• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.1
• /
• pp.97-104
• /
• 2016

In Korea, the number of crash accident victims per 100,000 population is three times higher than the average of OECD. In particular, 60% of it occurs on the community road. Thus, this study intends to analyze the causes of such accidents through a pedestrian and vehicle traffic survey. The purpose is to establish practical safety enhancement measures for community roads. In recent years, lots of changes have occurred in the pedestrian environment. A traffic survey shows that 65% of pedestrians walk on the right and 17% of people use smart-phones while walking. An eye camera experiment shows that the operation load of drivers on the community roads is more than 4 times higher than those in urban roads. According to a speed survey, 62% of vehicles drive at 30km/h or above. The characteristics of accidents on community roads are as follows. First, the ratio of accidents on the edge of the road is 2.3 times as high as those on other roads. Second, when people walk on the right, the ratio of accidents is 2.5 times as high as that of walking on the left. Third, it becomes more dangerous when people cross the road from the right to the left. The majority of accidents is caused by unsafe driving (84.4%). When a vehicle makes a left turn, the likelihood of accidents is 2.3 times as high as those caused by a right turn. The ratio of accidents caused by vehicles going backwards is 14% among all accidents. In community roads, the focus of drivers should be at least 4 times higher than those on urban roads. Thus, walking in the opposite direction of vehicles and careless behaviors are highly likely lead to accidents.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.323-328
• /
• 2002

Soil-steel structures have been used for the underpass, or drainage systems in the road embankment. This type of structures sustain external load using the correlations with the steel wall and engineered backfill materials. Buried flexible conduits made of corrugated steel plates for the coastal road was tested under vehicle loading to investigate the effects of live load. Testing conduits was a circular structure with a diameter of 6.25m. Live-load tests were conducted on two sections, one of which an attempt was made to reinforce the soil cover with the two layers of geo-gird. Hoop fiber strains of corrugated plate, normal earth pressures exerted outside the structure, and deformations of structure were instrumented during the tests. This paper describes the measured static and dynamic load responses of structure. Wall thrust by vehicle loads increased mainly at the crown and shoulder part of the conduit. However additional bending moment by vehicle loads was neglectable. The effectiveness of geogrid-reinforced soil cover on reducing hoop thrust is also discussed based on the measurements in two sections of the structure. The maximum thrusts at the section with geogrid-reinforced soil cover was 85-92% of those with un-reinforced soil cover in the static load tests of the circular structure; this confirms the beneficial effect of soil cover reinforcement on reducing the hoop thrust. However, it was revealed that the two layers of geogrid had no effect on reducing the overburden pressure at the crown level of structure. The obtained values of DLA decrease approximately in proportion to the increase in soil cover from 0.9m to 1.5m. These values are about 1.2-1.4 times higher than those specified in CHBDC.

• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.133-144
• /
• 2004

A model and a measure which can evaluate the risk of rear end collision are developed. Most traffic accidents involve multiple causes such as the human factor, the vehicle factor, and the highway element at any given time. Thus, these factors should be considered in analyzing the risk of an accident and in developing safety models. Although most risky situations and accidents on the roads result from the poor response of a driver to various stimuli, many researchers have modeled the risk or accident by analyzing only the stimuli without considering the response of a driver. Hence, the reliabilities of those models turned out to be low. Thus in developing the model behaviors of a driver, such as reaction time and deceleration rate, are considered. In the past, most studies tried to analyze the relationships between a risk and an accident directly but they, due to the difficulty of finding out the directional relationships between these factors, developed a model by considering these factors, developed a model by considering indirect factors such as volume, speed, etc. However, if the relationships between risk and accidents are looked into in detail, it can be seen that they are linked by the behaviors of a driver, and depending on drivers the risk as it is on the road-vehicle system may be ignored or call drivers' attention. Therefore, an accident depends on how a driver handles risk, so that the more related risk to and accident occurrence is not the risk itself but the risk responded by a driver. Thus, in this study, the behaviors of a driver are considered in the model and to reflect these behaviors three concepts related to accidents are introduced. And safe stopping distance and accident occurrence probability were used for better understanding and for more reliable modeling of the risk. The index which can represent the risk is also developed based on measures used in evaluating noise level, and for the risk comparison between various situations, the equivalent risk level, considering the intensity and duration time, is developed by means of the weighted average. Validation is performed with field surveys on the expressway of Seoul, and the test vehicle was made to collect the traffic flow data, such as deceleration rate, speed and spacing. Based on this data, the risk by section, lane and traffic flow conditions are evaluated and compared with the accident data and traffic conditions. The evaluated risk level corresponds closely to the patterns of actual traffic conditions and counts of accident. The model and the method developed in this study can be applied to various fields, such as safety test of traffic flow, establishment of operation & management strategy for reliable traffic flow, and the safety test for the control algorithm in the advanced safety vehicles and many others.

• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.67-74
• /
• 2014

Recently, the number of road construction is increasing by industrial development. According to this industrial tendency, the number of traffic accidents are consistently increasing due to increasing number of vehicle on the road. This is mainly because traffic accidents are occurred by various parameter such as negligence of driver, vehicle defects, state of unstable road, natural environment etc. Lane department of vehicles from guardrail is occurring frequently. This type of accident is caused by vehicle performance improvement and shape of vehicle, weak guardrail installation and maintenance. Guardrail has the purpose on prevention such as prevention of traffic accident and prevention of deviating out of road, minimizing damage of driver and vehicle by collision as well as entry into the road through guardrail. Stability evaluation test of guardrail verifies the behavior of guardrail through the crash of truck. At this time, the crash condition has 100 km/h of velocity and $15^{\circ}$ of impact angle. In the case of ground condition, filling slope condition has relatively high bearing capacity of infinite ground towards the test. Guardrail is generally installed on road of shoulder in fill slope in korea. It is possible for stability problem to deteriorate ground bearing capacity in Guardrail in fill slope. The existed study towards stability of guardrail has been carried out in the infinite ground. However, the study on the behavior of fill slope with guardrail is not performed by vehicle collision. Therefore, In this study, the numerical analysis using LS-DYNA was executed for verification on behavior of fill slope with guardrail through vehicle collision. This numerical analysis was carried out with change of embedded depth on installed guardrail post in shoulder of fill slope by vehicle collision and 8 tonf truck crash providing at NCAN (National Crash Analysis Center). As the result, displacement and stress on fill slope are decreased in accordance with the increase of embedded depth of guardrail post. Ground bearing capacity is deteriorated at depth of 450 mm form shoulder of road on fill slope.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.6 s.73
• /
• pp.725-736
• /
• 2004

A new type of girder, called steel-confined prestressed concrete girder (SCP girder), has been developed, which maximizes the structural advantages of concrete, steel, and PS tendon, and improves on the shortcomings of steel plate girder, PSC I-girder, and preflex girder bridge for use in the construction of middle- or long-span bridges. To verify the propriety of design, structural safety, and applicability of this girder, a static load test was carried out (Kim et al.., 2002). Since the main damage typically sustained by steel bridges results from the fatigue caused by the repetition of traffic loads, fatigue safety must therefore be guaranteed in applying the SCP girder in the construction of real bridges. In this study, a fatigue test was carried out to investigate fatigue behavior and provide basic data for fatigue design. Based on the fatigue test, the fatigue safety of the girder was estimated. For the fatigue test, 10-m specimens were designed for a standard-design truckload (DB-24). A static load test was also performed before the fatigue test to analyze the structural behavior of the specimens. After the fatigue test, outer steel plates were removed to observe the condition of the concrete in the girder.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.1-12
• /
• 2015

Length and the number of tunnels has increased 10% annually. Tunnel construction has positive effect in nature and driving condition. However, the structure of tunnels lead to a greater probability of major accidents. For this reason, tunnel is focusing its attention on the rapid incident handling and disaster management to build a tunnel management system in recently. In this study, tunnel management system adequacy analyzed in terms of operational safety using IPA and AHP analysis. IPA analysis results using the portfolio chart, incident management factors has a large gap between important and satisfaction. Disaster management is analyzed high ranking in priority. However, incident management factors are derived first priority in AHP analysis. This study determined that the results are meaningful to practitioners in the field is determined. In addition, practitioners comments should be reflected primarily for tunnel operational safely.

• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.29-58
• /
• 1996

현재 서울은 교통사고문제, 교통혼잡문제와 자동차로부터 배출되는 유해가스에 의한 대기환경오염문제를 갖고 있다. 본 논문의 목적은 대기환경오염을 악화시키는 자동차의 주된 배출오염가스인 일산화탄소, 탄화수소 및 질소화합물량을 교차로 교통량을 중심으로 어떻게 계산하는가에 있다. 연구의 대상지역은 서울시의 송파구 교차로들과 도심지역의 링크들을 선택하였다. 그리고 교통량, 지체시간, 링크길이, 정지회수, 운행속도, 주행속도 등을 고려하여, 제작차 배출가스 허용기준, 총량기준, 불량차 기준, 속도기준 등에 의한 계수산정 및 TRAF-NETSIM에 의한 시뮬레이션을 통하여 일정 도로상의 제한된 범위내의 배출량 산출을 시도하였다. 본 연구의 결과에 의하면 첫째, 어느 방법이든 실제배출량의 정확한 값을 표현 할 수는 없는 것이고, 단지 상대적인 비교에 의하면 배출가스량의 수준을 추정 할 수 있었다. 또한, 시뮬레이션 배출율표를 우리 현실에 맞는 자료에 의해 수정할 수 있다면, 그 결과는 실제량에 보다 근접할 수 있을 것이다. 둘째, 서울도로의 현재 혼잡상태에서 속도의 저감에 배출량이 민감한 반응을 보이고 있다는 사실이다. 셋째, 교통량변화에 따른 배출량의 변화가 일산화탄소에서 가장 심하게 나타남을 알 수 있었고, 신호운영상의 옵셋값이 잘못 설정되면 탄화수소는 35%, 일산화탄소는 40%, 질소산화물은 75%까지 초과발생할 수 있으며, 유해배출가스량을 최소화시키는 측면에서의 신호최적화를 위해서는 현재의 Stop Penalty는 상향 조정되어야 함이 밝혀졌다. 앞으로는 자동차로 인한 대기환경오염 농도의 저감을 위해서는 도로별 자동차 유해가스 배출 총량규제 방안도 고려해 볼 가치가 있으며, 이를 위해 환경공학과 교통공학의 다학제적 공동연구가 지속적으로 필요하며 교통정책에 반영되어야 할 것이다.분석, 리용수 학모형대이십일세기상해항공운량진행예측, 제출발전상해항공운수적전 략목표급발전중점. 예측2020년 상해항공항총객운탄토량4300만인/년, 화운량달120만돈; 2050년객운량장달18150만인차/년, 화운량518만돈. 사, 발전상해민항기출경제정책, 제출위료$\ll$진흥상해, 개발포동, 복무전국, 면향세계$\gg$ 화도이십일세기중기국민경제달도중등발달국가수 평굉관전략목표적실현, 제료필수재지도사상상파교통운수진정방도전략 산업지위, 환응재관리체제상채취과단유효적개혁조시, 재기출경제정책 상급여대력부지. 오, 전략목표, 위파상해건설성위태평양서안최대적경제, 김융, 무역적중심, 요구상해항공항성위화동지구통향세계각지항선망출발참, 구성대외개방선면축심, 실현국제항선적함접화국내항반적전항, 형성다축심복사식항선망; 가강기장건설, 개피포동제이국제기장건설, 괄응포동개발경제발전적수요. 부화개시일은 각 5월 26일과 5월 22일이었다. 11. 6월 중순에 애벌레를 대상으로 처리한 Phenthoate EC가 96.38%의 방제가로 약효가 가장 우수하였고 3월중순 및 4월중순 월동후 암컷을 대상으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase i

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.9 no.1
• /
• pp.58-64
• /
• 2010

Purpose: Bicycle riding is an increasingly popular sports and leisure activity in Korea. The aim of this study was to identify injury patterns of admitted patients who were injured from bicycle riding. Materials and Methods: This study examined 71 patients from Jan. 2008 to May 2009. There were 54 male and 17 female patients. We investigated the injured body parts, mechanisms of injury, location of injury, types of bicycles, purpose of bicycle riding, any concomitant luggage or passenger on rear seat, injury seasons and the helmet use. We analyzed the data using Injury Severity Score(ISS). Results: There were 11 cases of ISS 1, 41 cases of ISS 4, 2 cases of ISS 5, 13 cases of ISS 9, one case of ISS 13, two cases of ISS 16 and one case of ISS 29 among the 71 patients. 36 patients(50.7%) underwent surgery for upper and lower extremity injuries, two patients for vertebral body fractures, 8 patients for facial bone injuries and one patient for abdominal organ injury. There were 10 head injuries among whom three patients received treatment in ICU(4.2%). Conclusion: Bicycle riding can cause severe injuries with subsequent admission and major surgeries. Several measures including constructing more bicycle road, public campaign and wearing protective gears should be instituted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.18-25
• /
• 2020

With the development of water internet technology, data communication between objects is expanding. Research related to data communication technology between vehicles that incorporates related technologies into vehicles has been actively conducted. For data communication between mobile terminals, data stability, reliability, and real-time performance must be guaranteed. The 5 GHz Wi-Fi band, which is advantageous in bandwidth, communications speed, and wireless saturation of the wireless network, was selected as the data communications network between vehicles. This study analyzes how to design and implement a 5 GHz Wi-Fi network in a vehicle network. Considering the characteristics of the mobile communication terminal device, a continuous variable communications structure is proposed to enable high-speed data switching. We simplify the access point access procedure to reduce the latency between wireless terminals. By limiting the Transmission Control Protocol Internet Protocol (TCP/IP)-based Dynamic Host Configuration Protocol (DHCP) server function and implementing it in a broadcast transmission protocol method, communication delay between terminal devices is improved. Compared to the general commercial Wi-Fi communication method, the connection operation and response speed have been improved by five seconds or more. Utilizing this method can be applied to various types of event data communication between vehicles. It can also be extended to wireless data-based intelligent road networks and systems for autonomous driving.