• 제목/요약/키워드: 도어

검색결과 692건 처리시간 0.029초

위상최적화 기법을 이용한 반도체 공정용 압력방폭형 외함 도어의 보강 패턴 최적화 (Topology Optimization of Reinforcement Pattern for Pressure-Explosion Proof Enclosure Door in Semiconductor Manufacturing Process )

  • 김영상;신동석;전의식
    • 반도체디스플레이기술학회지
    • /
    • 제22권2호
    • /
    • pp.56-63
    • /
    • 2023
  • This paper presents a method using finite element analysis and topology optimization to address the issue of overdesign in pressure-explosion proof enclosure doors for semiconductor manufacturing processes. The design conducted in this paper focuses on the pattern design of the enclosure door and its fixation components. The process consists of a solid-filled model, a topology optimization model, and a post-processing model. By applying environmental conditions to each model and comparing the maximum displacement, maximum equivalent stress, and weight values, it was confirmed that a reduction of about 13% in weight is achievable.

  • PDF

지하철 미세먼지 포집을 위한 기술적 진보 (Technological Advances for Particulate Matter Collection in Subway System)

  • 손윤석;류재용
    • 공업화학전망
    • /
    • 제21권2호
    • /
    • pp.24-34
    • /
    • 2018
  • 본 연구에서는 지하역사 및 터널에서 발생되는 미세먼지의 현황 및 이를 저감하기 위한 기술의 동향을 조사하였다. 지하역사 및 터널의 미세먼지 농도는 주변 대기 중의 농도보다 높은 것으로 나타났다. 그 구성 성분에 있어서 다양한 중금속 및 발암물질들을 함유하고 있고, Fe의 농도가 가장 높게 나는 것을 알 수 있었다. 지하역사 및 터널의 미세먼지 농도는 주변 대기 농도와 같은 외부 요인뿐만 아니라 열차의 운행 수, 이용 승객수, 환기량과 같은 내부 요인도 큰 영향을 미치는 것을 확인할 수 있었다. 현재 지하역사 및 터널의 미세먼지를 저감하기 위해서 다양한 기술(환기팬, 스크린도어, 자성필터, 소형제트팬, 인공지능 환기시스템 등)들이 연구되고 있으며, 그 기술들은 현장 조건에 맞추어 사용되어야 그 실효성을 극대화시킬 수 있을 것이다.

악성코드 유형별 공격동향 (Attack Trends by Malware Type)

  • 김종도;이훈재;이영실
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2023년도 제68차 하계학술대회논문집 31권2호
    • /
    • pp.195-196
    • /
    • 2023
  • 코로나19로 인한 비대면 사회의 발전으로 일반인들의 IT이용이 증가하였고, 우크라이나 전쟁이 장기화됨에 따라 주요 기반시설 및 글로벌 기업을 대상으로 대규모 사이버 공격 시도가 증가할 것으로 전망된다. 사이버 공격에는 대부분 악성코드가 활용이 된다. 본 논문에서는 2022년 및 2023년 1분기 중 사이버공격에 많이 활용된 악성코드들의 특징과 동향을 파악한다.

  • PDF

방호가드 인터록장치 성능 유지관리에 관한 연구 (A Study on the Function Maintenance of the Protection Guard Interlock System)

  • 이기택
    • 한국재난정보학회:학술대회논문집
    • /
    • 한국재난정보학회 2023년 정기학술대회 논문집
    • /
    • pp.139-140
    • /
    • 2023
  • 기계·기구, 설비 등(이하 "기계설비")의 주요 위험장소에는 작업자를 통제, 격리하기 위해 방호가드를 고정·설치하는 등 안전사고에 대비하고 있다. 다만 방호가드가 개폐가 용이한 구조일 경우 기계설비 등의 작동 중 작업자 임의 개방에 의한 사고위험에 그대로 노출될 우려가 있어 개폐가 가능한 구조의 방호가드에는 기계설비 가동조건과 연동회로가 구성된 인터록장치를 설치하여 안전사고에 대비하는 것이 일반적이다. 다만 인터록장치는 대부분 기계설비의 가동조건과 하드와이어드(hard-wired)로 결선된 단순 구조가 아닌 PLC(Programmable Logic Controller), 터치판넬, 통신장치 등과 다양하게 다소 복잡한 구조로 설치되어 있고, 인터록장치에 사용되는 센서도 구조, 기능, 사용처 등에 따라 매우 다양화되어 방호도어에 설치되는 안전센서의 사양 선정이 잘 못되거나 설치 후 관리가 미흡할 경우 오작동, 기능해지 등으로 인해 또 다른 사고위험에 그대로 노출될 우려가 있다. 따라서 방호가드에 설치된 인터록장치의 기능해지, 관리소홀 등으로 인해 발생한 사고사례, 아차사고 등을 통해 인터록장치 성능 유지관리를 위한 기술적 사항에 대한 기준을 마련할 필요가 있다.

  • PDF

PLC기반 홈네트워크 구축에 관한 연구 (A Study on Development of Home Network on PLC)

  • 강영구;김금옥;양해술
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2008년도 춘계학술발표대회
    • /
    • pp.25-27
    • /
    • 2008
  • 전력선을 이용한 PLC기술은 경제성과 접근의 용이함으로 현재 많은 각광을 받고 있는 첨단기술이다. 최근 국내외 PLC 핵심기술을 활용한 부가서비스가 개발되고 시장규모가 커짐에 따라 PLC 네트워크 기술의 중요성이 커지고 있다. 본 연구에서는 PLC 핵심기술을 이용해 방범, 가스제어, 조명제어, 가전기기 제어, 도어락 제어, 영상감시, 휴대폰 영상통보 등 기능을 갖춘 PLC 기반 통합관리 네트워크를 제안하고자 한다.

멀티도어코트하우스제도: 기원, 확장과 사례분석 (The Multi-door Courthouse: Origin, Extension, and Case Studies)

  • 정용균
    • 한국중재학회지:중재연구
    • /
    • 제28권2호
    • /
    • pp.3-43
    • /
    • 2018
  • The emergence of a multi-door courthouse is related with a couple of reasons as follows: First, a multi-door courthouse was originally initiated by the United States government that increasingly became impatient with the pace and cost of protracted litigation clogging the courts. Second, dockets of courts are overcrowded with legal suits, making it difficult for judges to handle those legal suits in time and causing delays in responding to citizens' complaints. Third, litigation is not suitable for the disputant that has an ongoing relationship with the other party. In this case, even if winning is achieved in the short run, it may not be all that was hoped for in the long run. Fourth, international organizations such as the World Bank, UNDP, and Asia Development Bank urge to provide an increased access to women, residents, and the poor in local communities. The generic model of a multi-door courthouse consists of three stages: The first stage includes a center offering intake services, along with an array of dispute resolution services under one roof. At the second stage, the screening unit at the center would diagnose citizen disputes, then refer the disputants to the appropriate door for handling the case. At the third stage, the multi-door courthouse provides diverse kinds of dispute resolution programs such as mediation, arbitration, mediation-arbitration (med-arb), litigation, and early neutral evaluation. This study suggests the extended model of multi-door courthouse comprised of five layers: intake process, diagnosis and door-selection process, neutral-selection process, implementation process of dispute resolution, and process of training and education. One of the major characteristics of extended multi-door courthouse model is the detailed specification of individual department corresponding to each process within a multi-door courthouse. The intake department takes care of the intake process. The screening department plays the role of screening disputes, diagnosing the nature of disputes, and determining a suitable door to handle disputes. The human resources department manages experts through the construction and management of the data base of mediators, arbitrators, and judges. The administration bureau manages the implementation of each process of dispute resolution. The education and training department builds long-term planning to procure neutrals and experts dealing with various kinds of disputes within a multi-door courthouse. For this purpose, it is necessary to establish networks among courts, law schools, and associations of scholars in order to facilitate the supply of manpower in ADR neutrals, as well as judges in the long run. This study also provides six case studies of multi-door courthouses across continents in order to grasp the worldwide picture and wide spread phenomena of multi-door courthouse. For this purpose, the United States and Latin American countries including Argentina and Brazil, Middle Eastern countries, and Southeast Asian countries (such as Malaysia and Myanmar), Australia, and Nigeria were chosen. It was found that three kinds of patterns are discernible during the evolution of a multi-door courthouse model. First, the federal courts of the United States, land and environment court in Australia, and Lagos multi-door courthouse in Nigeria may maintain the prototype of a multi-door courthouse model. Second, the judicial systems in Latin American countries tend to show heterogenous patterns in terms of the adaptation of a multi-door courthouse model to their own environments. Some court systems of Latin American countries including those of Argentina and Brazil resemble the generic model of a multi-door courthouse, while other countries show their distinctive pattern of judicial system and ADR systems. Third, it was found that legal pluralism is prevalent in Middle Eastern countries and Southeast Asian countries. For example, Middle Eastern countries such as Saudi Arabia have developed various kinds of dispute resolution methods, such as sulh (mediation), tahkim (arbitration), and med-arb for many centuries, since they have been situated at the state of tribe or clan instead of nation. Accordingly, they have no unified code within the territory. In case of Southeast Asian countries such as Myanmar and Malaysia, they have preserved a strong tradition of customary laws such as Dhammthat in Burma, and Shriah and the Islamic law in Malaysia for a long time. On the other hand, they incorporated a common law system into a secular judicial system in Myanmar and Malaysia during the colonial period. Finally, this article proposes a couple of factors to strengthen or weaken a multi-door courthouse model. The first factor to strengthen a multi-door courthouse model is the maintenance of flexibility and core value of alternative dispute resolution. We also find that fund raising is important to build and maintain the multi-door courthouse model, reflecting the fact that there has been a competition surrounding the allocation of funds within the judicial system.

전기차 인너벨트 웨더스트립용 EPDM/PP Thermoplastic Vulcanizates 재료설계인자에 따른 점탄성과 글라스 마찰 소음 상관관계 연구 (Investigation of Viscoelastic Properties of EPDM/PP Thermoplastic Vulcanizates for Reducing Innerbelt Weatherstrip Squeak Noise of Electric Vehicles)

  • 조승현;윤범용;이상현;홍경민;이상현;서종환
    • Composites Research
    • /
    • 제34권3호
    • /
    • pp.192-198
    • /
    • 2021
  • 전기차의 수요 및 보급이 확대됨에 따라 차량 내 이음(buzz, squeak, rattle, BSR) 개선에 대한 요구가 커지고 있다. 이에 풍절음, 도어 글라스 및 차량 진동을 차단하는 인너벨트 웨더스트립(innerbelt weatherstrip)의 댐핑(damping) 특성 향상을 통해 BSR을 저감하는 기술 개발이 필수적이다. 기존 열경화성(thermoset) 탄성체 대비 가볍고 재활용이 가능한 열가소성(thermoplastic) 탄성체가 주목을 받고 있지만 낮은 소재 댐핑과 영구압축줄음률(compression set)로 인해 도어 글라스와 웨더스트립 간 마찰 소음을 발생하는 문제가 있다. 고분자 댐핑 특성은 점탄성(viscoelastic)에 좌우되므로, 본 연구에서는 인너벨트 웨더스트립과 도어 글라스 간 마찰 소음을 개선하기 위해 EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV)의 재료설계인자(EPDM/PP 비율, EPDM 내 ENB 함량)에 따른 점탄성 분석을 통해 소재 댐핑 특성을 평가하였다. EPDM/PP 비율에 따른 분석을 통해 PP 비율이 낮을수록 소재가 연화되고, 탄성회복력(resilience)이 증가하여 저장탄성률(storage modulus)은 10.8% 감소하고 댐핑 특성을 의미하는 감쇠계수(tanδ)는 88.2% 증가함을 확인하였다. 또한 EPDM 내 ENB 함량이 높을수록 소재의 가교밀도(crosslink density)가 증가하지만, 동적가교(dynamic vulcanizate) 과정 중 PP에 분산된 EPDM particle의 크기가 감소한다. 이로 인해 증가된 EPDM/PP 계면 간 면적 증가로 인해 계면 미끄러짐에서 기인한 손실탄성률(loss modulus)이 24.7% 증가하여 댐핑 특성이 향상되었다. 재료설계인자에 따른 물성분석을 바탕으로 최적 소재(낮은 PP 비율(14 wt%), 높은 ENB 함량 (8.9 wt%))를 배합한 결과 소재 댐핑 특성(tanδ peak)은 기존 소재(PP27, EPDM/PP 30/27, ENB content 5.7 wt%) 대비 140% 증가하여 재료설계인자에 따라 댐핑 특성을 제어할 수 있음을 확인하였다. 설계된 소재의 글라스 마찰 소음 개선 효과를 확인하기 위해 stick-slip 시험을 통해 마찰 소음을 평가하였다. 소재 댐핑 특성이 향상됨에 따라 마찰 진동의 가속도 peak가 약 57.9% 감소하였다. 이러한 결과로부터 재료설계인자에 따른 소재 댐핑 특성 향상을 통해 인너벨트 웨더스트립의 글라스 마찰 소음을 개선할 수 있음을 확인하였으며, 향후 소재 재료설계인자에 따른 물성 제어를 통해 부품의 요구 성능에 맞는 다양한 재료설계에 활용할 수 있을 것으로 기대된다.

위스컨신주 도어지역의 지하수내 납성분의 이동 (Lead Transport in Groundwater in Door County, Wisconsin)

  • 우남칠
    • 자원환경지질
    • /
    • 제27권1호
    • /
    • pp.93-100
    • /
    • 1994
  • 이 연구는 위스컨신주 도어지역의 지하수계에서의 남성분의 이동과 불규칙한 검출에 대한 메카니즘을 규명하였다. 1991년 봄 충진기간 동안에, 세개씩의 수위정(piezometers)을 내장한 두곳의 관측정과 다섯군데의 가정우물에서 수위와 수질의 변화를 측정하였다. 충진현상에 대한 수위의 변화는 지하수의 충진이 약 4일에서 10일 정도 연체되면서 비교적 빠르게 일어남을 보여주며, 이것은 지하수의 충진이 실루리안 돌로마이트 대수층 내에서 높은 수리전도율(K)을 가진 지대를 통해서 일어나고 있음을 지시해준다. 지하수내의 납성분은 미립자에서만 발견되었고, 용융된 상태로는 검출되지 않았다. 그 농도는 0.2에서 $7.1{\mu}g/mg$인데, 이는 지하수내 총 납성분으로는 0.3에서 $4.7{\mu}g/l$이다. 충진사건부터 최대의 미립자가 가정우물까지 이동하는데 걸리는 연체시간은 약 19일에서 22일 이었다. 지하수내에서 납성분이 미립자와 더불어 있으므로, 가정우물 중에서도 높은 수리전도대와 연결된 우물에서만 납성분이 검출되고, 결과적으로 지역적 불규칙성을 유발한다. 또한 우물에서는, 충진사건에 의한 지하수계로의 미립자의 유입량의 변화, 미립자의 이동에 따른 연체현상, 그리고 이동중의 분산 등으로 인해서 납성분의 농도가 채취하는 시간에 따라서 다르게 나타난다.

  • PDF

어휘인출과 구어동반 제스처의 관계 (The Relationship between Lexical Retrieval and Coverbal Gestures)

  • 하지완;심현섭
    • 인지과학
    • /
    • 제22권2호
    • /
    • pp.123-143
    • /
    • 2011
  • 본 연구의 목적은 구어동반 제스처가 어휘인출과정의 개념화와 어휘화 가운데 어떠한 단계와 관계가 있는지를 알아보고자 하는 것이다. 제스처와 발화 분석을 위하여, 모 방송국의 TV 버라이어티 프로그램 중 제시된 목표단어의 의미를 설명하여 전화상대방이 그 단어의 이름을 맞추게 하는 게임의 동영상 자료를 이용하였다. 분석자료로 이와 같은 TV 자료를 선택한 이유는 프로그램의 게임과제가 어휘인출의 개념화 과정과 어휘화 과정을 동시에 유도할 수 있는 과제로 판단되었기 때문이다. 20회의 동영상 자료를 재생하여 목표단어와 목표단어 설명과정에서 출연자들이 산출한 발화를 전사하고, 출연자들이 사용한 제스처를 어휘 제스처(lexical gesture)와 운동 제스처(motor gesture)로 구분하여 기록하였다. 구어동반 제스처가 어휘인출과정의 개념화와 관계가 있는지 알아보기 위하여, 구체적 단어와 추상적 단어 설명 시 동반된 제스처의 사용양상이 다른지, 그리고 단어 개념의 난이도와 제스처 양 사이에 상관관계가 있는지 분석하였다. 제스처가 어휘인출과정의 어휘화와 관계가 있는지 알아보기 위하여, 출연자가 목표단어 설명 시 산출한 발화의 단어 양과 제스처 양, 그리고 저빈도어 비율과 제스처 양 사이의 상관관계를 각각 살펴보았다. 연구결과 단어 개념의 심상성(imageability)에 따라 유의하게 많이 동반되는 제스처가 다르다는 것을 알 수 있었다. 즉 구체적 단어 설명 시에는 추상적 단어 설명 시보다 어휘 제스처가 유의하게 많이 동반되었고, 추상적 단어 설명 시에는 구체적 단어 설명 시보다 운동 제스처가 유의하게 많이 동반되었다. 또한 구체적 단어의 경우 개념의 난이도와 제스처 양 사이에 유의한 상관관계가 있었다. 그러나 목표단어 설명 시 산출된 발화의 단어 양과 제스처 양, 저빈도어 비율과 제스처 양 사이에는 상관관계가 나타나지 않았다. 본 연구의 결과는 구어동반 제스처가 어휘인출과정의 개념화부를 반영한다는 것을 시사한다. 뿐만 아니라 이제까지 많은 연구들에서 간과되어 왔던 운동 제스처의 기능에 대한 새로운 접근을 시도하였다는 점에서 본 연구는 의의가 있을 것이다.

  • PDF

운동기능성과 심미성을 고려한 아웃도어웨어의 디자인개발연구 (Design Process of Outdoor-Wear for Improvement of Comfort and Appearance)

  • 박우미;박춘덕;이귀례;나정은
    • 복식
    • /
    • 제52권8호
    • /
    • pp.29-39
    • /
    • 2002
  • It was increased leisure hours by automation and computerization of industry. Many people spend on hours in enjoying leisure sports, and then. nowadays, Many women tend to prefer casual wear to formal suits. The purpose of this research was to design of outdoor-wear that improve the functional and aesthetic effects for clothing comfort. Total 4 design prototype consisting of jumper and slacks were developed for this research. Outdoor-wear design forced on armhole type of jumper and ease of the back crotch length of slacks to improve the functional and aesthetic effects. And Outdoor-wear design focused on color harmony to aesthetic effects. Ease amount and materials of jumper and slacks were controlled. Design A: Jumper was designed as dropped shoulder with set-in steeve and band collar, A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of outside seam line of slacks Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 7% of total crotch length: Design B 4DM cut pattern were applied to the jumper and slacks pattern. A break-away zipper to facilitate ventilation control were made the area of back of jumper and the area of inside seam line of thigh. Color of jumper and slacks were grey and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design C : Jumper was designed as the set in sleeve and hood. and A break- away zipper to facilitate ventilation control were made the ares of the armhole and elbow. Color of jumper and slacks were ivory and orange color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Design D : Jumper was designed as raglan sleeve. Color of jumper and slacks were olive green color. Ease amount of the crotch length of slacks pattern was constructed as 5% of total crotch length. Total six females, ages 20-45, served as subjects for this research. Subjects have standard body type, generally, wearing 66 size of ready-to-wear clothing. The performance of the newly designed outdoor-wear was evaluated for their effectiveness in several aspects such as conditions of skin temperature, sensory evaluation of comfort during body movements, appearance and color harmony and aesthetic collar design. Design 3 was appeared to be the most positive in aesthetic evaluation and functional effects of design 2 of 4DM cut pattern was appeared to be beter than other designs.