylindrical enamel projection which forms a nodule on occlusal surface. It could be explained as outward overgrowth of inner enamel epithelium or localized hyperplasia of pulpal mesenchymal tissue during tooth development. A problem is that it is likely to be worn out or fractured by mastication ensuing pulpal inflammation. It is occasionally found on the lingual surface of upper anterior teeth as well, called talon cusp. Dens invaginatus is a tooth with deep lingual pit made by invagination of lingual enamel epithelium during tooth development while it is considered normal in terms of size and shape. Radiographically, a part of cervical enamel shows inward growth forming cavity and it is reasonable to say that the base is possibly open to pulpal cavity since they are very close. Talon cusp and dens invaginatus are relatively common abnormality of shape. However it becomes the opposite if the two exist in the same tooth. Once the talon cusp is broken by occlusal force or fissure between cusps is decayed, the complicated structure of canals makes the pulpal treatment difficult. Preventive treatments such as occlusal equilibrium and sealant, and regular oral examination should be preceded and thorough understanding of canal shape, using radiography, is required when pulpal treatment is necessary. This report is about a 9- year-old boy(lower left central incisor), a 8-year-old girl(upper right central incisor), and a 7-year-old boy(upper right central incisor), who have dens invaginatus and talon cusp in the same teeth. The first and the second patients are under pulpal treatments, and the last one is being observed showing no pathologic impressions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.762-768
• /
• 2015

This study examined the integration value of a low level pilotis space, a component that has been often selected as an essential planning element of the recent high-rise apartment complex, and compared the main outdoor unit spaces with that of an average integration value of the individual complexes. Furthermore, this study provided the preliminary data for the next level of research, which is the observation of the pilotis space usage behaviors and the frequency of utilization. The results of this present research are as follows. First, from the main outdoor unit spaces of the high-rise apartment complexes including the pilotis space, a 'complex entrance' or a 'plaza' space showed the highest integration value. Second, the spatial integration value of a pilotis space in a high-rise apartment complex was generally lower that of the integration value of other main outdoor units. Third, from the pilotis spaces of the high-rise apartment complex, those with a 'projecting entry access + pilotis addition type' that did not provide an access to the individual units, had the lowest space utilization rate by the inhabitants; thus, had a high likelihood of the spaces becoming used for illegitimate activities or becoming vacant.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.1
• /
• pp.26-34
• /
• 1996

Copulation process, fertilization and gestation of the viviparous teleost surfperch, Ditrema temmincki were investigated by using photomicroscopy. Samples were collected from the vicinity of Suyoung Bay, Pusan, Korea from May 1992 to August 1993. During the copulation period, the copulatory organs were protruded at the base part of right and left soft ray of the anal fin in mature male. Secondary sexual characteristics index (SSCI) of male participated in copulation was above 3.5. Mature oocytes appeared only in the female containing sperms in the ovarian cavity. Transport of the spermatozoa into the ovarian cavity during copulation belonged to a spermatophore type. After copulation, spermatozoa remained in the ovarian cavity for about one month untill fertilization. Fertilization occured within the follicular cavity. Fertilized eggs were released into the ovarian cavity where they developed during gestation period. Developmental sequence of the female was as following: fertilization-ovulation-hatching-parturition. Right before parturition, the total length (TL) of the embryo was about 63.0 mm. When TL of maternal body was 20.0 cm, the mean numbers of the embryo were 18. The numbers of the embryo were positively related to the maternal body size.

• Journal of Genetic Medicine
• /
• v.8 no.1
• /
• pp.67-70
• /
• 2011

Constitutional trisomy 8 mosaicism (CT8M) is a relatively rare aneuploidy in humans with characteristic phenotypes including typical craniofacial feature (such as deformed skull, prominent forehead, low-set and/or dysplastic ears), skeletal malformation, cardiac anomaly, renal malformation, cryptochidism, varying degree of developemental delay. Due to the extremely variable phenotypic and cytogenetic expression, CT8M has gone undiagnosed in certain patients. We report a 28-year-old women with secondary amenorreha without characteristic CT8M phenotype. Chromosomal analysis showed a CT8M (47,XX,+8[9]/46,XX[41]).