• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.31-31
• /
• 2018

본 연구는 내수침수에 의한 침수면적 예측을 위하여 1차원 유출모형의 유출특성을 이용하여 침수면적 예측방법의 최적화이다. 2017년 강우의 초기강우와 첨두강우 특성을 적용한 경우에 정확한 침수면적 추정이 가능한 것을 확인한 바가 있다. 이러한, 결과에 추가적으로 SWMM 모형의 유출결과 자료의 특성인자를 이용하여 침수DB를 선택한 경우에 침수면적 예측 정확도를 분석하였다. 강우지속시간 및 강우량의 변화에 따른 유출결과의 변화를 분석하여 강우특성에 따른 SWMM 모형의 노드별 유출결과의 특성인자 변화를 분석하여 침수DB에서 실제 침수면적 선정방법을 정리하였다. 정리된 방법을 이용하여 유출결과 자료 특성인자를 이용한 최적의 침수DB 선정방법을 돌출하였다. 강우 특성 인자에서 침수DB를 선정하는 방법과 비교하여 강우유출모형의 모의결과를 이용한 경우에 약 6,000여개 노드를 기준으로 5~10분의 모의시간이 추가적으로 소요되어 실시간 침수 DB 선정에는 어렵지만, 준실시간 실제 유출량을 고려한 침수DB 선정이 가능할 것이다. 따라서, 강우특성 도출에 따라 1차적으로 침수DB를 선정하고, 강우유출모형의 유출 특성에 따라서 2차적으로 침수DB를 선정한다면, 예경보 시스템에서 대응시간 확보와 예측 정확도 유지에 긍정적인 방안으로 도입될 수 있을 것이다. 침수DB 구축은 많은 침수면적 산정연구에 이용하였던 TUFLOW 모형을 이용하여 침수DB를 구축하였다. SWMM 모형을 이용하여 강우유출을 모의하고, 침수면적을 TUFLOW를 이용하여 구축한 다양한 호우사상에 대한 침수DB를 이용하여 준실시간 침수면적 예측하는 방법은 향후, 예경보 시스템 구축에 이바지 할 수 있을 것입니다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.8 no.1
• /
• pp.21-29
• /
• 2006

When apples are picked or selected by grader, the rate of wound occurrence on the skin by apple stalk is remarkably high if the apple was bigger than 3 size during the harvest time. Except this case, the other sizes showed very little similarity. The crop of apple per 1 minute was 2.9kg without cutting fruit stalk, whereas only 1.1kg of the apples were obtained due to cutting the fruit stalk. Thereby, the harvesting without cutting fruit stalk is highly effective in terms of productivity rather than cutting the fruit stalk. As far as the wound occurrence rate on apple skin by apple stalk of distance between grader's dish and accumulated board is concerned, the grader which has no distance showed quite low rate of wound occurrence compared with those grader with 3cm or 8cm distance. When the apple was being stored, there was no difference in firmness between the cut stalk apple and the uncut stalked apple, however there was slightly more weight loss in the cut stalk apple than uncut stalk apple.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.250-250
• /
• 2022

호안은 유수로부터 제방과 하안을 보호하는 구조물로 태풍 또는 집중호우로 인한 홍수로부터의 안정성이 확보되어야 한다. 일반적으로 호안공법은 강성호안과 연성호안으로 구분되는데 호안재료로써의 기준과 설치 및 유지상태 기준에 따라 다르게 해석되고 있는 것이 현실이다. 최근에는 호안공법의 재료의 연결성에 따라 강성호안과 연성호안을 구분짓는다고 언급되기도 한다. 본 연구에서는 친환경 석재를 사용하고 재료와 기반재의 체결을 통해 연결성을 확보하고 굴요성을 갖게 하는 연성호안공법에 대해 실규모 실험을 계획하였다. 수리 안정성 검토를 위한 실규모 실험은 안동 하천실험센터에서 수행하였다. 실험에 사용된 수로는 8°의 경사를 갖는 급경사수로에서 수행하였으며, 수로의 제원은 폭 3m, 길이 30m 의 직사각형 형태의 직선수로로 이루어져 있다. 시험체는 실규모로 제작되며 실험수로 내 2m × 10m 의 제원을 갖는 공간에 제작된 호안공을 크레인을 이용하여 실험수로에 설치하였다. 수리 안정성 실험은 실험대상유량을 단계별로 나누어 점차적으로 증가시키고, 시험체의 이탈, 파괴 등의 큰 변화가 발생(미국 재료시험학회 연결형 콘크리트 블록 시험방법, ASTM D 7277)하였을 경우 실험을 종료하도록 계획하였다. 수리량 측정항목은 유속, 수위 등이 있으며, 호안공 의 물리적 변화는 3D스캐너를 이용하여 설치 전·후 변위를 검토하였다. 총 3회에 걸쳐 실험을 수행하였으며 실험조건에 따라 일부 시험체에서 돌출 또는 침하현상이 발생하기도 하였으나 호안의 손상이나 이탈, 연성기반재의 찢어짐 등 안정정을 저해하는 호안공 시험체의 변화는 발생하지 않는 것으로 확인되었다. 실험결과 실험수로에서 발생가능한 최대유량인 4.6cms 조건에서 본 호안공법은 약 337.7N/m² 의 소류력을 확보하는 것으로 확인되었다.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.855-864
• /
• 1998

The purposes of this study were to evaluate the cephalometric characteristics of Korean female patients with Class II division 2 malocclusion and to compare Korean females with Caucasian females who had same type of malocclusion. All of the samples had Class II division 2 malocclusion with deep overbite (more than 4mm) and full permanent dentition. These samples were divided into two groups according to the races: Group 1(N=16; Korean females; average age=18Y 2M) and Group 2 (N:20; Caucasian females; average age=14Y 2M). The pretreatment lateral cephalograms were measured, analyzed and compared by using 38 variables and independent t-test. And the results were as follows: 1. Although there were no differences in Overbite, SN to mandibular plane angle, Palatomandibular plane angle, and FMA between Group 1 and 2, the other vertical relation variables of maxilla and mandible (SN to palatal plane angle, SN to occlusal plane angle, ODI) of Group 1 showed more clockwise rotation tendency of occlusal plane and less hypodivergency tendency than those of Group 2. 2. There were no differences in mandibular body length and ramus height between Group 1 and 2 except small upper genial angle of Group 1. There was less counterclockwise rotation tendency of mandible in Group 1. 3. There were no statistical significant differences in UAFH/LAFH and PFH/AFH between Group 1 and 2. 4. Although there were no differences of overjet and anteroposterior position of mandible between Group 1 and 2, the position of maxilla of Group 1 was more retropositioned than that of Group 2. 5. Except the more protrusion of lower incisor to A-Pog of Group 1, there were no differences of inclination and distance of upper and lower incisors to basal plane between Group 1 and 2. 6. The distance from upper- first molar to palatal plane showed no difference between Group 1 and 2. But the distance from lower first molar to mandibular plane of Group 1 was greater than that of Group 2. So it may be partially related to the clockwise rotation of occlusal plane and the less counterclockwise rotation tendency of mandible of Group 1. 7. Group 1 had more protrusive upper and lower lips than Group 2.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.375-401
• /
• 1995

Cause of skeletal Class III malocclusion in growing patients can be classified into maxillary deficiency, mandibular overgrowth, and combination of the two. Use of Protraction Head Gear(P.H.G.) has been recommended for treatment of growing Class III malocclusion patients, for it results in forward & downward movement of maxilla and backward & downward rotation of mandible. Numerous animal experiments were performed and clinical study data have been reported ; nevertheless, studies on soft tissue profile change and comparison of treatment effects among the patients who had undergone treatment are considered to be somewhat insufficient. The author selected 93 patients, who had been diagnosed as skeletal Class III malocclusion with maxillary deficiency and then treated with P.H.G. ; the sample group was divided according to sex, treatment beginning age, palatal suture opening(intraoral appliance), and facial growth pattern. For each group, changing patterns of hard and soft tissue profile observed, and comparision with 20 normal group(Angle's Class I) patients of statistical significance in amount of growth and treatment of hard and soft tissue was done. The following results were obtained. 1. Skeletal, dental, and soft tissue measurements indicated that more growth changes was induced in the sample group that used P.H.G. compared to the growth amount of normal group. 2. No statistical significance was observed in the amounts of maxillary forward movement and mandibular backward & downward rotation depending on treatment beginning age in both sex group. 3. R.P.E. showed more significant maxillary forward movement and less protrusion of upper incisor than La-Li. 4. There was no statistical significance in the amount of maxillary forward movement depending on facial growth pattern. On the other hand, measurements indicating mandibular downward & backward rotation indicated greater change in counterclockwise growth pattern group than the clockwise. 5. Changes in upper and lower lip thicknesses showed a close relationship with positional changes in underlying bone tissue and upper and lower teeth, and upper lip height and nasolabial angle increased and mentolabial angle decreased.

• The korean journal of orthodontics
• /
• v.27 no.2
• /
• pp.181-196
• /
• 1997

The purpose of this study was to describe growth changes of soft tissue profile in koreans with normal occlusion and to get differences between male and female. The biennial serial cephalometric radiographs of 26 samples (15 males, 11 females) with normal occlusion from 8.5 years to 18.5 years of age were used in this study. The following results were obtained : 1. Both sexes had lower facial parts more protruded at 18.5 years of age than 8.5 years of age : in total facial convexity angle, male showed a decrease(P<0.01) and female showed no significant difference(P>0.05). 2. In the growth changes of soft tissue thickness, male outgrew female in the areas of nose and upper and lower lips, and female outgrew male in the pogonion area 3. In the growth changes of upper facial height and upper part of lower facial height, male's was higher than female's growth (P<0.05). 4. The ratio of the upper facial height over the lower facial height showed a decrease at 18.5 years of age than 8.5 years of age(P<0.01). The ratio of upper vs lower part of lower facial height and that of upper lip height vs lower lip height showed no significant difference(P>0.05). 5. Male showed a sustained change into older age compared with female in soft tissue profiles.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.37-46
• /
• 2004

In order to investigate the effect of floor condition on the fattening performance of cattle, sixteen finishing Hanwoo steers of weighting 570kg were fed for 16 weeks to slaughter on two types of sawdust bedding pen oriented to the south(SP) and the north(NP) then obtained following results. The floor condition of SP roofed by transparent material was dry and flat during overall experimental period, whereas, that of NP roofed by solid slate was muddy and rough even in summer and fall, and then frozen in winter period resulted in interfering with the locomotion and resting behavior of steers. Average daily dry matter intake of steers was not different between tow treatments, however, the average daily gain of steers in NP and SP was 0.64kg and 0.75kg, respectively, meaning that gained 14.3% less for the NP group(p<0.05), accordingly, feed requirement(feed/gain) and TDN/gain increased by 15.9% and 15.5%, respectively. No significant differences were found in slaughter weight, carcass weight, dressing percentage, meat yield index and meat quality traits between two treatments. In conclusion, this study revealed that poor floor condition of feeding pen could decrease weight gain and feed efficiency of cattle by increasing energy consumption for locomotion and conductive energy loss while resting on the floor surface. These results indicates that housing orientation of cattle shed and the selection of roof material are important factors in beef cattle production.

• Korean Journal of Microbiology
• /
• v.52 no.3
• /
• pp.260-268
• /
• 2016

The aim of this work was to investigate the cellular responses and proteomic analysis of Bacillus cereus MH-2 exposed to EGCG. Strain MH-2 was isolated from commercial Ssamjang and has the hemolytic activity. Survival of the MH-2 strain with time in the presence of different concentrations of EGCG under sublethal conditions was monitored. The amount of alginate from MH-2 strain decreased depending on the increasing concentrations of EGCG and increased depending on the exposure time at any particular EGCG concentration. Analysis of SDS-PAGE and Western blot using anti-DnaK and anti-GroEL revealed that two stress shock proteins, 70 kDa DnaK and 60 kDa GroEL were found to decrease in proportion to the EGCG concentration in exponentially growing cultures. Scanning electron microscopic analysis demonstrated the presence of protrusions and fused rod forms on the cells treated with EGCG. 2-DE of soluble protein fractions from MH-2 cultures showed 20 protein spots changed by EGCG exposure. These proteins involved in enterotoxins (hemolysin BL lytic component L1 and hemolysin BL-binding protein), chaperons (DnaK and GroEL), cell defense (peptidase M4 family proteins), and various biosynthesis and energy metabolism were identified by peptide mass fingerprinting using MALDI-TOF. These results provide clues for understanding the mechanism of EGCG-induced stress and cytotoxicity on B. cereus MH-2.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.59-68
• /
• 1999

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives and vowels. We propose that usability with visual distinguishing factor that using feature vector because as a result of recognition experiment for recognition parameter with the 10 korean vowels, obtaining high recognition rate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.8-16
• /
• 1998

Sexual maturation and reproductive cycle of the goldeye rockfish, Sebastes thompsoni were investigated under photomicroscopy. Samples were collected monthly in the coastal water of Samcheonpo ($34^{\circ}55'N$ ), Korea from November 1995 to October 1996, The ovary consists of several ovarian lamellae originated from ovarian outer membrane. Oogonia which are originated from the inner surface of the ovarian lamella protrude to the ovarian cavity in oocyte stage, and they ave suspended by the egg stalk. The testis is seminiferous tubule type in internal structure. Seminiferous tubule consists of many testicular cysts which contain numerous germ cells in same developmental stage. Biological minimum size of female and male were 19.5 cm and 21.5 cm in total length, respectively. Gonadosomatic index (GSI) of female was the highest (9.56) in March and the lowest (0.15) in August. GSI of male was the highest (0.25) in February and the lowest (0.04) in July. Reproductive cycle was classified into the following successive stages: in female, growing (October and November), maturation ( $December\~February$), gestation (March), parturition and recovery ($April\~June$) and resting ($July\~September$), and in male, growing ($September\~November$), maturation ( December and January), ripe and copulation ( February and March) and degeneration and resting ($April\~August$).