• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.627-635
• /
• 2014

Currently the highest speed limit on the road traffic congestion or because you can not cope with climate change to cause a traffic accident may be a factor. According to the Road Traffic Act as well as 20% to 50% in case of inclement weather, but the driver must slow speed left to the judgment of the difficulties, and to slow the vehicle and the relative velocity between the vehicle does not run longer be a big influence on the environment and safety. Thus, variable speed control for drivers on the road, specify the appropriate maximum speed limit in bad weather It keeps motorists slowed the run rate to prevent accidents or reduce the severity of accident damage is expected to be possible. The purpose of this study is the frequent traffic accidents Continuous Busan (City Freeway) around the variable speed control in the appropriate sections so that it can be done by analyzing the characteristics of traffic accidents were the severity of the accident. Highway and urban environment, the geometry of the structure because it has a lot of Curved planar point compared to wet and dry road surfaces by simulated rain wet had bom the more the speed the greater the risk of an accident was the result. Based on these results, the primary section, first urban highway tunnel, near the lamp, near Toll Plaza, near binary Outlet after considering various factors such as speed reduction is needed in the first period by conducting awareness and recognize the need for the participation of the driver and the future city installation and operation of highways in all sectors is expected to be expanded.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.65-74
• /
• 2021

This study empirically analyzes the effect of pedestrians' personal and household characteristics and accessibility to public facilities on a walking safety satisfaction (WSS) level. The aim is to find ways to improve vulnerable pedestrians' WSS level and contribute to the creation of an inclusive urban environment. As a result of the analysis, age and gender variables were important for elderly people, and education was an important factor for disabled people. The WSS level was impacted by the factors of single-person households, income, and residential areas. In the case of accessibility to public facilities, the greater the satisfaction with accessibility to public institutions, urban parks and green areas, and public transport, the greater the WSS for the elderly and the disabled. And, the greater the satisfaction with accessibility to commercial facilities, the greater the WSS was for the elderly's WSS. However, the satisfaction with access to medical facilities was the opposite in the case of the elderly.

• Journal of the Korean association of regional geographers
• /
• v.15 no.5
• /
• pp.537-553
• /
• 2009

This study aims to present promotion strategies for regional industries by exploring the ways to build industrial cluster focusing on regional strategic industries of Gyeongsanbuk-do(province) which are related to innovation city, by taking Gyeongbuk innovation city as an example. This study presented the methods for linking with innovation cities that focus on regional strategic industries, along with the analysis on the linkage between regional industries and public organizations relocated to local regions. As to the methods for the linkage, methods to build clusters based on the characteristics of each industry, such as electronic information device, new material parts, biological oriental medicine, cultural tourism, eco-friendly energy, etc, which are strategic and leading industries of Gyeongsanbuk-do(province), were presented. It was inferred that the industries which have achieved fast growth such as IT and BT industries, required mutually interconnected collaboration through geographical proximity among related subjects, while sectors with mature technologies, such as automative parts, machinery, steel industries, etc, were found to require more extensive infrastructures like the support of transportation and distribution for promoting current clusters.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.107-118
• /
• 2022

As connected and automated driving(CAD) technology is entering its commercialization stage, service platforms providing CAD-based mobility services have increased these days. However, CAD-baded mobility services with these platforms need more consideration for the demand for mobility services when determining target areas for CAD-based mobility services because current CAB-based mobility design focus on driving performance and driving stability. For a more efficient design of CAD-based mobility services, we analyzed the applicability for the introduction of CAD-based mobility services in terms of driving difficulty of CAD and demand patterns of current non-CAD based-mobility services, e.g., taxi, demand-responsive transit(DRT), and special transportation systems(STS). In addition, for the spatial analysis of the applicability of the CAD-based mobility service, we propose the Index for Autonomous Driving Applicability (IADA) and analyze the characteristics of the spatial distribution of IADA from the network perspective. The analysis results show that the applicability of CAD-based mobility services depends more on the demand patterns than the driving difficulty of CAV. In particular, the results show that the concentration pattern of demand in a specific road link is more important than the size of demand. As a result, STS service shows higher applicability compared to other mobility services, even though the size of demand for this mobility service is relatively small.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.91-99
• /
• 2015

This study intends to build a traffic accident predictive model considering road geometrics, traffic and enviromental characteristics and identify the relationship of 4-legs intersection accidents in Seoul and Busan metropolitan area. The RPNB(Random Parameter Negative Binomial) model shows improvement over the fixed NB(Negative Binomial) and out of 53 variables, 10 variables (main road number of lane, main road vehicle traffic volume(left), minor road vehicle traffic volume(right), main road drive restriction, minor road sight distance, minor road median strip, minor road speed limit, minor road speed restriction) showed to have significant variables affecting traffic accident occurrences in 4-legs signilized intersections. Also, among 10 significant variables, 2 variables(minor road sight distance, minor road speed restriction) found to be random parameters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.146-164
• /
• 2022

Recently, the Korean government promoted the construction of metropolitan express subway to connect major transportation hub in the metropolitan area within 30 minutes. Most stations of the metropolitan express subway are connected to existing subway stations, so the importance of transfer increased. Although many studies have been conducted on the effect of transfer penalty on route choice, there are few studies on the transfer behavior of the metropolitan express subway. Therefore, in this study, a transfer behavior analysis was conducted on the Shinbundang Line, a representative metropolitan express subway. To analyze the transfer behavior according to the degree of traffic congestion and the presence of fare payment, route choice models were made using transport card data divided according to week, time, and user characteristics. As a result of the analysis, users of the metropolitan express subway had greater disutility to the transfer waiting time compared to the transfer moving time. Furthermore, especially during the peak time, EIVM(Equivalent in-vehicle minutes) of the transfer waiting time was 3.51. In this study, EIVM for metropolitan express subway users were analyzed to be 2.6 minutes, which is significantly lower than the results of previous studies on subways. This suggests that there is a difference in the transfer penalty between subways and metropolitan express subway, and that it is necessary to apply the transfer penalty between subways and express subway differently when forecasting subway traffic demand.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.203-208
• /
• 2011

Traffic demand is continuously increasing due to the development of urban areas in Korea. To cope with this, many efforts have been done including constructions of new roadways and increasing the number of lanes of the existing roadways. Those efforts, however, have been performed for only a short segment of target links having similar traffic characteristics. As a result, most urban cities experience bottle-neck phenomena which lead decreasing flow speed and increasing possibilities of accidents. Thus, this study aims to analyze problems of bottle-neck phenomena and effects of balancing number of lanes along the same corridor having similar traffic characteristics. For this, Route 32 passing the city of Daejeon in Korea has been selected as a case study, and a micro-simulation tool, VISSIM, has been adopted for the analysis. The results show that balanced number of lanes along the same corridor with similar traffic characteristics can increase flow speeds and enhance safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.113-129
• /
• 2021

Recently, traffic congestion in the city is continuously increasing due to the expansion of the living area centered in the metropolitan area and the concentration of population in large cities. New road construction has become impossible due to the increase in land prices in downtown areas and limited sites, and the importance of efficient data-based road operation is increasingly emerging. For efficient road operation, it is essential to classify appropriate scenarios according to changes in traffic conditions and to operate optimal signals for each scenario. In this study, the Dynamic Time Warping model for cluster analysis of time series data was applied to traffic volume and speed data collected at continuous intersections for optimal scenario classification. We propose a methodology for composing an optimal signal operation scenario by analyzing the characteristics of the scenarios for each data used for classification.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.89-98
• /
• 2013

In recent years, it was recognized that aurban policy paradigm of sustainable urban growth management and transportation policies have been shifted : from the era of automobile-oriented policy to the era of public transport policy. Against this backdrop, the introduction of the multi-modal transfer center is very consequential. Therefore, it is necessary for the introduction of wide-area and local-centric transfer facilities, as well as the center of the country-led national backbone transfer center. This study was applicable at the multi-modal transfer center plans to introduce guidelines to provide transit facilities, considering the regional and functional characteristics to classify the types of multi-modal transfer center. The final types of multi-modal transfer center were classified into six, and by considering the combination of the criteria to be classified. The multi-modal transfer center type classification based on the case analysis of the types of facilities at domestic and abroad. If the data of multi-modal transfer are accumulated continuously, can expect a more reliable type classification.

• The Journal of the Korea Contents Association
• /
• v.18 no.12
• /
• pp.444-455
• /
• 2018

In regard to the growth and development of Innocity from improvements in Innocity settlement environment, this research examines the level of satisfaction of Innocity settlement environment to propose a political implications. We deduced the main cause of settlement environment satisfaction by performing logistic regression on the public institution employees level of satisfaction in respect to 4 Innocity characteristics?six physical properties, three social properties, five facility properties, three economical properties?and three general questions. As a result, the greatest factor of settlement environment was physical properties, such as natural environment and scenery, residential environment, availability of diverse uses in the surrounding area, and access to public transportation. In addition, social characteristics (relationships with neighbors), and facilities (availability of industrial, research and educational facilities) were also significant. This research provided political implications for future Innocity settlement environment improvements despite limiting factors such as residents' perception and limited surveyed sites.