• Water for future
• /
• v.10 no.1
• /
• pp.39-51
• /
• 1977

The purpose of this study is to make "The Rainfall Frequency Atlas in Korea" by the analytical method with new hydrological concepts. In this study, all of the rainfall datas in Korea was used for surveying of the basic data, and so we can get 103 sites for annual rainfall data and 100 sites for the max. in a day that are suitable to the purpose of the study. The above data groups are possible to estimate the normal standard period by the moving average method with $\pm$5% of significance level of variance ratio between the max. and min. moving average and arithmetic mean, but it may be impossible to study until 1990's for the short duration under 18-hr because the sites, having the short duration data, are only 12. The results of this study are as follows; 1. The normal standard period estimated by the moving average method is 20 year with $\pm$5% of significance level of variance ratio, and 30 year with$\pm$2-3%. 2. For the annual and max. rainfall in a day, it is possible to make the rainfall frequency atlas with 30normal standard period, but it may be impossible until 1990's for short duration. 3. "Y-k method" developed by writer is best suitable in the rainfal frequency analysis in Korea because of its convenience and reduction in the amount of calculation compared with other methods. 4. To improve the utilization of the rainfall frequency atlas, the larger-sized and the more detailed iso-precipitation atlas must be drawn.atlas must be drawn.

• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.313-318
• /
• 2010

Deinococcus radiodurans RecA protein, when bound to DNA, exhibits a DNA-dependent ATPase. In the absence of DNA, the rate of RecA protein-promoted ATP hydrolysis drops 1,000-fold under the physiological concentrations of salt. This DNA-independent activity can be stimulated to levels approximating those observed with DNA by adding high concentrations (approximately 1.6 M) of a wide variety of salts. This effect was characterized by varying salt concentration and comparing the effects of different ion types. The higher concentrations of salt stimulated the ATP hydrolysis by RecA protein in the absence of DNA. At 1.6 M chloride, the observed stimulation showed the following cation trend $K^+{\geq}Na^+$ > $NH_4^+$ and the following anion sequence was observed: $glutamate^- \; > \; C1^- \;> \; acetate^-\; > \;PO_4^-$ at 1.6 M $K^+$. The catalytic properties of the salt-stimulated ATP hydrolysis reaction was optimal between pH 7.0 and 8.0, which was similar to the double stran nded DNA-dependent ATPase activities of Deinococcus radiodurans RecA protein. In the absence of DNA the active species for ATP hydrolysis by RecA protein was shown to be an aggregate of three RecA protein molecules.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.171-181
• /
• 2020

Recently, free-formed construction technology is becoming a new measure of representing technological superiority and sociocultural ingenuity. However, the CNC processing technology utilizing the existing wood and iron form has limitations in terms of the manufacturing time and material cost. Therefore, in this study, the method and process of manufacturing free-formed EPS form using S-LOM-based 3D printing technology were suggested. Furthermore, through the mock-up test, a comparative analysis of the manufacturing time and precision with CNC milling technology was conducted. The results show that S-LOM-based 3D printing technology has reduced manufacturing time about 57.4% compared to CNC milling technology during the free-formed EPS form manufacturing process. In addition, compared to the design drawings, the maximum error value was 20.5mm, proving the applicability of S-LOM-based 3D printing technology. The results of this study are expected to contribute to the improvement of S-LOM method and the activation of S-LOM method by verifying the applicability of S-LOM-based 3D printing technology.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.120-131
• /
• 2014

Sajikdan(a sort of national shrine in Korea) built at the time of foundation of Joseon was entrenched into Sajik Park going through Japanese colonial era and recently the efforts to restore it is in progress. The details of change in Sajikdan in terms of diachronic analysis are as follows: Firstly, the first period refers to one prior to Japanese colonial era from the first king (also named as "Taejo" in Korean) of the Joseon Dynasty, during which it secured and strengthened the presence as a place for performing important national rites in a nation. It was built on the foot of Inwangsan Mt. at the time of the first king in Joseon Dynasty at first, was destroyed fully by fire during a Japanese Invasion period to Korea(1592-98) and afterward its ancestral ritual facilities were completed under the regime of Youngjo. However, as Japanese intervention coming to the fore, its place was destroyed and then ancestral rites were also abolished in 1908. Secondly, next period falls on 1910 to 1944 when it was transformed and entrenched into a park by the Japanese Empire. While facilities related to a park and an heterogeneous building around the part of boundary were set up, the area of altar, a ritual house and d door of Sajikdan were also designated as historical remains and treasures. Thirdly, this period refers to one from Korea's liberation year from Japanese colony(1945) to the year of 1984 when it had a mixed placeness with the statues, monuments and buildings with heterogeneous nature built. Furthermore, a door of Sajikdan was removed and reconstructed over twice due to opening of Sajik Tunnel. Fourthly, a final period falls on 1985 to the present when efforts are in progress to restore the historicity and symbolism of Sajikdan. A plan for restoration is promoted but now is a difficult time suffering from troubles caused by residents' resistance. Scrutinized historical researches through excavation investigation and residents' understanding are required altogether for restoration of Sajikdan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.271-279
• /
• 2019

In extreme environment regions, unmanned rovers equipped with various sensors and devices are being developed for long-term exploration on behalf of humans. On the other hand, due to the harsh weather conditions and rough terrain, the rover camera has limited visible distance and field of view. Therefore, the rover cameras should be located for safe navigation and efficient terrain mapping. In this regard, to minimize the cost and time to manufacture the camera system on a rover, the simulation method using the rover design is presented to optimize the camera locations on the rover efficiently. In the simulation, a simulated terrain was taken from cameras with different locations and angles. The visible distance and overlapped extent of camera images, and terrain data accuracy calculated from the simulation were compared to determine the optimal locations of the rover's cameras. The simulated results will be used to manufacture a rover and camera system. In addition, self and system calibrations will be conducted to calculate the accurate position of the camera system on the rover.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.328-334
• /
• 2020

At the recent practice test of the Remote Controlled Munition system (for practice), nine out of 125 samples were generated. Although 7.2 % misfires occurred, the acceptance test met the defense standards. Minimizing the probability of broken fuses is essential to reducing the number of samples and improving the AQL according to the process quality. In addition, it is necessary to increase military training and ensure user safety. In the case of practical grenades, hit-type detonators are applied. Unlike the normal design, which takes a hit by strikers, a different design of a hit by pressure from a pressure generator was used. This study analyzed the detonator surface through computational fluid dynamics. The results showed that the probability of functional weakness and retraction increased with increasing slope of the detonator surface. To overcome this, design changes were made to improve the fuse crimping process and increase the detonator holder seat. A performance test with the same number of samples from the whole quantity was operated. The probability of broken fuses was 0 %. Therefore, the reliability and performance of the ammunition can be improved and is expected to contribute to the drawing and process design when developing similar ammunition.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.93-107
• /
• 2008

Recently, there have been many projects regarding restoration of streams to recover their environmental and ecological functions. For the restoration of streams, it is valuable academically and economically to evaluate the ecological condition of streams and build a plan and an object for restoring streams based on that. On the other hand, one of the methods to figure out the ecological condition of streams is to evaluate the hydromorphological structure of stream. In this study we have developed a field survey system using the stream assessment methode of LAWA (Laenderarbeitsgemeinschaft Wasser in Germany) that can assess the hydromorphological structure of small and medium streams. In addition, we constructed a GIS-based stream assesment system which can support auto mapping system and report writing, using the survey results. These systems are aimed to help people in the area of restoring streams perceive the natural and ecological condition of streams in the process of making plans and managing the projects, and they also try to help in collecting raw data to determine an ideal potential model to which an existing stream should be turned.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.273-282
• /
• 2009

To render more valuable information, a spatial database is being constructed from digitalized maps in the geographic areas. Transferring file-based maps into a spatial database, facilitates the integration of larger databases and information retrieval using database functions. Geological mapping is the graphical interpretation results of the geological phenomenon by geological surveyors, which is different from other thematic maps produced quantitatively. These features make it difficult to construct geologic databases needing geologic interpretation about various meanings. For those reasons, several organizations in the USA and Australia are suggesting the data model for the database construction. But, it is hard to adapt to a domestic environment because of the representation differences of geological phenomenon. This paper suggests the data model adaptive in domestic environment analyzing 1:50,000 scales of geologic maps and more detailed mine geologic maps. The suggested model is a logical data model for the ArcGIS GeoDatabase. Using the model it can be efficiently applicable in the 1:50,000 scales of geological maps. It is expected that the geologic data model suggested in this paper can be used for integrated use and efficient management of geologic maps.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2013

The objectives of this study were to develop porridge with medicinal herbs and chicken breast meat and to find out the optimum mixing ratio. Several herb extracts such as Acanthopanacis senticosus, Rehmannia glutinosa, Disocorea japonica, and Poria cocos Wolf were used in the ratio of 2, 1, 1, and 1, respectively. The optimum processing condition for herbal chicken porridge was determined by a design expert program. Seventeen experimental points were selected, and herb extracts (82~101 g), chicken breast meat (30~50 g), and glutinous rice (40~60 g) were chosen as the independent variables. The measured responses were preference of taste, DPPH radical scavenging, SOD-like activity, and cost. The optimum formulation of herbal chicken porridge using the numerical analysis was set at herbal extracts (101 g), chicken breast meat (38.66 g), and glutinous rice (41.34 g) with a 0.714 desirability value. DPPH radical scavenging effect, preference of taste and the cost showed a linear model, whereas SOD-like activity showed a quadratic model indicating a higher interaction among the mixture. As a result of proximate composition of optimized herbal chicken porridge, the contents of moisture, carbohydrate, crude protein, crude lipid, and ash contents were 76.4, 9.0, 1.4, 0.5, and 1.6%, the calories of the porridge was 46.1 kcal/100 g.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.123-134
• /
• 2019

The introduction of the world geodetic reference system in cadastral sector can apply the international standardization of cadastral survey and can be the basis for the creation of new industries by merging with other industries based on spatial information. With the introduction of the world geodetic reference system, non-coincidence land may cause problems which are whether the cadastral record and the real estate register are not consistent, etc. This problem infringes on the protection of ownership of citizens suggested in the main purpose of ｢Act On The Establishment, Management, Etc. Of Spatial Data｣. We have analyzed at overlapping cases between private land and overlapping cases between national and public land and suggested institutional improvement measures to solve problems arising on the site. As a result, it will be necessary to introduce a transformation verification measure by the world geodetic reference system in order to assign a function as a cadastral records to mapping converted to the world geodetic reference system. It is also expected that the legal and institutional basis should be established for alert adjustment and positioning through verification measures. Finally, it is difficult to determine the transformation factor as the co-ordinates of common points also differ because survey results vary by work area. Therefore, it is deemed necessary to consider the requirement to use the cadastral measurement basis by the world geodetic reference system in 2021.