• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.197-198
• /
• 2008

지파도파관의 분산관계를 구하기 위해서는 마이크로파 발생장치의 발진구조 원리에 대한 정확한 분석이 필요하다. 이것은 파를 지연시키는 지파구조와 도파관을 이론적으로 분석 성가해야 하는데 이는 매우 어렵다. 본 연구에서는 이론과 실험을 병행하여 분석하였으며 이는 공진점을 측정하여 분산관계를 확인하는 방법을 통하여 톱니파형 도파관의 전자계특성을 평가하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.34-38
• /
• 2002

기존에 제안된 도파관 스위치의 경우, 도파관의 E-plane에 PBG 기판을 내장하게 되는데, 이 경우 PBG 기판의 저항값을 조절해주는 MEMS 스위치의 바이어스 라인에 대한 문제점이 발생한다 본 논문에서는 PBG 기판을 도파관의 H-plane에 놓음으로써 바이어스 라인을 RF로부터 쉽게 분리하고, 또한 단일 공진 주파수를 갖는 PBG의 경우에 제한된 기판의 길이로 인하여 bandwidth가 좁아지는 문제점을 서로 다른 공진 주파수를 갖는 PBG 기판의 연결을 통해서 bandwidth를 약 80%이상 증가시킬 수 있음을 보였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.198-201
• /
• 2001

L자형 루프를 이용하여 주파수대역이 6-18 GHz인 동축-이중릿지도파관 변환기를 상용 소프트웨어인 HFSS를 이용하여 설계한 후 제작하였다. L자형 루프는 동축-구형도파관 변환기에 이미 이용되고 있는 구조로써, 이를 동축-이중릿지도파관 변환기에 적용한 것이다. 제작 후 측정결과 대역폭이 6-18 GHz로 3:1 이상을 만족하며, 최대 삽입손실이 -1.52 dB 이었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2260-2266
• /
• 2009

In this paper, the problem of electromagnetic coupling between a slit fed by a flanged parallel-plate waveguide (FPPW) and a nearby conducting strip parallel to the slit is studied as a simplified problem for a near-field scanning microscopy (NSM). The characteristics of the FPPW are investigated from the results for the variations of the equivalent slit admittance, the reactive powers near the slit inside and outside the FPPW, the magnitude and phase of the voltage reflection coefficient of the TEM wave. The performance of the proposed apparatus as an NSM is tested by examining the effects of various geometrical parameters such as guide height, slit width, strip width, distance between slit and strip, and the ratio of slit width to guide height on the magnitude and phase of the voltage reflection coefficient of the TEM wave. From the results for the voltage reflection coefficient against the strip offset from the slit, it is found that a slit in the FPPW with smaller guide height gives higher scanning resolution and the phase variation is more sensitive than the magnitude variation.

• Journal of Internet Computing and Services
• /
• v.24 no.2
• /
• pp.27-36
• /
• 2023

Waveguides are transmission lines that guide electromagnetic waves in the desired direction and are utilized in various fields such as medical devices, radar systems, and satellite communications. Computational electromagnetics (CEM) is essential for designing and optimizing waveguides. The finite element method (FEM), which is one of the numerical analysis techniques, is efficient in solving closed problems such as waveguides. In order to apply FEM for waveguide analysis, boundary conditions that truncate the computational domain are required. This paper performs electromagnetic simulations using absorbing boundary conditions (ABC) and waveguide port boundary conditions (WPBC) in 2/D and 3/D waveguides using the finite element method and compared their performances. The accuracy of the analysis was verified by comparing the results with HFSS, a representative commercial electromagnetic simulation software. Simulation results confirm that applying WPBC allows for smaller analysis domains than ABC.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.131-136
• /
• 1997

In this paper, the input impedance of coaxial fed rectangular microstrip patch antenna located inside rectangular waveguide is calculated by using the cavity model and the mode excited in the waveguide by the patch antenna. The return loss and efficiency of the patch antennas as a function of feed position in. free space and in waveguide are calculated and compared. The maximum efficiency of the antennas in waveguide and in free space are obtained at different feed position.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.680-686
• /
• 2003

Digital waveguide model is a general method that is used in physical modeling of musical instruments. Wave motion is analyzed by time or by space in digital waveguide model. Because sampling is made via time, it is general that musical instrument model is described by wave motion of time. In this paper, we synthesized the musical instrument sound by adding instrument body model to the spatial based string model. In this way, we could improve sound quality and process musical instrument model's tone control variables effectively. We explained about delay error that happens in string and body in space based sampling and showed method to process fractional delay using FD (Fractional Delay)filter. Finally, we explained the relation between tone quality and number of delays. And we also compared the result with time base digital waveguide model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4A
• /
• pp.256-266
• /
• 2003

In this paper, scattering characteristics of the rectangular waveguide with elliptical conducting post and equivalent impedance of post are analyzed by mode matching method and generalized scattering method. The scattcring characteristics of rectangular waveguide are varied by the height and eccentricity of elliptical conducting post. When the height of post(2.54mm, 4mm) is small, variation in scattering characteristics appears in total simulated frequency. But as the height of post(7.62mm, 9mm) is increased, it is dominant in higher frequency. The simulated result shows good agreement with the HFSS's result. Proposed structure and analysis method are easily applied to the design and manufacture of waveguide component with elliptical conducting post.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1198-1206
• /
• 2003

In this paper, a MMIC waveguide mixer module based upon the novel suggested mode converter for wave-guide-to-microstrip transition was fabricated and measured. The insertion and return losses of the mode converter was optimized by compensating the discontinuity effect between ridge and microstrip with the modification of 50 $\Omega$ microstrip line pattern. Due to the low loss nature of the mode converter, a millimeter wave MMIC mixer chip can be successfully applied as a waveguide module for mmW waveguide communication system. The measured results of the module showed the successful MMIC chip application in waveguide and the negligible degradation of the supplied chip specification.