• Applied Biological Chemistry
• /
• v.36 no.6
• /
• pp.456-462
• /
• 1993

Parboiling, a popular technology used to protect rice from nutrient loss during milling and to increase the shelf-life of rice, was applied to barley kernels, and its effect on nutrient retention and chemical composition was evaluated. Before 36 days after ear emergence, barley kernels showed water content higher than 40%, and parboiling without presoaking resulted in at least 43% of gelatinization degree. This implies that soaking, an important step of parboiling, is dispensable for barley at milky stage. Parboiling did make little change in the appearance of the kernel after 31 days from ear emergence. Nonreducing sugars such as sucrose and raffinose remained unchanged while reducing sugars of barley was decreased by parboiling, with exception that maltose increased. Pearling led to decrease in crude protein, fat, fiber and minerals of barley sampled and parboiled on 36th day from ear emergence. Free sugars in the parboiled barley also was reduced with increasing pearling rate. Vitamin $B_1$ content of the parboiled barley was $260\;{\mu}g\;per\;100\;g$ as dry basis at 50% pearling rate, compared to $36\;{\mu}g$ for raw barley at same pearling rate. Thus parboiling appeared to be very effective in the retention of vitamin $B_1$ during pearling.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.57-71
• /
• 1983

마찰식 정미기의 성능에 영향을 미치는 기계설계 및 작동상의 인자로는 스크린의 형태, 롤러의 형태, 롤러회전속도, 출구 저항 등 여러가지가 있다. 이러한 요인들에 대한 연구가 본 논문의 저자에 의해서 시리즈로 연구되어 왔으며, 본 연구는 그의 일환으로 스크린의 단면형상(6각, 8각, 12각 그리고 원통형), 스크린에 뚫려있는 슬랏의 기울기($15^{\circ}$, $30^{\circ}$, $45^{\circ}$ 그리고 $-45^{\circ}$), 그리고 출구 저항이 정백미의 질과 양, 정백효율 그리고 정백실내의 정백압력 등에 미치는 영향을 규명하기 위해 수행되었다. 이 실험에 사용된 공시 정미기는 임도정 공장에서 널리 사용되고 있는 흡입마찰식이었며, 사용된 시료는 밀양 23호인 통일계품종이었다. 각 처리마다 동력 소모량과 정백실내의 정백압력을 측정하기 위해서 "KYOWA" 스트레인 게이지 시스템(strain gauge system), 토오크 변환기, 압력변환기 등이 사용되었다. 본 실험 결과를 요약하면 다음과 같다. 1) 정백과정중에 정백실내의 정백압력은 입구에서 가장 높았고 출구쪽으로 갈수록 점차 감소하였다. 평균 정백압력도 순환 횟수에 따라서 변화 하였는데 첫번째 순환에서 가장 높았고 순환횟수가 증가함에 따라 감소하였다. 2) 본 실험에서 사용한 출구저항 수준은 출구저항 수준 1에서 요구되는 정백도의 백미를 얻기 위한 순환 횟수는 2회 이었고 출구저항 수준 2에서는 4회 이었는데, 이를 출구저항 수준이 정백압력, 정백율, 완전미수율 및 도정 효율에 가장 큰 영향을 주었다. 3) 스크린에 뚫려있는 슬랏 각도가 $15^{\circ}$에서 $45^{\circ}$로 증가함에 따라서 정백실내의 평균 정백압력은 감소하였고, 완전미수율과 도정 효율은 증가하였으나, 일반적으로 도정수율은 감소하는 경향을 보였다. $-45^{\circ}$의 슬랏 각도를 가진 스크린에서는 슬랏 각도 $15^{\circ}$인 스크린에서와 거의 비슷한 정백압력 수준을 나타냈으나 완전미와 정백미의 생산은 매우 낮았다. 4) 스크린 표면에 기다란 강편 (보통 "띠"라고 부름)을 붙인 원통과 12각형의 스크린에서는 강편을 붙이지 않은 6각형과 8각형 스크린에서 보다는 비교적 높은 정백압력을 나타냈다. 전자는 후자에 비해서 정백효율은 높았으나 완전미수율은 떨어졌다. 5) 정백실내에서 가장 낮은 정백압력을 나타낸 8각형 스크린은 높은 도정수율과 완전미수율을 가져왔으나 상대적으로 정백효율은 낮게 나타났다. 6) 정백실내의 반경 방향의 평균 정백압력($P_R$)과 완전미수율($Y_h$)은 다음과 같은 1차적인 역비례 관계가 있었으며(평균 정백압력 범위는 0.5-0.9kg/$cm^2$), $Y_h=-28.661P_R+84.860$ ($r^2=0.858$) 정백효율($Y_e$)과 정백압력($P_R$) 사이에는 다음과 같은 2차적인 관계가 존재함을 알 수 있었다. $Y_e=-597.5P_{R^2}+929.96P_R-210.15$ ($r^2=0.759$) 정백효율은 정백압력이 0.7-0.8kg/$cm^2$일 때 가장 높았으며, 이때 변이도 가장 심한 것으로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.10 no.2
• /
• pp.109-111
• /
• 1978

Three kinds of domestic summer grains, barley, naked-barley & wheat were used for the assessment of ash, protein, fat, crude fiber, calcium, iron & thiamine contents in the grain-pearling and flour-milling processes at the 60%, 70%, 80%, 90% yield bases and the following results were obtained. 1) Ash, protein, fat, crude fiber, calcium, iron & thiamine contents of milled grains were proportional to the milling yield in grain-pearling and flour-milling processes. 2) In the case of pearled barley, the average content of ash was 0.83%, protein was 1.31%, fat was 0.40%, crude fiber was 0.75%, calcium was 3.03mg%, iron was 2.40mg% and thiamine was 0.14% lower than the barley flour at the same level of milling yield. 3) In the case of pearled naked-barley, the average content of ash was 0.41%, protein was 1.96%, fat was is 0.33%, crude fiber was 0.84%, calcium was 4.54mg%, iron was 1.19mg% and thiamine was 0.10mg% lower than the naked-barley flour at the same level of milling yield. 4) In the case of pearled wheat, the average content of ash was 0.28%, protein was 2.25%, fat was 0.05%, crude fiber was 0.25%, calcium was 4.31mg%, iron was 0.12mg% and thiamine was 0.15mg% higher than the wheat flour at the same level of milling yield.

• Journal of Biosystems Engineering
• /
• v.7 no.1
• /
• pp.62-72
• /
• 1982

이 연구(硏究)는 정백과세중(精白過稅中)에 발생(發生)하는 도정산물(搗精産物) 즉, 정백미(精白米), 미당(米糖), 쇠미등(碎米等)의 발생(發生)을 조사(調査)함으로써 현미(玄米)의 정백(精白)이 진행(進行)되는 과정(過程)을 밝히고자 함이다. 본(本) 실험(實驗)에서는 분풍마찰식(噴風摩擦式) 정미기(精米機)를 사용(使用)하였으며, 정미기(精米機)의 롤러 회전속도(回轉速度)를 850rpm으로 고정(固定)하고 출구저항(出口抵抗)은 3가지 수준(水準)으로 변화(變化)시켰다. 한편 이 실험(實驗)에 사용(使用)된 벼는 밀양 23호(號)로써 전형적인 통일계품종(品種)의 일종(一種)이다. 매순환(每循環)마다 생산(生産)되는 정백미(精白米) 및 부산물(副産物)로부터 sample를 채취(採取)하여 미당(米糖), 대소쇄미(大小碎米), 완전미(完全米) 및 도정수율(搗精收率)을 분석(分析)하였다. 실험결과(實驗結果)를 요약(要約)하면 다음과 같다. 1) 전체당층(全體糖層)의 75%가 2번째 순환이내(循環以內)에서 제거(除去)되었다. 당층제거율(糖層除去率)은 출구저항(出口抵抗)에 크게 영향(影響)을 받으며, 높은 출구저항(出口抵抗)에서 높은 당층제거율(糖層除去率)을 보였다. 2) 대쇄미(大碎米)의 발생(發生)은 대부분 정백과정(精白過程) 초기단계(初期段階)에서 이루어 졌으며, 완전미(完全米)로 부터의 새로운 쇄미발생(碎米發生)은 순환(循環)이 반복(反復)됨에 따라서 급격(急激)히 감소(減少)하였다. 출구저항(出口抵抗)과의 관계(關係)는 출구저항(出口抵抗)이 증가(增加)할수록 대쇄미(大碎米)의 발생(發生)도 증가(增加)하였다. 3) 미당집적기(米糖集積器)로부터 채취(採取)한 sample에서 측정(測定)한 소쇄미(小碎米)는 양적(量的)으로 다른 도정산물(搗精産物)에 비(比)해 적은 편이었다. 8%의 미당(米糖)이 제거(除去)된 후(後) 소쇄미(小碎米)는 현미중량(玄米重量)의 0.6% 이하(以下)로 나타났다. 4) 도정수율(搗精收率)과 완전미수율(完全未收率)은 어느 정도 출구저항(出口抵抗)의 영향(影響)을 받는 것으로 나타났다. 출구저항(出口抵抗)이 증가(增加)함에 따라서 특히 완전미수율(完全未收率)은 감소(減少)하는 경향(傾向)을 나타냈기 때문에 백미(白米)의 질적저하(質的低下)를 막기 위해 높은 출구저항(出口抵抗)(본(本) 실험결과(實驗結果)에 의(依)하면 85g/$cm^2$)을 사용(使用)하는 것은 부적당(不適當)한 것으로 사려(思慮)된다. 5) 백도계(百度計)의 측정치(測定値)와 미당제거정도(米糖除去程度)(정백도(精白度)) 사이에는 고도(高度)의 상관관계(相關關係)가 있었다. 그러므로 "KETT"제(製) 백도계(百度計)는 정백미(精白米)의 정백도(精白度)를 판명(判明)하는데 사리(使利)하게 사용(使用)될 수 있다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.400-403
• /
• 1988

This study was conducted to evaluate the polishing process that affects the polishing properties and cooking qualities of cut-polished barley. Naked barley, Youngsanbori (Sedohadaka), which was produced in Cheonnam province, Korea in 1981, was cut and polished to have the polished yield per cent of four grades, 68.27, 72.85, 75.51 and 78.70, in contrast to the conventionally polished barley which was polished up to 70.10 per cent. Length. thickness and width of the kernels and weight of 1,000 kernels of the cut-polished barley were increased with improving the grade of the polishing yield. Energy consumption was found to be reduced according to increasing the polishing yield of the cut-polished barley. As polishing yield of the cut-polished barley were increased. the contents of P$_2$O$\_$5/, K$_2$O, MgO and Mn were increased. Also whiteness, water uptake and expanding volume of cooked barley were increased in accordance with upgrading the polishing yield of the cut-polished barley.

• Current Research on Agriculture and Life Sciences
• /
• v.32 no.2
• /
• pp.91-97
• /
• 2014

In order to analyze the structural factors and milling performance of farmhouse rice milling machines in Korea, this study classified 29 models of the farmhouse rice milling machines sold in Korea into hulling and polishing devices, examined the structural features for each device, and then analyzed the performance factors based on the results. With regard to hulling devices, impeller rotational speed was investigated as a major structural factor. The hulling devices at an impeller rotational speed of 4,800 rpm were most frequently used and accounted for the largest proportion, 65.5%. At this rotational speed, the hulling rate was the highest, 99.45%, and the brown rice cracked rate was the lowest. Thus, the best impeller rotational speed for the hulling performance was analyzed as 4,800 rpm (p<0.05). With regard to polishing devices, rotor speed was investigated as a major structural factor. The polishing devices with a rotor linear velocity of 2 m/s were most commonly used and accounted for the largest proportion, 60.1%. At this linear velocity, the hulling rate was the highest with 75.07%, and the dispassion rate and broken rice rate were the lowest with 0.02 and 7.06%, respectively. Thus, the best rotor linear velocity for the polishing performance was analyzed as 2 m/s (p<0.05).

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.04a
• /
• pp.102-103
• /
• 2005

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.128-129
• /
• 2004

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.199-205
• /
• 1990

With a view to improving the method of rice marketing quality estimation, vaietal milling characteristics and apparent qualities were studied and their statistical interrelationships were computed for 2 years crops, using 22 varieties of Japonica type and Japonica x Indica type (Tongil). The milling yield was the highest for Japonica, while the broken rice yields was the highest for Japa.xInd. type. But bran yield did not show any significant differences among rice types. Milling factors were volume weight of brown rice, dehulling yield, and Polishing yields; the better these factors, the higher the yield. High apparent quality milled rice with high milling yield were produced from rice types whose broken rice, chalked rice, husk yield and bran yield were little and/or low.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.183-189
• /
• 2010

This study assess the effects of reclaimed wastewater irrigation on grain quality-related properties of milled rice. To conduct the effects of wastewater reuse on rice quality, the contents of amylose, protein, and milled head rice recovery were analyzed. The water and the soil quality were monitored, and the grain characteristic was analyzed using a NIRS (Near Infra-Red Spectroscopy). The value of the grain properties of the rice which was cultivated with the reclaimed wastewater didn't show a big difference from other common rice. The significant difference by each processing distinction was shown at the significance level of 5% in the statistical result.