• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.519-529
• /
• 2003

In recent years, the use of cold-formed steel roof truss has been increased in the steel houses and high-rise apartments. The design of the roof truss anchor connections has been based on the experience and decision of designers. In this paper, the structural behavior of anchor connections based on experimental and decision is described. In the tests, truss members and connection members were jointed directly with self-drilling screw fasteners and the simple shaped connection member with excellent workability and structural capacity was used to connect roof truss and sub-structure. The connecting method was selected according to the construction material of sub-structure: chemical anchor for reinforced concrete structure and welding or DX-Pin for steel structures. The pull-out tests of various type anchor connection were executed to obtain the strength and the stiffness and the result have been compared with AISI(1996) and AlSC(1989) specifications, Simple formulas for the shear strength of screw connections have been propose and compared with tests.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.1
• /
• pp.8-14
• /
• 1997

Stress wave velocity, wave impedance, and stress wave elasticity of small, clear bending specimens of five domestic softwoods (Pinus densiflora, Pinus koraiensis, Chamaecyparis obtusa, Cryptomeria japonica, and Larix leptolepis) and four tropical hardwoods(Kempas, Malas, Taun, and Terminalia) were correlated with static bending modulus of elasticity(MOE) and modulus of rupture(MOR). The degree of correlation between stress wave parameters and static bending properties was dependent on wood species tested. Stress wave elasticity and wave impedance were better predictors for static bending properties than stress wave velocity for each species individually and for softwood or hardwood species taken as a group, even though elasticity and impedance were nearly equally correlated with static bending properties apparently. Based upon the correlation coefficient between stress wave parameters and static properties, stress wave elasticity and wave impedance were found as stress wave parameters which can be used for the purpose of the reliable and successful prediction of bending properties. The degree of correlation between static MOE and MOR was also different according to wood species tested. Static MOE was nearly as well correlated with MOR as was stress wave elasticity. The results of this research are encouraging and can be considered as a basis for further work using full-size lumber. From the results of this study, it was concluded that stress wave measurements could provide useful predictions of static bending properties and was a feasible method for machine stress grading of domestic softwoods and tropical hardwoods tested in this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.475-482
• /
• 2014

The precision hydraulic valve is widely used in various industrial field like aircraft, automobile, and general machinery. Servo actuator is the most important device for driving the precise hydraulic valve. The reliable operation of servo actuator effects on the overall hydraulic system. The performance of servo actuator relies on frequency response and step response according to arbitrary input signal. In this paper, we performed the analysis for the components of servo actuator to satisfy the reliable operation and response characteristics through the reliability analysis, and also induced the design parameters to realize the reliable operation and fast response characteristics of servo actuator for hydraulic valve operation through the empirical knowledge of experts and electromagnetic theories. We suggested the design equations to determine the values of design parameters of servo actuator as like bobbin size, length of yoke and plunger and turn number of coil, and verified the achieved design values through FEM analysis and performance tests using some prototypes of servo actuators adapted in hydraulic valve.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.156-164
• /
• 2003

STS316L had been used as the structural material for energy environmental facilities, because austenite stainless steels like 316L have superior mechanical properties of which toughness, ductility, corrosion resistant and etc. However, those welded structures are receiving severe damage due to increasing of the aged degradation. Most studies until now have been carried out against fatigue behaviors of weldments, and were not well studied on nondestructive evaluation methods. In this study, the fatigue crack propagation behavior of STS316L weldment usually used for vessels of the nuclear power plant was investigated. Also, the degradation characteristics of 316L stainless steel weldments were evaluated by the ultrasonic parameter such as ultrasonic velocity, attenuation factor and time-frequency analysis. The results of this study can be used as a basic data for the prediction of the fatigue crack life of weldments structures without disjointing or stopping service of structures in service.

• Journal of Life Science
• /
• v.24 no.12
• /
• pp.1378-1382
• /
• 2014

Phospholipase D (PLD) catalyzes the hydrolysis of phospholipid to phosphatidic acid (PA), a lipid secondary messenger. Two forms of PLD isozymes, phosphatidylcholine-specific PLD1 and PLD2, have been identified. PLD has emerged as a critical regulator of cell proliferation and survival signaling, and dysregulation of PLD occurs in a various illnesses, including cancer. PLD activity is essential for cell survival and protection from apoptosis. Overexpression of PLD isozymes or PLD-generated PA attenuates the expression of apoptotic genes and confers resistance to apoptosis. The apoptosis-related molecular mechanisms of PLD remain largely unknown. Recently, the dynamics of PLD turnover during apoptosis have been reported. The cleavage of PLD isozymes as specific substrates of caspase differentially regulates apoptosis. PLD1 is cleaved at one internal site, and PLD2 is cleaved two sites at the front of the N-terminus. The cleavage of PLD1 reduces its enzymatic activity, probably via the dissociation of two catalytic motifs, whereas the cleavage of PLD2 does not affect the catalytic motifs and its activity. Thus, PLD2 maintains antiapoptotic capacity, despite its cleavage. Therefore, the differential cleavage pattern of PLD isozymes by caspase affects its enzymatic activity and antiapoptotic function. Thus, PLD is considered a potential target for cancer therapy. We summarize recent studies regarding the functional role of PLD in apoptosis.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.305-311
• /
• 1992

The experimental study on the reduction of $In_2O_3$ was performed by using thermogravimetric analyzer. The reduction of $In_2O_3$ was occurred at above $300^{\circ}C$. The reduction rates were rapidly increased with the reaction temperature, whilehardly affectedby the flow rate of hydrogen gas. It was found that the unreacted core model could be applied for the analysis of the reduction data and the rate control step was the chemical reaction of $In_2O_3$ with hydrogen on the surface of unreacted $In_2O_3$. The apparent activation energy for this reaction was 20kcal/g-mol $H_2$ and the rate equation of $In_2O_3$ reduction with hydrogen could be expressed in the following equation. ${\frac{dX}{dt}}=1.6{\times}10^5e^{-20000/RT}(1-X)^{2/3}$

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.43-52
• /
• 2005

Highway classification is an essential part of defining design criteria of roads. This study is to classify highways by factor analysis. To accomplish the objectives, factor analysis is performed for classifying highways using the traffic data observed at the permanent traffic count points in 2004. A total off variables are applied : AADT, K factor, D factor, heavy vehicle proportion, day time traffic volume proportion, peak hour volume proportion, sunday factor, vacation factor and COV(Coefficient of Variation). The results of factor analysis show that variables are divided into two factors, which are the factor related to the fluctuational characteristics of traffic volume and the factor related to heavy vehicle and directional volume characteristics. According to the results of cluster analysis, 353 permanent traffic count points are categorized into such three groups as type I for urban highway, type II for rural highway, type III for recreational highway, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.3
• /
• pp.219-228
• /
• 2010

This paper describes an experimental research on the structural behavior and the ultimate strength of longitudinally stiffened plates subjected to local, distortional, or mixed-mode buckling under compression. The stiffened plate undergoes local, distortional, or interactive local-distortional buckling according to the flexural rigidity of the plate's longitudinal stiffeners and the width-thickness ratios of the sub-panels of the stiffened plate. A significant post-buckling strength in the local and distortional modes affects the ultimate strength of the longitudinally stiffened plate. Compression tests were conducted on stiffened plates that were fabricated from 4mm-thick SM400 steel plates with a nominal yield stress of 235MPa. A simple strength formula for the Direct Strength Method based on the test results was proposed. This paper proves that the Direct Strength Method can properly predict the ultimate strength of stiffened plates when the local buckling and distortional buckling occur simultaneously or nearly simultaneously.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.168-171
• /
• 2003

The IMEF(Irradiated Materials Examination Facility), located in KAERI site, is a hot cell facility to test and evaluate the irradiation defects or embrittlement through post-irradiation examination(PIEs) of irradiated nuclear fuels and structural materials which are come from HANARO research reactor and commercial nuclear power plants. Therefore, to carry out its own function, the high level solid radioactive wastes, produced through PIEs, are periodically carried out and managed from hot cell to monolith. So far, approximately 30 drums which contains 50 liters are transported to monolith, and it is shown that the quantity is slowly increasing, In this paper, the procedures and work contents of the high level solid radwaste carrying out and management for IMEF are described in detail.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1210-1215
• /
• 1999

Optimum conditions of the hydrogenation of PNA to pure PPD were determined in a three-phase slurry reactor with suspended Pd/C catalyst particles. Minimization of mass transfer resistances at the interfaces of both gas-liquid and liquid-catalyst particles and control of overall reaction rate on catalyst surface leaded to decrease the hydrogen starvation on reaction active sites and to reduce the side reactions during hydrogenation. The optimum temperature, pressure, and catalysst concentration were confirmed to be in the range of $60^{\circ}C$, 60~70 psig, and 1~2 g-cat/L, respectively. Reaction rate was zero order with respect to the concentration of PNA and 1st order with respect to the pressure of hydrogen(P). Overall rate expression of the reaction was $R_A=6.44{\times}10^6{\cdot}H{\cdot}P{\cdot}m{\cdot}$exp(-4659/T) where H is constant, m is concentration of catalyst, and T is temperature.