• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.729-741
• /
• 2012

Among the methods of precipitation data acquisition, a rain gauge station has a distinctive advantage of direct measurement of rainfall itself, but multiple stations should be installed in order to obtain areal precipitation data required for hydrological analysis. On the other hand, a rainfall radar may provide areal distribution of rainfall in real time though it is an indirect measurement of radar echoes on rain drops. Rainfall radars have been shown useful especially for forecasting short-term localized torrential storms that may cause catastrophic flash floods. CAPPI (Constant Altitude Plan Position Indicator), which is one of the several types of radar rainfall image data, has been provided on the Internet in real time by Korea Meteorological Administration (KMA). It is one of the most widely available rainfall data in Korea with fairly high level of confidence as it is produced with bias adjustment and quality control procedures by KMA. The objective of this study is to develop an improved way to extract quantitative rainfall data applicable to even very small watersheds from CAPPI using CIVCOM, which is a new image processing method based on a vector-based scheme proposed in this study rather than raster-based schemes proposed by other researchers. This study shows usefulness of CIVCOM through comparison of rainfall data produced by image processing methods including traditional raster-based schemes and a newly proposed vector-based one.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.191-200
• /
• 2009

A localized torrential rainfall and flash floods which are more frequently occurred by extraordinary atmospheric phenomena and rising sea surface temperature require more hydrological data collecting and analysis for small watershed. Urban watershed hydrological data monitoring system is needed because of big flood potential damage and lack of urban watershed hydrological data. Therefore, Urban Flood Disaster Management Research Center operates small experimental catchments(Sinnae1, Gunja, and Children's Park) observing and analyzing hydrological data(rainfall, stage, and discharge). In this study, the discharge of combined sewage for Gunja experimental drainage is analyzed with weekly data and day of the week data. Through several analyses in analyzing the urban runoff characteristics and managing the urban sewage system, direct runoff is calibrated and verified by the estimated values of rainfall-runoff model(SWMM).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.294-294
• /
• 2012

홍수위험도 추정에 있어서 불확실성은 수리, 수문, 구조, 환경 및 사회경제적인 불확실성과 관련 있으며, 수리 수문학적 불확실성은 주로 수리 수문학적 현상과 그 과정에 대한 불완전한 지식, 그리고 그 과정에 포함된 매개변수들에 대한 불완전한 지식과 관련이 있다. 이러한 여러 가지 불확실성은 홍수위험도 추정에 있어서의 불확실성에 중요한 요인으로 작용하므로 불확실성을 설명하기 위한 통계적 정보는 신뢰성 있는 홍수위험도 추정에 있어서 선행조건이라 할 수 있다. 이러한 불확실성 요인중 강우의 공간분포에 대한 신뢰성 있는 추정은 수자원 해석 및 설계에 있어서 필수적인 요소이다. 강우장의 공간변동성에 대한 고해상도 추정은 홍수, 특히 돌발홍수의 원인이 되는 국지성 호우의 확인 및 분석에 있어서 중요하다. 또한 강우의 공간 변동성에 대한 고려는 면적평균강우량 추정의 정확도를 향상시키는데 있어서 중요하며, 강우-유출모델의 모의결과에 대한 신뢰도를 향상시키는데 큰 영향을 미친다. 최근 공간자료에 대한 공간분포예측에 있어서 공간상관성을 고려할 수 있는 공간통계학적 기법의 적용이 증가하고 있으며, 이러한 공간통계학적 기법의 적용에 있어서 신뢰성 있는 모델 매개변수의 추정 및 불확실성 평가는 공간분포 예측결과에 대한 신뢰성을 향상시키는데 중요한 역할을 한다. 외국의 경우 공간분포예측 및 모의, 매개변수의 불확실성 평가 등과 관련하여 활발한 연구가 이루어지고 있는 반면 국내 수자원 분야에서는 아직까지 활발한 연구가 이루어지고 있지 않은 실정이다. 국내의 수문설계실무에서와 같이 확률홍수량을 강우빈도분석과 강우-유출모델을 이용하여 추정할 경우 확률홍수량 추정에 있어서 확률강우량 및 공간분포에 대한 불확실성과 강우-유출모델에서의 불확실성이 확률홍수량 추정에서의 불확실성에 영향을 미치며, 이후 연피해기대치 추정과 같은 홍수위험도 추정의 불확실성에도 영향을 미치게 된다. 따라서 본 연구에서는 강우공간분포의 불확실성을 고려한 홍수량 추정을 위하여 공간추계모의 기법인 CEM을 적용하여 강우공간분포의 불확실성을 정량화하고 강우-유출모델의 입력 강우량에 대한 확률분포를 추정하였다. 강우-유출해석의 경우 유효우량 및 홍수수문곡선 산정을 위하여 국내 수자원 실무에서 가장 많이 적용되고 있는 NRCS CN 기법, Clark 및 Muskingum 모델을 적용하였다. 이로부터 강우공간분포의 불확실성 추정, 소유역별 입력 강우량에 대한 확률분포의 추정 및 재현기간별 확률홍수량의 불확실성 정량화 방안을 제시하였다. 이러한 결과들은 풍수해저감대책, 유역종합치수대책 등 각종 수자원 계획 및 설계실무에서 확률홍수량 및 홍수 또는 재해위험도 추정의 신뢰성을 향상시킬 수 있는 방법론적 대안으로 활용될 수 있을 것으로 판단된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.163-170
• /
• 2011

Natural stream disasters due to a localized torrential and flash flood has occurring in a small stream especially un-implemented small stream. The survey results during ten years from 2001 to 2010 show that the small stream implementation projects (SSIPs) expenses is increasing with the damages is generally decreasing with variableness in which SSIPs is contributing to disaster prevention in a small stream. This study develop guideline for the selection of SSIPs to support high risk stream at first and save the small streams located on the mountainous area, prevention area and agricultural area which streams have no implementation effects. Developed sub items in guideline are evaluated by stream data collected from 212 small streams where it is proved that sub distance of each item are well arranged by normal distribution. This SSIPs is useful for selecting high risk small stream at first to maximize disaster risk reduction with minimum SSIPs expenses. Also, this SSIPs is used for leading to save small stream on the upstream to minimize flood damages on the down stream with selection a SSIP purchasing agricultural land for preparing flood plane.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.783-791
• /
• 2018

The biased estimation of low density rainfall network and radar rainfall has limited application to extreme rainfall in a small area. To improve this, more rainfall information needs to be produced. In this study, we analyzed the applicability of the vehicle rainfall sensor developed and used recently. The developed rainfall sensor was attached to the vehicle to observe the rainfall according to the movement of the vehicle. The analytical method used time series and average rainfall values for observations of rainfall sensors and nearby rainfall stations. The results show that the trend of observed values according to rainfall events shows a certain pattern. It is analyzed that it is caused by various causes such as the difference between the observation position of the rainfall sensor and the nearby rainfall station, the moving speed of the vehicle, and the rainfall observation method. This result shows the possibility of rainfall observation using a rainfall sensor for a vehicle, and it is possible to observe rainfall more precisely through experiments and improvement of rainfall sensors in various conditions in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.9
• /
• pp.5-14
• /
• 2024

In Korea, torrential rain frequency and intensity have surged over the past five years (2019-2023), breaking rainfall records. Due to insufficient observation facilities for rainfall and runoff data in small mountainous catchments, preparing for unexpected floods is challenging. This study examines the Bidogyo catchment in Goesan-gun, Chungcheongbuk-do, comparing design flood discharge calculated with optimized parameters versus standard guidelines. Using HEC-HMS and Q-GIS for model construction, five rainfall events were analyzed with data from the National Water Resources Management Information System. The time of concentration (Tc) and storage constant (K) were calculated using the Seokyeongdae formula and model optimization. Results showed that optimized parameters produced higher objective function values for flood events. The design flood discharge varied by -10.7% to 17.3% from the standard guidelines when using optimized parameters. Moreover, optimized parameters yielded flood discharges closer to observed values, highlighting limitations of the Seokyeongdae formula for all catchments. Further research aims to develop suitable parameter estimation methods for small mountainous catchments in Korea.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1827-1836
• /
• 2022

Disasters that occur unexpectedly are difficult to predict. In addition, the scale and damage are increasing compared to the past. Sometimes one disaster can develop into another disaster. Among the four stages of disaster management, search and rescue are carried out in the response stage when an emergency occurs. Therefore, personnel such as firefighters who are put into the scene are put in at a lot of risk. In this respect, in the initial response process at the disaster site, robots are a technology with high potential to reduce damage to human life and property. In addition, Light Detection And Ranging (LiDAR) can acquire a relatively wide range of 3D information using a laser. Due to its high accuracy and precision, it is a very useful sensor when considering the characteristics of a disaster site. Therefore, in this study, development and experiments were conducted so that the robot could perform real-time monitoring at the disaster site. Multi-sensor module was developed by combining LiDAR, Inertial Measurement Unit (IMU) sensor, and computing board. Then, this module was mounted on the robot, and a customized Simultaneous Localization and Mapping (SLAM) algorithm was developed. A method for stably mounting a multi-sensor module to a robot to maintain optimal accuracy at disaster sites was studied. And to check the performance of the module, SLAM was tested inside the disaster building, and various SLAM algorithms and distance comparisons were performed. As a result, PackSLAM developed in this study showed lower error compared to other algorithms, showing the possibility of application in disaster sites. In the future, in order to further enhance usability at disaster sites, various experiments will be conducted by establishing a rough terrain environment with many obstacles.