• Title/Summary/Keyword: 도선(道詵)

Search Result 516, Processing Time 0.024 seconds

vicinal 표면위에 성장된 박막의 안정화 조건

  • 서지근;신영호;김재성;민항기
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 1999.07a
    • /
    • pp.189-189
    • /
    • 1999
  • 초미세 전자 소자에 대한 개발에 대한 요구는 최근 들어 원자 단위의 구조물 제작에 대한 연구로까지 나아 가게 하고 있다. 좋은 물리적 성장을 가지는 양자도선(quantum wire), quantum dot와 같은 nano 단위 구조물 제작에 대한 요구는 그 가능성의 하나로 , 기울어진 vicinal) 표면위에서의 박막 성장에 대한 연구로 이어지고 있다. 기울어진 표면은 한 원자층으로 된 많은 계단들을 가지고 있는 표면이고, 이러한 계단들의 존재는 박막 성장 시 흡착 원자가 계단 끝에 부착될 확률을 증가 시켜, stepflow 성장과 같은 준 층별 성장을 만들 가능성을 높여주며, sub-ML증착에 대해서 원자가 계단면을 따라 길게 늘어선 양자도선과 같은 성장이 가능한 표면이라는 점에서 관심을 갖게 한다. 그러나 최근의 연구들에 의하면 기울어진 표면 위에서의 성장도 Schwoebel 장벽과 같은 분산 장벽의 존재로 계단과 수직인 축 방향으로 거친 모양의 island가 형성되는 Bails-Zangwill 불안정성이 나타나는 것으로 보고되고 있고, 이것은 준 층별 성장이나 양자 도선과 같은 성장을 방해하는 것으로 알려져 있다. 이러한 불안정성을 해결할 가능성으로 최근 들어 한 계단의 높이가 큰 step bunching 이 생겨난 표면위에서의 성장이 제기 되고 있으나, 아직 확인되지 않았다. 본 연구는 이러한 기울어진 표면 위에서 박막을 성장 할 때 층흐름(step flow) 성장이 가능한 역학적 동역학적 조건을 구하고자 하며, 방법으로는 KMC 시뮬레이션을 이용한다. 단원자로 구성된 계단이 있는 기울어진 표면 위에서의 homoepitaxy의 경우, 성장 양식은 계단과 계단 사이의 테라스 간격에 크게 의존한다. 테라스 간격이 좁을수록 성장은 보다 층흐름 성장에 근접한다. 그러나 다층으로 성장시킨 시뮬레이션의 결과는 일반적인 장벽 조건 아래에서는 계단의 방향과 수직인 방향으로 평평한 면에서와 동일한 크기를 가지는 island가 성장하는 것을 볼 수 있고, 이 것은 Bails-Zangwill 불안정성이다. 그러나 계단 사이의 테라스 간격이 매우 좁은 경우 5-6ML 성장 이하에서는 층흐름 성장과 동일한 성장이 이루어지나 계단을 따라서 미소한 크기의 거칠기가 나타난다. 동일한 기울어진 경사면에 대해서는 분산속도가 좋을수록 보다 계단 면을 따라 보다 큰 크기의 island가 나타난다. 분산 장벽과 같이 동역학적인 요소만으로는 완벽한 층흐름 성장은 높은 온도, 극히 낮은 분산 장벽이라는 조건 이외에는 얻기 어렵다. 그리고 층흐름 성장의 가능성으로 제시된 step bunching 일 일어난 다층 높이의 계단을 가진 면도 다층의 수만큼 계단수를 늘려주는 것과 동일한 결과가 나타나며, 이 경우도 층흐름 성장에는 근접하지만 완전한 형태의 성장은 얻기는 역시 어렵다. 따라서 원자단위의 도선이나 층흐름 성장은 계단과 계단 사이의 인력 또는 척력과 같은 역학적인 요소를 고려할 때 만이 가능할 것으로 보인다.

  • PDF

Analysis of Electromagnetic Coupling to an Infinitly Long Wire through a Slot in an Infinite Conducting Plate (무한도선과 무한 도체평판에 있는 슬롯간의 전자기적 결합에 대한 해석)

  • Baek, W. S.;Lee, C. H.;Cho, U. H.;Cho, Y. K.;Son, H.
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.8 no.2
    • /
    • pp.137-150
    • /
    • 1997
  • The problem of electromagnetic coupling into a thin conducting wire through a slot in an infinite conducting is analyzed by use of MPIE(mixed potential integral equation) and two- dimensional moment method using subsectional(rooftop) basis functions. The equivalent circuit is derived using a center-repesentation method which is valid in a narrow slot case. The equi- valent magnetic currents on the slot and the induced currents on the wire are caculated respec- tively, for the TM wave is incident upon the slot with arbitrary angle of incidence. The theoretical transmission coefficients of transmission line which is composed of thin-wire and infinite conducting plate with a narrow slot are compared and found to be in good agreement with experimental results.

  • PDF

Conservation and Analysis of Inner Materials of a Stoneware Bottle from Incheon Ongjingun Yeongheungdo Shipwreck (인천 옹진군 영흥도선 출수 도기병의 보존처리와 내용물 분석)

  • Kim, Hyoyun;Kim, Seojin
    • Journal of Conservation Science
    • /
    • v.32 no.4
    • /
    • pp.449-457
    • /
    • 2016
  • A stoneware bottle was recovered from the Incheon Yeongheungdo Shipwreck in 2013. Primary observations showed that this object had a sealed opening and was covered with a foreign material. After it was cleaned via mechanical and chemical methods, wave patterns were observed on the outer surface of the bottle and a yellowish-brown transparent material was found within. In this paper, the process of conserving the stoneware bottle and the analysis conducted on the unknown material found within is explained. The conservation process included steps such as cleaning, desalination and restoration. After of the missing area located at the rim, the original shape of the bottle was made clear. In addition, the unknown inner material was analyzed using FT-IR and GC-MS. Results showed that the material is similar to golden lacquer. It is speculated that the Yeongheungdo Ship had wrecked during the Unified Silla period while carrying a bottle loaded with golden lacquer.

The Effects of Taekwondo Athletes' Sports Participation Motivation on Achievement Orientation and Achievement Behaviors (태권도선수의 참여동기와 성취목표지향성이 성취행동에 미치는 영향)

  • Lim, Young-Jin;Song, Eun-Seob
    • The Journal of the Korea Contents Association
    • /
    • v.19 no.2
    • /
    • pp.525-538
    • /
    • 2019
  • The objective of this study is to verify the effects of the Taekwondo athletes' sports participation motivation on the achievement orientation and achievement behaviors and to verify the mediating effect of the achievement orientation. The subjects of this study were 256 athletes' in Honam. The questionnaire data were utilized for verification of hypotheses through structural equation model analysis. As a result of verification, Taekwondo athletes' sports participation motivation presented a statistically significant positive correlation with their achievement orientation. The achievement orientation showed a significant positive effect on the achievement behaviors with the mediating effect of the achievement orientation. Finally, the result of this study is meaningful in a point of view of the effect of Taekwondo athletes' sports participation motivation on the achievement orientation and achievement behaviors. It is worthwhile to verify the mediation effect of achievement orientation.

A Buffer Insertion Method for RLC Interconnects (RLC 연결선의 버퍼 삽입 방법)

  • 김보겸;김승용;김석윤
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.2
    • /
    • pp.67-75
    • /
    • 2004
  • This paper presents a buffer insertion method for RLC-class interconnect structured as a sin91e line or a tree. First, a closed form expression for the interconnect delay of a CMOS buffer driving single RLC line is represented. This expression has been derived by the n-th power law for deep submicrometer technology and occurs to be within 9 percentage of maximal relative error in accuracy compared with the results of HSPICE simulation for various RLC loads. This paper proposes a closed form expression based on this for the buffer insertion of single RLC lines and the buffer sizing algorithms for RLC tree interconnects to optimize path delays. The proposed buffer insertion algorithms are applied to insert buffers for several interconnect trees with a 0.25${\mu}{\textrm}{m}$ CMOS technology and the results are compared against those of HSPICE.

Texture Analysis of Cu Interconnects Using X-ray Microdiffraction (X-ray Microdiffraction 을 이용한 구리 Interconnect의 Texture 분석)

  • 정진석
    • Korean Journal of Crystallography
    • /
    • v.12 no.4
    • /
    • pp.233-238
    • /
    • 2001
  • X-ray microdiffraction which uses x-ray beam focused down to a micron size from synchrotron radiation sources allow precision measurements of local orientation and strain variations in polycrystalline materials. Using x-ray microdiffraction setup at Pohang Light Source, we investigated the tex-ture of Cu interconnects with various widths on Si wafer by collecting Laue images and focused to about 2×3㎛ ² in size. Our results show that 1㎛ wide Cu interconnect had grains in rather ran- dom orientation. On the other hand the 20㎛ wide interconnects showed a 〈111〉fiber texture near the center. The grains were 2∼5㎛ long at the 1㎛ wide interconnect and 6∼8㎛ in size at the 20㎛ wide interconnect.

  • PDF