Currently, fluid transfer steel pipes take a lot of time and expense to maintain all facilities due to new construction and painting or corrosion and aging. Therefore, this study was conducted for designing a CFRP pipe structure with high corrosion resistance and chemical resistance as a substitute for steel pipes. The helical/hoop pattern was cross-laminated to improve durability, and HNT was added to suppress the moisture absorption phenomenon of the epoxy. The HNT/CFRP pipe was manufactured by a filament winding process, and performed a mechanical property test, and a moisture absorption test in distilled water at 70℃. As a result, the highest bending strength was obtained when the hoop pattern was laminated with a thickness equivalent to 0.6% of the pipe. The 0.5 wt% HNT specimen had the highest moisture absorption resistance. Also, the delamination phenomenon at the interlayer interface was delayed, resulting in the lowest strength reduction rate.
The objective of this study was to evaluate the applicability of high temperature drying to pitch pine (Pinus rigida) lumber, especially intended for use as lamina of structural glued laminated timber (glulam), to enhance the efficient utilization and provide added-value to that species. The high temperature schedule and drying procedures utilized were shown to be reasonable for drying glulam lamina due to the occurrence of small moisture gradients, minimal residual drying stress, and low warpage. Through preliminary tests, it was confirmed that residual resin at lamina surfaces did not adversely affect the gluing process. However, quantitative analysis of resin is required for developing a method to constrain the occurrence of pitch trouble with respect to decreasing long-term adhesive and finish durability of glulam in use after manufacturing. The final moisture content of high temperature dried lamina was much lower than target moisture content and discoloration was more severe than anticipated. In a further study, it will be necessary to determine the optimal drying conditions, such as temperature, humidity, drying time, and top load restraint level, which could best control discoloration, warpage, and moisture content of the lamina, while minimizing fuel expense.
This study references preceding studies to examine the history of paint application techniques using various paints in the past, with the aim to contribute to the long-term preservation of large military cultural heritage assets situated outdoors. To this end, the study compared the findings of preceding research with the findings of an analysis conducted on a H-13 helicopter housed at the War Memorial of Korea. Upon collecting and analyzing samples from three grounded WWII aircraft from above-ground by preceding studies, it was confirmed from each sample that the various chemical properties of chrome ensured the effectiveness of the protective coating. The compound was first tested as a corrosion-inhibiting pigment in the early 1940s and proved its excellent moisture-resistant properties over the course of 80 years, despite the deterioration of the paint layer and long-term exposure to the natural environment. For this reason, it has been widely used as a corrosion inhibitor for aluminum alloys in the aviation industry. In other word, the most widely-used material for preventing corrosion was an organic primer containing chromate. In this study, based on the paint analysis of a H-13 helicopter operated in the Korean War, it was shown that the second layer, consisting of the primer, contains chromium oxide (Cr2O3). In addition, it was estimated that red lead tetraoxide (Pb3O4) was used for the vehicle. Analysis results and data from previous studies can help to confirm the continued effectiveness of corrosion prevention function provided by chromate. Meanwhile, the result of infrared spectroscopy analysis confirmed the use of alkyd resin. In the future, comparisons with a more diverse range of artifacts will allow the identification of changes in the manufacturing technology of paints used to protect alloys from corrosion.
This study was carried out to determine the effect of raising seedling at Hallasan area of sub-alpine (altitude of 600m above sea level) to improve fruiting.ate of Squash (Cucurbita maxima) in retarding culture. 'Ebis' cultivar was seeded in plug tray of 32 cells and the seedlings were grown for 25 days. They were transplanted on August 26, 2004, following L-stem training method under rain-shielding condition. Seedling height, number of nodes and leaf area were higher in lowland than in sub-alpine area. T/R ratio of seedling in sub-alpine was much lower as compared with that in the lowland. The first fruiting was on the 19th node in sub-alpine area, and on the 26th node in the lowland area(control). The succeeding fruiting nodes were lower by 3 to 5 node than those of control. Fruiting rate of second flower was improved by 17.2% compared with the 1.4% in control. The marketable yield was increased by 27% by raising seedling in sub-alpine area (4,460 kg/10a). This also brought out 20% labour saving effect. The environmental condition for raising seedling in the sub-alpine area of Hallasan was effective for the improvement of Squash (Cucurbita maxima) fruiting rate compared with lowland area.
The chemical properties of oak tree wood vinegar and the effect of wood vinegar on the tomato seedling were investigated to apply wood vinegar efficiently to the organic - and natural farming system. On the basis of the results from chemical properties of the oak tree wood vinegar, mineral nutrient contents of wood vinegar was low. Therefore, wood vinegar could not be a suitable nutrient source for the plant growth at 500∼1000 times dilution level. which commonly used in the farming, if only wood vinegar is supplied for the nutrient source for the plant growth. The application of wood vinegar increased root growth up the 500 times dilution level while decreased shoot growth. Furthermore. the anion concentrations such as nitrate and phosphate of the plant were decreased by the application of wood vinegar while cation concentrations such as K. Ca. and Mg were increased. Phenolic compounds of wood vinegar such as chlorogenic acid and ferulic acid enhanced the root growth. Interestingly the application of ferulic acid increased both root and shoot growth at the level of 10$^{-4}$ M concentration. It indicated that the effect of wood vinegar on the production of healthy plant seedling may be due to the beneficial root growth by phenolic compounds such as chlorogenic acid and/or ferulic acid of the wood vinegar. However. the effect of the wood vinegar on the plant growth could be influenced by synergism or antagonism of different phenolic compounds in wood vinegar used. In addition. drench in the soil of wood vinegar may be more beneficial compared to foliar application for the improvement of root activity and plant growth.
Kim, Dae-Young;Kim, Tae-Il;Kim, Woon-Seop;Kang, Yun-Im;Yun, Hyung-Kweon;Choi, Jong-Myung;Yoon, Moo-Kyung
Journal of Bio-Environment Control
/
v.20
no.4
/
pp.283-289
/
2011
This study was conducted to examine the effects of defoliation treatment on the growth and yield of strawberry ($Fragaria{\times}ananassa$ cv. Maehyang and Seolhyang) during nursery period. Leaves of strawberry plantlet had been removed except two, three and four fully expanded leaves until planting date. As the intensity of defoliation was strong, the petiole length was reduced and overgrowth of strawberry plantlet was suppressed. Outer diameter of crown in defoliation treatments significantly decreased but inner diameter of crown was not significant. Number of primary roots of the 3 leaves or 4 leaves defoliation treatment generally tended to increase, but there was not significantly different among treatments. Fresh weight and leaf area in the defoliation treatments significantly decreased and the root weight were higher in partial 3 leaves or 4 leaves defoliation treatment but was not significantly different among treatments. Because T/R ratio decreased significantly as growth inhibition of above-ground part compared to underground part, it is considered easy to take rooting after plantlet plating. As the intensity of defoliation was strong, chlorophyll contents tended to decrease significantly. Reduction of the endogenous nitrogen by defoliation effectively led to promote floral differentiation at low temperature and short day condition. This promoted timing of budding and flowering and also induced uniform flowering after plantlet planting. Marketable fruit yield of 3 leaves defoliation treatment tended to be higher than the control.
Soo Ho Yeon;Sang In Lee;Mi Jin Jeong;Ju Sung Cho;Cheol Hee Lee
Proceedings of the Plant Resources Society of Korea Conference
/
2020.08a
/
pp.23-23
/
2020
털부처꽃(Lythrum salicaria L.)은 예로부터 발효해서 술로 마시고, 잎은 채소로 식용하며, 식중독 치료 및 설사를 멈추게 하는 효과가 있는 것으로 알려져 있다. 한국, 중국, 아프리카, 유럽, 북아메리카 등의 습한 지역에 분포하며, 7~8월에 취산꽃차례로 붉은 자주색의 꽃이 핀다. 본 연구는 털부처꽃을 지피용 소재로 개발하기 위한 최적의 재배기술을 확립하기 위해 수행되었다. 재배방법의 확립을 위하여 2019년 4월 27일에 파종하여 생산된 유묘를 7월 4일에 정식하여 9월 24일까지 12주 동안 재배하였다. 공통 조건은 3치 비닐 포트에 원예상토를 충진하고, 200구 트레이에 셀당 1립씩 파종하여 생산된 1셀 묘를 정식하였으며, 추비, 차광, 적심 등은 처리하지 않았다. 추비 실험은 hyponex 하이그레이드(N-P-K, 7-10-6)를 0, 500, 1000, 2000mg·L-1를 4주간 간격으로 총 3회 엽면시비 하였다. 차광 정도 실험은 0, 35, 55, 75% 차광막을 이용하였으며, 적심은 무적심과 4주차에 1회 적심처리 하였다. 연구의 결과, 털부처꽃은 추비 농도가 증가할수록, 생육이 감소하는 결과를 보였다. 차광처리 별로는 무차광 조건에서 생육이 가장 왕성한 결과를 보였고, 광량의 부족은 전반적으로 생육을 억제하는 경향이었다. 적심 처리는 줄기 신장을 크게 억제하였으며, 측지수를 증가시키는 결과를 보였다. 엽수는 무처리와 비교하였을 때 유의적인 차이가 없는 것으로 확인되었다. 따라서 털부처꽃은 적심을 하는 것이 효과적인 것을 알 수 있었으며, 적심 시기에 관한 추가적인 연구가 필요할 것으로 생각된다. 결론적으로 추비처리는 털부처꽃의 생육에 부정적인 영향을 주므로 처리하지 않고, 무차광 조건에서 재배하는 것이 전반적인 생육에 유리하였다. 또한 도장이 잘되는 식물임으로 적심처리하는 것이 좋을 것으로 판단된다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.9
/
pp.206-211
/
2016
Various applications require dry air at low temperature, such automation equipment, semiconductor manufacturing, chemical production lines, and coating processes for the shipbuilding industry. Four evaporators for low temperature (below $0^{\circ}C$) were installed for a dehumidification system. Moist air is cooled sequentially over three evaporators. The first evaporator has an evaporation temperature of $13^{\circ}C$, that of the second evaporator is $5^{\circ}C$, and that of the third evaporator is maintained at $-1.3^{\circ}C$. In the fourth evaporator implantation thereby the moisture contained in the moisture air. A pressure regulator (CPCE 12) is used at this point and is defrosted when the vapor pressure is below a set value. The non-implantation moisture of the air is a heating system that uses the waste heat of a condenser with high temperature. It develops the cooling type's dehumidifier, which is important equipment that prevents the destruction of protein and measures the temperature and humidity at each interval by changing the front air velocity from 1.0 m/s to 4.0 m/s. The cooling capacity was also calculated. The greatest cooling capacity was 1.77 kcal/h for a front air velocity of 2.0 m/s
Journal of Practical Agriculture & Fisheries Research
/
v.13
no.1
/
pp.71-82
/
2011
This study was conducted to investigate the effect of stem node number, pinching time and growth retardants on the growth of Coreopsis spp. and Dianthus spp. Thy day of seedings are not passed period of 4 weeks after seedlings in the Cutting number and the days seedlings of joint experiments of Coreopsis spp. 2 node ranches treatment of Coreopsis spp. are reasonable valuable as ornamental pot product. Pinching time of Coreopsis spp. was more effectiveis on lateral and growth inhibition in the two times pinching treatment. It is observed that plant growth inhibitors was affected the growth of Coreopsis spp. It is observed that B-9 treatment is the effective plants growth and differentiation, especially the 2 times treatment with 4,000 ppm was the most effective. On the other hand, CCC treatment showed significant differences. B-9 treatment of Coreopsis spp was more effectived than the other treatment. Pinching and plant growth inhibitors of Dianthus spp. was not good the growth and plant height. Compared with B-9 4,000 ppm 2 times and control increased leaves extremely. it confirmed that the things are positively affective.
Kim, Ho Cheol;Cho, Yun Hee;Ku, Yang Gyu;Hwang, Seung Jae;Bae, Jong Hyang
Horticultural Science & Technology
/
v.34
no.2
/
pp.249-256
/
2016
This study was performed to investigate the effect of various concentrations of Diniconazole (DC) on the growth and quality of grafted tomato (Solanum lycopersicum) seedlings cultivated during the summer season. Concentrations of DC were set to 0 (non-treatment), 5, 10 and $20mg{\cdot}L^{-1}$, were treated once 3 days after grafting. Rootstock of the seedlings was shorter in the DC $5mg{\cdot}L^{-1}$ and $10mg{\cdot}L^{-1}$ treatment compared to the non-treatment, and the scions were significantly shorter in the DC $20mg{\cdot}L^{-1}$ treatment. Seedlings were significantly shorter in the DC $20mg{\cdot}L^{-1}$ treatment compared with the non-treatment. Leaf area was lower for seedlings subjected to all treatments than for seedlings in non-treatment group, and reduction was dose dependent. In particular, the DC $20mg{\cdot}L^{-1}$ treatment inhibited both leaf and stem growth. The fresh weighs of leaves and stems of the seedlings treated with DC $5mg{\cdot}L^{-1}$ and the fresh weights of roots subjected to all treatments were significantly greater than those of the non-treatment seedlings. Dry weight per organs of the seedlings treated with DC $5mg{\cdot}L^{-1}$ was significantly greater that of the non-treatment seedlings, but the dry weight of leaves of seedling treated with DC $20mg{\cdot}L^{-1}$ was much less than that of the non-treatment seedlings. The T/R ratio of the seedlings was lower for all treatments than for the non-treatment. The relative growth rate of the seedlings was significantly lower in the DC $20mg{\cdot}L^{-1}$ treatment and, the leaf area rate of seedlings was lower in the DC $5mg{\cdot}L^{-1}$ and $10mg{\cdot}L^{-1}$ treatment than in the non-treatment. Therefore, the optimal concentration of Dinoconazole used to produce a suitable grafted tomato seedling in the summer season is $10mg{\cdot}L^{-1}$ or less.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.