• 대한기계학회논문집A
• /
• 제29권9호
• /
• pp.1282-1288
• /
• 2005

This research has been motivated by the need to minimize possible leakage of microwave when one opens the door during operation of the microwave oven. An explicit finite element program is used to analyze the transient response the door of the oven under door-opening condition. Operation of the micro switch which plays an important role to hun off the power is simulated on the basis of the response of the latch. Using the results of the analysis, twisting deformation of the door frame is defined and evaluated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.7-12
• /
• 2008

A hot stamping technology of vehicle door impact beam made of thin sheet steel has been developed, with the aim of ensuring occupant safety in a side collision. This technology has been implemented to increase the strength of vehicle body parts and to reduce not only the weight of door impact beam but also the number of work processes. Mechanical tests were performed to obtain material properties of hot-stamped specimen and those were used as input data in stamping and structural simulation for optimal design of door impact beam. Strength of hot-stamped door impact beam increased to the value 102% higher than that of conventional pipe-shaped door impact beam and structural simulation showed that hot-stamped door impact beam achieved 28% weight reduction.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.28-34
• /
• 2013

For the senses of beauty and texture, internal components of small passenger cars are manufactured by texturing plastic with drawplate but those of deluxe passenger cars are manufactured by bonding pre-embossed skin to the surface of drawplate. As the pre-embossed skin is bonded at high temperature and pressure, the pattern of skin is distorted. The corner part is hardened and its dimension tolerance is changed by resulting in the increase with its defective rate. This study provides the method to design and manufacture the door trim track by vacuuming the non-patterned skin to upper-side drawplate which forms the pattern of descending skin. It is pressed to the plastic product with hot-press method and the damage of bossed-pattern is prevented. Valuation in this study has been done by analyzing, designing and experimenting method.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.834-840
• /
• 2010

The Sound reduction indices(SRIs) of interior door with 13 different size apertures are measured in acoustic chamber. Also, as a theoretical approach, the SRIs are estimated using Gomperts' theory. In this study, the aperture of interior door is focused on the lower part of door leaf which is well known as a main cause to deteriorate the sound insulation performance of door. The results show that the SRI of door strongly depends on the aperture width and the dip in the measured sound reduction index curve by the resonance effect within aperture is observed at high-frequency. On the whole, the values calculated by theory are in good agreement with the measured values including the position of resonance dip. The average difference between the measured and the calculated values is 0.9 dB for 13 doors with different size aperture in terms of the weighted SRI.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1217-1222
• /
• 2007

With recent advance in automotive noise control engineering reducing major sound sources in the vehicle, customers perceive Buzz, Squeak and Rattle (BSR) as one of important indicators of vehicle quality and durability. As the long-term goal, we expect to establish the integrated design cycle for the reduction of the BSR noise in the early stage of vehicle development. which consist of design, prediction and evaluation procedures. This is possible only with great bulk of experimental data for BSR noise. In this paper, BSR noise is experimentally identified for vehicle doors, which have been traditionally considered as one of main sources of BSR noise. Based on this result, we proposed systematic method for the prevention of BSR noise in the vehicle doors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.565-570
• /
• 1994

This work deals with finding a suitable position correction algorithm of industrial robot based on measuring gaps between door and chassis. The algorithm calculates correction quantities and then must allow visually acceptable door-chassis assembly take. The algorithm simulation is performed for a simple door-chassis model, and its effectiveness is addressed in terms of the predefined total unformity, line uniformity. In addition, the error sensitivity analysis of the rotation center of door due to the mismatch of robot grasping is performed using the algorithm.

• 한국의류학회지
• /
• 제26권12호
• /
• pp.1756-1764
• /
• 2002

본 연구의 목적은 의복시스템 내 에서 착탈이 가능한 라이너 가 있을 때 얼마만큼의 보온성 이 증가되는가를 알고자 하는 것이다. 서로 다른 섬유조성 과 두께를 가지는 3개 의 의복앙상블을 선정하여 움직일 수 있는 마네킨을 사용하여 14$^{\circ}C$로 조절되어 있는 인공기후실에서 보온성을 측정하였다. 그 결과 라이너 사용 후 보온성이 증가되었는데 그 정도는 라이너 의 두께 와 섬유조성에 따라서 다르며 약 0.5 clo 증가하였다. 이 결과로부터 착탈 가능한 라이너의 사용으로 추운기후에 어느 정도 적응 할 수 있는가를 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.379-385
• /
• 2016

Door impact beam plays a key role in minimizing the occupant injury within the side impacted vehicle through preventing intrusion of the impacting vehicle. Steel pipe type door impact beam has been widely adopted since it has simple structure and the overall strength is easily determined according to the pipe size. The brackets welded at pipe ends connect the door impact beam and the door panels by spot welds. In this study, first, the effect of pipe thickness, bracket thickness and door mounting stiffness was respectively analyzed. Next, application of the tailor rolled pipe was examined and several alterations of the bracket mounting method were considered. Application of tailor rolled pipes with superior bracket mounting method showed remarkable strength enhancement and weight reduction possibility in comparison with the current door impact beam.

• 설비공학논문집
• /
• 제18권2호
• /
• pp.103-111
• /
• 2006

To optimize the ventilation and smoke control systems in subway equipped with platform screen door, the technology to analyze the unsteady tunnel flow caused by running of train should be developed. The development of model experiment and numerical analysis technique with relation to unsteady flow of subway were presented. The pressure and air velocity changes in 1/20-scaling experiment unit were measured and results were comparied to those of 3-D unsteady numerical analysis applied with sharp interface method. The experimental and numerical results were quantitatively similar and it would be reasonable to apply sharp interface method to analyze the unsteady flow in subway equipped with platform screen door.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.109-111
• /
• 2008

전동기 구동시스템의 모델링을 위해서는 부하의 부하토크, 관성계수, 마찰계수 등의 정보에 의한 부하 모델링이 반드시 필요하다. 하지만 기본적인 부하모델의 제정수와 단순화된 운동방정식만으로는 기계적 각 부분에서의 발생하는 현상에 대한 해석이 불가능 하다. 본 논문에서는 엘리베이터 도어 구동시스템을 대상으로 기계 해석 분야의 해석 프로그램인 RecurDyn과 전력전자 분야의 시뮬레이션 프로그램인 Simplorer의 Co-Simulation을 통한 부하 모델 및 구동 시스템의 해석 가능성과 해석 범위를 분석하고 실험을 통해 타당성을 검증하고자 한다.