• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.349-361
• /
• 2006

New directions on rural policy have been discussed due to the domestic and international environmental changes such as the price degradation of agricultural products, maintenance of rural landscape, and so on. Development of amenity in rural areas has been come out as the one of new policy directions. Amenity defines as, in a very broad way, the public benefits accruing from the condition of a place, such as aesthetic beauty, clean air and water, or good street lighting. Amenity in rural area is referred as a resource with a potential possibility for development. Among them rural landscape is regarded as the one of major resources. In Jeju, particularly, stone wall retains the most esthetic landscape in rural regions. In addition, the Ministry of Culture and Tourism appointed stone wall as the one of important components in rural landscape and one of the 100 national historic symbols. Stone wall in Jeju has its intrinsic and real value and is widespread in rural regions. However, in spite of it's popularity, the landscape of stone wall has been degraded without any concerns and has been partly destroyed. Landscape of stonewall should be maintained and the depth of concerns and systematic management measures for protection should be discussed. In this sense, the purpose of this paper, first of all, is to examine the status of stone wall and to evaluate the landscape of stone wall in Jeju. GIS is used as an analysis tool. Several areas such as Hankyung, Namyeup, and so on in Jeju are selected as the case areas for this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.285-290
• /
• 2019

This study aims to compare the energy consumption characteristics of high-rise and general apartments and propose policy implications in Incheon City where high-rise apartments are planned. The method of analysis is to select the cases, to conduct field survey, drawing review, analysis of Electric Architectural administration Information System. The study derived the current status of energy consumption in high-rise and general apartment complexes located in the same region, Yeonsu-gu Incheon City, and performed comparative analysis on their characteristics. First, electrical energy in the high-rise apartment complexes was consumed excessively, by 1.63 to 2.5 times more than that of the general apartment complexes. Second, the gas energy usage in the high-rise apartment complexes was higher than that of the general complexes, by 1.09 to 1.2 times. Third, the energy consumption per unit area in the high-rises was also higher, by 1.042 to 1.3 times. As individual elements such as incomes, living standards, and life patterns of the residents affect energy consumption, the high-rise apartment complex consumed more energy per unit area than the general apartment complex did. However, this study did not consider the elements of energy expenditure and satisfaction level, which are the limitations of this research.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.74-83
• /
• 2008

As urban residents' standard of living has recently risen, efforts to improve urban landscapes have increased. It is very important to manage streetscapes to improve the urban landscape because they are one of the essential elements in city construction and urban landscaping. This study focuses on the indicators that manage streetscapes more accurately and realistically. To achieve this purpose, this study used dynamic simulations considering shape and layout of buildings, the primary factors in streetscapes. This study can be summarized as follows: 1. Two indicators to manage streetscape were investigated in previous studies: one to increase visual openness and the other to reduce visual overstimulation. These indicators had high correlation with scenic beauty. Therefore, increasing openness and reducing overstimulation are essential to improve streetscapes. 2. Two household tower type buildings should be arranged along roadsides to increase openness and scenic beauty. However, low tower buildings with two household are not suitable along roadsides because they create monotony and intervals are needed between buildings. 3. To increase openness, the angled arrangement of buildings is suggested $75^{\circ}{\sim}90^{\circ}(105^{\circ}{\sim}135^{\circ})$ for low buildings, $30^{\circ}{\sim}45^{\circ}(135^{\circ}{\sim}150^{\circ})$ for mid-sized buildings, and $75^{\circ}{\sim}90^{\circ}(105^{\circ}{\sim}135^{\circ})$ for high buildings. 4. To reduce overstimulation, the height and setback control regulations should be at an angle of less than $45^{\circ}$. This study suggests more accurate management guidelines by organizing the indicators that could effectively manage streetscapes and by overcoming limitations of reality shown in a static simulation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.44-52
• /
• 2014

Leakage is an important factor to be considered for the management of underground water supply pipelines in a smart water grid system, especially if the pipelines are aged and buried under the pavement or various structures of a highly populated city. Because the exact detection of the location of such leaks in pipelines is essential for their efficient operation, a new methodology for leak location detection based on frequency band variation, windowing filters, and probability is proposed in this paper. Because the exact detection of the leak location depends on the precision of estimation of time delay between sensor signals due to leak noise, some window functions that offer weightings at significant frequencies are applied for calculating the improved cross-correlation function. Experimental results obtained by applying this methodology to an actual buried water supply pipeline, ~ 253.9 m long and made of cast iron, revealed that the approach of frequency band variation with those windows and probability offers better performance for leak location detection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.69-77
• /
• 2022

The 3D spatial model is an analysis framework for solving urban problems and is used in various fields such as urban planning, environment, land and housing management, and disaster simulation. The utilization of drones that can capture 3D images in a short time at a low cost is increasing for the construction of 3D spatial model. In terms of building a virtual city and utilizing simulation modules, high location accuracy of aerial survey and precision of 3D spatial model function as important factors, so a method to increase the accuracy has been proposed. This study analyzed location accuracy of aerial survey and precision of 3D spatial model by each condition of aerial survey for urban areas where buildings are densely located. We selected Daerim 2-dong, Yeongdeungpo-gu, Seoul as a target area and applied shooting angle, shooting altitude, and overlap rate as conditions for the aerial survey. In this study, we calculated the location accuracy of aerial survey by analyzing the difference between an actual survey value of CPs and a predicted value of 3D spatial Model. Also, We calculated the precision of 3D spatial Model by analyzing the difference between the position of Point cloud and the 3D spatial Model (3D Mesh). As a result of this study, the location accuracy tended to be high at a relatively high rate of overlap, but the higher the rate of overlap, the lower the precision of 3D spatial model and the higher the shooting angle, the higher precision. Also, there was no significant relationship with precision. In terms of baseline-height ratio, the precision tended to be improved as the baseline-height ratio increased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.171-178
• /
• 2019

Fiber-reinforced polymer (FRP) composites have proved to be reliable as strengthening materials. Most of existing studies used single types of FRP composites. Therefore, in this experimental study, carbon FRP sheet, aramid FRP sheet, and hybrid FRP plate including glass fibers were fabricated, and the effect of pre-stressed FRP composites on flexural strengthening of reinforced concrete (RC) beams was investigated. In total, eight RC beam specimens were fabricated, including one control beam (specimen N) without FRP composites and seven FRP-strengthened beams. The main parameters were type of FRP composite, the number of anchors used for pre-stressing, and thickness of FRP plates. As a result, the beam strengthened with pre-stressed FRP plate showed superior performance to the non-strengthened one in terms of initial strength, strength and stiffness at yielding, and ultimate strength. As the number of anchors and thickness of FRP plate (i.e., amount of FRP plates) increased, the strengthening effect increased as well. When hybrid FRP plates were pre-stressed, the strengthening effect was higher in comparison with pre-stressed single type FRP plate.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.5
• /
• pp.135-142
• /
• 2022

In this study, lap spliced ultra-high strength reinforced concrete beams were tested and the code criteria for calculating the lap splice length which was affected by the transverse reinforcement and concrete covering performance were reviewed. The main variables for test were set as fiber volume fraction and transverse reinforcing bar arrangement to improve the confining performance of the concrete cover. The change of the confining performance of concrete cover according to the increase in the fiber mixing amount at 1% and 2% volume ratio was examined, and D10 stirrups with a spacing of 100 mm were placed in the lap spliced region. As a result of the test, the specimens confined by the stirrups showed a sudden drop of load bearing capacity with horizontal cracking at the position of tensile longitudinal reinforcement. However, horizontal cracks were not appeared at the location of longitudinal reinforcement for the specimens with steel fiber. And these specimens showed gradual decrease of load bearing capacity after experiencing peak load. In particular, it was found that the strain at the position of the tensile longitudinal reinforcements of the specimens to which the mixing ratio of 2% was applied exceeds the yield strain. As a result of measuring the strain on the concrete surface, it was found that the fiber was more effective in preventing damage to the concrete surface than the stirrups for short lap spliced region.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.5
• /
• pp.29-38
• /
• 2021

Governments and companies are trying to reduce occupational accidents in the construction industry; however, the number of disasters are not decreasing significantly. This study aims to identify the correlation between factors affecting construction disasters quantitatively. To this end, 1,197 cases of serious disasters provided by Korea Occupational Safety and Health Administration (KOSHA) were analyzed using affinity analysis, one of the data mining techniques. The data from KOSHA were preprocessed and analyzed with variables of accident type, project type, activity type, original cause materials, sensory temperature, time of the accident, and fall height, and the association rules were derived for fall accidents and the others. For fall accidents, 64 association rules with lift ratios of 1.38 or greater were derived, and for the other accidents, 59 association rules with lift ratios of 1.54 or greater were derived. After analyzing the derived association rules focusing on the relationship among accident factors, this study presented the significance of applying the affinity analysis to address the study's limitations. The significance of this study can be found in that the correlation among factors affecting construction accidents is presented quantitatively.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.12-21
• /
• 2023

Green remodeling proposed in the Korean New Deal is a project to build or remodel eco-friendly and energy-efficient buildings using renewable energy facilities and high-performance insulation for public buildings. The government intends to achieve the carbon emission reduction target by conducting green remodeling. Major overseas cities that conduct green remodeling are actively promoting technology support and promotion along with energy performance evaluation according to building characteristics, subsidies for private revitalization, and tax benefits. With this background, the analysis of the current status and problems of the green remodeling project was performed and the Activation factors of Green Remodeling were derived from survey results. This study suggested strategic measures such as a participation of civil society, promotion, and priority selection of administration and policy measures such as a leading role of the public sector, expanding support for the socially underprivileged, and financial support and tax benefits. And this study results are expected to be utilized as basic data to promote the green remodeling project.

• Korean Journal of Environment and Ecology
• /
• v.11 no.1
• /
• pp.46-60
• /
• 1997

The purposes of this research are to select the appropriate kinds of landscape woody plants for afforestation artificial ground and to find out the way of developing planting-tree area of artificial ground through test planting and case study. The summary of the research is as follows; As a result of observing the state of trees' growth, trees on artificial grounds grow as well as, or even better than those on natural grounds. The kinds of trees which represent better growth states on artificial soil of rooftop test area are Thuja occidentalis, Prunus armericana var. ausu, Acer palmatum, Viburnum sargentii for. sterile, Buxus microphylla var. koreana, etc. In addition, soils than on natural soils. As a result of investigating the tree's growth state according to soil beds of artificial soils, shrubs don't represent distinct differences. They show that shrubs can be planted on 30cm soil bed. The rest of trees no differences according to the variation of soil beds, and they are in normal condition or have slight damage. This means that though arbor planting area of artificial ground is made 45~60cm, it is possible for trees to grow on it. In consequence of analyzing the cases on areas of landscaping artificial grounds, as the appropriate kinds of trees for afforestation artificial ground, Diospyros kaki, Hibiscus syriacus, Syringa dilatata, Magnolia kobus, Acer ginnala and cornus alba are selected in Capital region, and Nandina domestica, Taxus cuspidata, Ilex crenata, Viburnum awabuki, Aucuba japonica and Euonymus japonica are selected in southern region. In addition, Juniperus chinensis, Zelkova serrata, Juniperus chinensis var. kaizuka, etc. are selected regardless of regional character. In accordance with the state of soil it shows great difference, namely, fertilization once or more a year and irrigation for drought is advantageous to tree's growth. This research represents that it is necessary that standards related to landscaping artificial grounds are subdivided. In addition to it, the plan for revising related to regulation is drawn up.