• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.887-895
• /
• 2017

This paper presents a study on the accelerated life tests of parts that operate during the opening and closing of door frames, particularly door hinges. Hinge theoretical verification and validation of the test equipment in the present study and the different structures and fault mode, depending on the purpose of usage analysis, failure mode for one of the hinges of the switchgear components used for electromagnetic shielding facilities and on-site operating conditions. The accelerated life test was designed for the characteristic lifetime prediction of the components, by estimating the shape parameter and the acceleration factor.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.2
• /
• pp.207-215
• /
• 2012

The 45-degree cone failure theory has been used in concrete anchor bolts design under shear loading, but the CCD (Concrete Capacity Design) method was adopted as a new design method since 2000. However, the method was allowed only for anchor diameters of less than 50mm because it is based on the experimental results of small size anchor bolts. Therefore, it is necessary to develop a rational concrete breakout capacity equation for medium-to-large size anchor bolts with large edge distance. In this study, shear tests on M56 cast-in-place single anchor bolt with edge distance of 350mm were performed using four test specimens. Based on the test results and findings of existing studies, a new equation for the breakout capacity of anchor bolts under shear loading with edge distance of up to 750mm was proposed.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.493-501
• /
• 2011

The $45^{\circ}$cone failure theory has been used for concrete anchor bolt design, but the CCD (concrete capacity design) method was adopted as a new design method in 2000. The method was allowed to be used, however, only for anchors with a diameter of less than 50 mm and an embedment depth of less than 635 mm because it is based on the experiment results from medium-sized to small anchor bolts. Therefore, it is necessary to develop a rational concrete breakout capacity equation for medium-sized to large anchor bolts. In this study, tension tests on an M56 cast-in-place single anchor bolt with an effective embedment depth of 400-450 mm were carried out for the five test specimens. Based on the test results together with the other recent test results, the applicability of the concrete breakout capacity equation in the current design code to the large to medium-sized anchor bolts with an embedment depth of 280-1,200 mm was estimated.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.80-85
• /
• 1997

Preventive diagnosis technique of power transforms is very important for highly reliable operation of power systems, and especially that of online transformer is needed in view of economy. Acoustic methods for partial discharge points have been studied abroad since 1960's in earnest. Electric-ultrasonic locating method by which partial discharges are found through detecting the electric and ultrasonic signal generated in partial discharge and ultrasonic-ultrasonic locating method by which partial discharges are found through detecting two ultrasonic signal with two ultrasonic sensor have been researched in our country. By using this ultrasonic-ultrasonic locating method, it was proposed of graphical determination technique of partial discharge points one dimension, two dimension, three dimension. But in locating partial discharges, they have assumed that the number of signal origin is one. So in this study we suggests a method of locating and knowing the number of signal origins when there are several origins by using ultrasonic-ultrasonic method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.273-281
• /
• 2010

In this paper, a method to predict the fatigue life of an axle drive shaft by the calibrated accelerated life test (CALT) method is proposed. The CALT method is very effective for predicting lifetimes, significantly reducing test time, and quantifying reliability. The fatigue test is performed by considering two high stress and one low stress levels, and the lifetime at the normal stress level is predicted by extrapolation. In addition, in this study, the major reliability parameters such as the lifetime, accelerated power index, shape parameter, and scale parameter are determined by conducting various experiments. The lifetime prediction of the axle drive shaft is verified by comparing the experimental results with load spectrum data. The results confirm that the CALT method is effective for lifetime prediction and requires a short test time.

• Journal of the Korean Geographical Society
• /
• v.35 no.1
• /
• pp.95-120
• /
• 2000

구성주의 수업은 삶의 경험 혹은 나의 문제로 전환된 문제를 학습주제로 하여, 교사와 학습자, 학습자간에 상호성과 상보성이 전제된 대화화 협력을 통해, 맥락에 적합한 지식을 구성하는 활동이라 할 수 있다. 구성주의 지리교육은 지리학을 위해 지리적 지식을 구성하는 것이 아니라, 지리적 삶을 위해 지리적 지식을 구성하는 것이다. 이것은 지리적 맥락과 맥락의 구성에 충실할 때 가능해 진다. 방법론적으로는 생활 주변에서 볼 수 있는 지리적 사상을 학습대상으로 하여, 이들을 그림이라는 상징을 통해 학습자 스스로 맥락에 따라 구성, 재구성하는 과정 속에 지리적 지식이 구성되게 하는 것이다.

• 전기의세계
• /
• v.28 no.10
• /
• pp.9-16
• /
• 1979

근래 우리나라의 국민소득이 높아짐에 따라 가전제품의 수요가 늘고, 중화학공업의 발달에 따라 전력수요가 급격히 증가하고 있다. 이에 반하여 석유가는 매년 증가하고 있으므로 기력발전소를 지양하고 대용량의 원자력, 양수발전소, 석탄발전소가 건설되고 있는 경향이 있다. 발전소는 입지조건상 해안 또는 강변에 위치하고 있으며 수요지와는 거리가 멀고 또는 계통의 안전도(Stability), 신뢰도(Reliability)를 높이기 위하여 154KV와 345KV 송전선으로 전계통을 연계하고 있다. 송전선의 전력운송능력을 증대시키기 위하여 복도체 또는 사도체로 하고 있으며 전선도 ACSR에서 TACSR로 하는 나라도 있다. 현재 미국에서는 765KV Canada에서는 735KV 송전선으로 운전되고 있으며 장차 1500KV 송전선도 곧 실용화된다고 한다. 이에 따라 송전선의 지지물인 철탑도 대형화되어가고 높이도 증가하게 되어 이의 제작및 건설비가 막대하게 들게되며 앞으로는 용지확보도 더욱 어렵게 되어 송전선의 회전수를 2 또는 4회선으로 건설하여야 될것이다. 송전선철탑설계는 종래에는 Cremona도식해법에 의하여 설계하였으나 이의 작도및 하중조건이 많아지면 부재의 정확한 설계하중을 산출하는 데는 많은 시간과 노력이 필요하다. 이러한 불편을 헤소하기 위하여 Ritter의 수치해석법(moment 방법)을 이용한 전산화 및 설계이론에 대하여 소개하고자 한다.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.83-91
• /
• 2000

The first Procedure to identify structural system by using measured data is transformation of data to frequency domain and try to recognize modal characteristics in graphical condition. Those methods are doubted about the reliability to the civil structures, especially bridges which has coupled and close modal characteristics. In this paper, feasibility of time domain modal Identification methods were examined and applied double least square method to overcome bias characteristics of the identification methods. To show the advantage of proposed method, simulation were carried out for mass-spring model. And to examine the usage of the method in realistic case, sensitivity of the methods to noise was performed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1221-1229
• /
• 2014

This paper proposes an approach for predicting the fatigue life of a propeller shaft of a forklift truck by an accelerated life test method. The accelerated life test method adopted in this study is the calibrated accelerated life test, which is highly effective in the prediction of the lifetime and enables significant reduction of the test time as well as a quantification of reliability in the case of small sample sizes. First, the fatigue test was performed under two high stress levels, and then, it was performed by setting low stress levels in consideration of the available test time and extrapolation. Major reliability parameters such as the lifetime, accelerated power index, and shape parameter were obtained experimentally, and the experimentally predicted lifetime of the propeller shaft was verified through comparison with results of an analysis of load spectrum data under actual operating conditions.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.3
• /
• pp.219-228
• /
• 2010

This paper describes an experimental research on the structural behavior and the ultimate strength of longitudinally stiffened plates subjected to local, distortional, or mixed-mode buckling under compression. The stiffened plate undergoes local, distortional, or interactive local-distortional buckling according to the flexural rigidity of the plate's longitudinal stiffeners and the width-thickness ratios of the sub-panels of the stiffened plate. A significant post-buckling strength in the local and distortional modes affects the ultimate strength of the longitudinally stiffened plate. Compression tests were conducted on stiffened plates that were fabricated from 4mm-thick SM400 steel plates with a nominal yield stress of 235MPa. A simple strength formula for the Direct Strength Method based on the test results was proposed. This paper proves that the Direct Strength Method can properly predict the ultimate strength of stiffened plates when the local buckling and distortional buckling occur simultaneously or nearly simultaneously.