• Parasites, Hosts and Diseases
• /
• v.31 no.4
• /
• pp.375-378
• /
• 1993

The prevalence of Intestinal parasite Infections In Inhabitants at the reaches of the Hantan River, Chorwon-gun, Korea, was observed from August 12 to September 14, 1993. Of 465 people observed by cellophane thick smear and formalin-ether concentration method, 2 Ascots lumbricoides (unfertilized), 1 Trichwis Dichturn, 39 Clonorchis sinensis and 16 Metagonimus egg positive cases were found. After treatment, the Metogonimus egg positive cases passed out flukes of Metogonimus Mlyata type. Of 68 fish caught In the Hantan River, 14 (20.6%) were Infected with metacercanae of Metogontmn, while no metacercana of C. sinenis was found. At this area, soul-transmitted nematodes are very low, but clonorchlasis and metagonlmlasis are prevalent by modernate endemicity.

• Journal of the Korean housing association
• /
• v.24 no.1
• /
• pp.79-87
• /
• 2013

The purpose of the study is to verify the effect of the Domus type on the modern housing-typology. This article specifies conceptual architectural typology through studying housing types and the changes by comparing experimental results over time since the ancient to the modern times. To successfully establish the purpose of this article, I cited Saussure's verbal methodology of system and representation along with Deleuze's philosophical cause of differentiation and repetition. Also adopting Aldo Rossi's architectural theory of typology, I established theory of housing continuation and alteration. I will compare and analyze particularly the Domus type, Adolf Loos's M$\ddot{u}$ller house, Luis Barragan's house, Le Corbusier's Villa Sovoye, and Mies van der Rohe's Three court house. And I research on the difference between architectural representation of hall and courtyard in modern housing. This research looks to emphasize historical comprehension and practical application of architectural history through housing studies.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.186-191
• /
• 2019

In this paper, we propose a implementation approach of the high-speed feature extraction algorithm. The proposed method is based on the block type classification algorithm which reduces the computation time when target macro block is divided to smooth block type that has no image features. It is quantitatively identified that occurs at 29.5% of the total image using 200 standard test images with $64{\times}64$ macro block size. This means that within a standard test image containing various image information, 29.5% can reduce the complexity of the operation. When the proposed approach is applied to the Canny edge detection, the required latency of the edge detection can be completely eliminated, such as 2D derivative filter, gradient magnitude/direction computation, non-maximal suppression, adaptive threshold calculation, hysteresis thresholding. Also, it is expected that operation time of the feature detection can be reduced by applying block type classification algorithm to various feature extraction algorithms in this way.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.367-373
• /
• 2006

We have observed a large increase in the magnetoresistance (MR) of Bi thin films, which were subjected to a post-annealing procedure at $268^{\circ}C$C, $3^{\circ}C$ below the Bi melting point. We have achieved an increase in the MR by 260-fold and 1200-fold at 5 K and 5 T after post-annealing, as compared with 190 and 620 for an as-deposited Bi film on PbTe/CdTe(111) and on mica, respectively. The large MR increase by post-annealing might be due to the improvement of crystallinity according to the x-ray analysis. However, post-annealing over a certain amount time showed the reduction in MR values.

• Korean Journal of Remote Sensing
• /
• v.34 no.3
• /
• pp.495-506
• /
• 2018

Global interest in climate change and sea level rise has led to active research on the velocities of glaciers. In studies about the velocity of glaciers, in-situ measurements can obtain the most accurate data but have limitations to acquire periodical or long-term data. Offset tracking using SAR is actively being used as an alternative of in-situ measurements. Offset tracking has a limitation in that the accuracy of observation is lower than that of other observational techniques, but it has been improved by recent studies. Recent studies in the $Uv{\hat{e}}rsbreen$ glacier area have shown that glacier altitudes decrease at a rate of 1.5 m/year. The glacier displacement velocities in this region are heavily influenced by climate change and can be important in monitoring and forecasting long-term climate change. However, there are few concrete examples of research in this area. In this study, we applied the improved offset tracking method to observe the two-dimensional velocity in the $Uv{\hat{e}}rsbreen$ glacier. As a result, it was confirmed that the glacier moved at a maximum rate of 133.7 m/year. The measruement precisions for azimuth and line-of-sight directions were 5.4 and 3.3 m/year respectively. These results will be utilized to study long-term changes in elevation of glaciers and to study environmental impacts due to climate change.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.