• Korean Journal of Food Science and Technology
• /
• v.18 no.5
• /
• pp.376-381
• /
• 1986

A hypothesis that Korean home-made fermented soybean products are brown-pigmented in large part by contaminated bacteria is proposed. Twenty six strains of bacteria forming brown pigments in the presence of L-tyrosine were isolated from home-made soybean paste. They were characterized and all were identified as strains of Bacillus subtilis. The isolates produced dark brown to brownish black pigmentation on yeast extract-peptone-glucose agar (YPGA) supplemented with 0.1% L-tyrosine in 72 hours but not on YPGA. They also caused different depress of lighter pigmentation on potato dextrose agar and nutrient agar. When an arbitrarily chosen pigmenting isolate was cultivated in a liquid medium supplemented with L-tyrosine, it began to produce pigments only after cell growth stopped. The tyrosinase enzyme was extracted and the enzyme activity was measured by using L-tyrosine and 3-hydroxytyrosine (L-dopa) as substrates. The crude enzyme preparation porduced pigments at rates of $2.1\;{\times}\;10^{-3}\;and\;5.0\;{\times}\;10^{-3}$ optical density units/min measured at 490㎚ for tyrosine and dopa, respectively. Possible content of L-tyrosine in a soybean paste formula was calculated.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.323-327
• /
• 2005

RT-PCR is an useful method to investigate the expression of target gene as detection tools. Although RT-PCR is the powerful detection method for tissues, it was difficult to amplify the target gene product using the single cell. To clarify the expression level of the genes related to Parkinson's disease (PD), I performed the laser dissection of single cell from Substantia nigra. I examined the mRNA expression level in the dopaminergic neuron isolated from the PD patients by the single cell RT-PCR method. It is known that tyrosine hydroxylase (TH), DOPA decarboxylase (DDC) are involved in biosynthesis of the catecholamine such as dopamine. Little has been known about the gene expression features of these enzymes in single dopaminergic neuron. I could detect the specific gene products in single cell level. The different expression was observed in PD-related gene products from the single neuron of PD patients. Interestingly, TH gene expression was significantly decreased with comparing the ratio of decrease in other PD-related genes. Hence, I represented data that indicate the RT-PCR method described in this report is an effective method in detecting a specific single-cell mRNA level related with diseases.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.87-103
• /
• 2008

In recent years, the field of THz photonics based on THz pulse technology has gained tremendous, world-wide interest as a new exciting research subject. With a possibility of many commercial applications as well as fundamental scientific achievements in the field, many advanced nations are stepping up their effort in advancing the field of THz photonics. This fact is supported by the observation of the significant increase in the number of papers on THz pulse technology presented in renowned international journals and conferences. The subject that is interesting for the THz application is the development of THz pulse sources and detectors, and other passive devices. In this paper, we present a brief review on some of the key devices and their relavant measurement techniques such as THz photoconductive antennas, optical rectification, difference frequency geneneration with quasi-phase matching structures, electro-optic sampling, high speed real time measurements, THz transmission lines, and other various waveguide structures.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.89-93
• /
• 2006

We investigate a method to improve the extinction ratio of directional couplers by controlling the angle of approach to their input ports and controlling the error limit for improving the extinction ratio of the directional coupler. Although relatively large angle of approach to the input port usually causes an error in calculations made by mode propagation analysis(MPA), optimally designed angle of approach not only minimizes errors in MPA calculations but also can improve extinction ratio by precision control of coupling coefficients of optical modes. We show that abrupt changes in approaching angle, although not enough to cause modal leakage, give rise to field-profile overshooting, which degrades extinction ratio and other properties of the directional coupler. Using Beam Propagation Method (BPM) we calculate two types of input structures, linear and curved, for optimization of extinction ratio.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.77-83
• /
• 2007

It is essential that second order nonlinear optical materials have low optical propagation losses in the wavelengths of second harmonic generation for practical applications in waveguides. Three dipolar chromophores substituted with nitro, cyano, and alkyl sulfone as an electron withdrawing group were prepared. The UV-Vis absorption spectra of the cyano and alkylsulfone chromophores showed a blue-shift compared to the nitro chromophore. The introduction of oxadiazole segment in the chromophore structure led to similar spectral shift. The blue-shift can produce low optical loses at second harmonics. The chromophores were successfully attached to a polyimide, yielding side chain polymers. The nonlinear optical property of the prepared optical polymers was determined by measuring electro-optic coefficient at 1.55 mm. The polymers exhibited high glass transition temperature of over $185^{\circ}C$ and thermal stability to $300^{\circ}C$ through differential scanning calorimeter analysis and thermal gravimetric analysis.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.469-474
• /
• 2004

We have fabricated and designed wavelength-tunable sampled grating distributed Bragg reflector laser diodes(SGDBR-LD) by using, for the first time, planar buried heterostructures(PBH). The diodes have low threshold current values and high-performance of laser operation. Growth condition using metal organic chemical vapor deposition(MOCVD) was optimized for the formation of a good butt-coupling at the interface. A maximum output power of the fabricated device was 20 mW under 200 mA continuous wave(CW) operation at $25^{\circ}C$. Average threshold current and voltage were 12 mA and 0.8 V, approximately. This output power is higher than those of ridge waveguide(RWG) and buried ridge stripe(BRS) structures by amounts of 9 mW and 13 mW, respectively. We obtained a tuning range of 44.4nm which is well matched with the target value of our design. The side mode suppression ratio of more than 35 dB was obtained for the whole tuning range. Optical output power variation was less than 5 dB, which is 4 dB smaller than that of RWG structures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.124-127
• /
• 2005

It is demonstrated that the annealing process for Ti in-diffusion to z-cut $LiNbO_3$ at temperature lower than the curie temperature in a platinum (Pt) box can cause a ferroelectric micro-domain inversion at the +z surface and Li out-diffusion, therefore which should be avoided or suppressed for waveguide type periodically poled lithium niobate (PPLN) devices. The depth of the inversion layer depends on the Ti-diffusion conditions such as temperature, atmosphere, the sealing method of $LiNbO_3$ in the Pt box and crystal orientation is experimentally examined. The result shows that the polarization-inverted domain boundary appears at the only +z surface and its thickness is about $1.6{\mu}m$. Also, for the etched $LiNbO_3$, surface the domain shape was observed by the optical microscope and atomic force microscopy (AEM), and distribution of the cation concentrations in the $LiNbO_3$ crystal by the secondary ion mass spectrometry (SIMS).

• Korean Journal of Optics and Photonics
• /
• v.24 no.4
• /
• pp.184-188
• /
• 2013

Two types of polymer-based optical splitters with $200{\mu}m$ large core are presented for optical multimode networks, such as smart home networks, intelligent automotive networks, etc. Optical splitters that have 1:1 symmetric and 9:1 asymmetric structure were fabricated by a ultra violet(UV)-imprint technology using a deep etched Si(silicon) master by the Bosch process. In this paper, we successfully fabricated the symmetric and asymmetric optical splitters with suitable optical network applications.

• Korean Journal of Optics and Photonics
• /
• v.18 no.3
• /
• pp.185-189
• /
• 2007

A novel technology for CWDM (Coarse Wavelength Division Multiplexer) utilizing a PLC (Planar Lightwave Circuit)-AWG (Arrayed Waveguide Grating) fabrication process is proposed. BPM (Beam Propagation Method) Simulation results on the employed parabolic-horn-type input slab waveguide of AWG and the performance of the 20 nm-channel spacing CWDM with flattened passband are presented. Waveguides of $0.75{\triangle}%$ have been used in this experiment and the insertion loss at the peak wavelength is 3.5 dB for a Gaussian spectrum and is 4.8 dB for a flat-top spectrum. The bandwidth at 3 dB is better than 10 nm and 13 nm for Gaussian and flat-top spectra, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6221-6226
• /
• 2015

In this paper, waveguide analysis was interpreted as an optical waveguide using the feedback perturbation method simple and easy to apply compared to the analysis method, while the other almost identical to the numerical calculation method. In addition, efficient coupling with an optical transmission line of optical fiber and the waveguide form the thin film of different functional elements is required in order to achieve the full optical communication system. However, problems arise, such as the light field (field) and the decrease of the access efficiency due to inconsistency in the distribution characteristics of the connection surface by the difference in size of the cross section thereof when connecting the optical fiber and the waveguide directly to the combination of a thin film. Therefore propose a new type of connector structure to increase the efficiency of the connection when connecting the optical fiber waveguide and the thin film was analyzed by applying a coupled mode theory, the binding efficiency of the modified contactor. And by diffusing Ti on the $LiNbO_3$ substrate and a wide range of applications in the manufacture of integrated optical material made of a current low-loss Ti: $LiNbO_3$ optical waveguide and making the Y-branch waveguide, and the properties were confirmed.