• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.175-182
• /
• 2021

As road noise became an issue, low-noise pavement (LNP) has emerged. The noise difference from general asphalt pavement (GAP) is a measure to explain the noise reduction of LNP. On the other hand, even for GAP, noise varies with the performance years (PY) and pavement condition. This study evaluated the representative noise value (RNV) by the speed and PY of GAP. Sections of 49selected from the National Road Pavement Management System, and the noise was measured at speeds from 50km/h to 80km/h at every 10km/h using the Close Proximity Method (CPX). Because the noise immediately after construction differed from the other, it was treated separately, and some outliers were removed. The noise increased with increasing PY. In addition, the noise increase by speed showed a reliable trend at all noise levels. The RNV for each speed and PY was obtained through analyses of the PY and speed. The average noise difference between the initial construction and the six-year-paced pavement was approximately 6dB. When evaluating the noise reduction of LNP, it is necessary to use RNV rather than the noise of old pavement. The RNV of GAP is necessary for a relative comparison with LNP and studying the road noise characteristics for each GAP type.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.714-723
• /
• 2020

This study was conducted to investigate the community stability and similarity of benthic macroinvertebrates in the Giran stream between August and September 2018, and compare results to those reported by Lee (2004). As relates to the total number of species in each taxon in 2018, 45 species were additionally discovered compared to the 2003 study; the number of EPT taxa increased by 14 species and OCH taxa increased by 18 species. The diversity and richness indexes increased while the dominance index tended to decrease. According to analysis of functional feeding groups, 11 more Gathering-collector species were found, making it the highest functional feeding group with 24 species. According to analysis of functional habitat groups, 15 more clinger species were found than in the past, making it the highest functional habitat group with 41 species. A community stability comparison showed that species belonging to 'Stability Group I' had the highest stability rate at 57.1% in 2003 and 61.5% in 2018. According to the biological water quality assessment, in 2018, the average water quality level at each survey site was 'Ia' and 'Very Good' in terms of environmental conditions. As a result of the similarity analysis between the survey points for the species that appeared, two large groups of similarities were classified (similarity group 1: 2003 sites, similarity group 2: 2018 sites).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.617-626
• /
• 2022

In Korea, annual precipitation and its variability have gradually increased since modern meteorological observations began, and the risk of disasters has also been increasing due to significant regional variations and recent abnormal climate conditions. Given that damage from storms and floods mainly occurs around rivers, it is crucial to determine the appropriate design frequency for river-related projects. This study examined existing design practices used to determine hydrological design frequencies and suggested a new method to determine appropriate design frequencies. The study collected available data pertaining to seven evaluation factors, specifically the basin areas, shape parameters, channel slopes, stream orders, backwater effect reaches, extreme rainfall frequencies, and urbanized flood inundation areasfor 413 local rivers in Chungcheongnam-do in Korea. The estimated weights for areas of extreme rainfall frequencies and urbanized flood inundation were found to be 18, having a great effect on determining the design frequency. Compared with the established design frequency in previous government reports, the estimated design frequency increased for 255 rivers and decreased for 158 rivers.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.526-534
• /
• 2022

In August 2014, the Ministry of Land, Infrastructure, and Transport (MOLIT) devised an innovative ITS measure in which private and public sectors share roles to maximize investment efficiency and effectiveness in collecting and offering traffic information that had been separately implemented by the state and private sector. The main details of the innovative measure include the following: For communication information, the information collected by the private sector is used, and the state concentrates on safety-related information collection, such as unexpected situations, including construction, accidents, and deteriorating weather conditions. Consequently, safety-related information is offered in real-time through smartphones and navigation, in addition to electric road signs that have limitations in providing unexpected real-time situations due to installation at specific spots. This study presented a connected traffic information priority coordination plan to improve the accuracy of traffic information offering by analyzing problems of related traffic information, including a general national highway case study to enhance the efficiency of national highway ITS implementation, according to actual public-private traffic information sharing. In addition, this study reviewed whether to operate or demolish the information collection equipment by analyzing traffic volume level and availability of related traffic information in the existing ITS operation sections and presented ITS collection equipment installation judgment standards based on the cases concerned.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.87-96
• /
• 2023

There are a lot of difference between the surface settlement and the differential settlement measured at the Busan New Port, where the dredged and reclaimed clay layer exists and below the clay is originally thickly distributed. To find the cause and solution of this, the actual conditions of each differential settlement used for the soft ground improvement, characteristics, installation method, measurement frequency, measurement data management, and data analysis of each type were considered. In the deep soft ground improvement work where large deformation occurs, the bending deformation of the screw-type differential settlement gauge is less than that of other types of measuring instruments, so there is less risk of loss, and the reliability of data is relatively high as the instruments are installed by drilling for each stratum. Since the greater the amount of high-precision settlement measurement data, the higher the settlement analysis precision. It is necessary to manage with higher criteria than the measurement frequency suggested in the standard specification. For the data management of the differential settlement gauge, it is desirable to create graphs of the settlement and embankment height of the relevant section over time, such as surface, differential, and settlement of pore water pressure gauge for each point. In the case of multi-layered ground with different compression characteristics, it is more appropriate to perform settlement analysis by calculating the consolidation characteristics of each stratum using a differential settlement data.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.54-69
• /
• 2000

There are groundwater trouble by high-salinity yield inducing sea-water intrusion in Cheju Island. It is used groundwater-GIS(Well-lnfo) in the maintenance and management of groundwater in Cheju Island to grasp groundwater trouble area and cause of high-salinity yield. For 16 wells certain to yield high-salinity, we logged specific electrical conductivity(EC) and tried to get hold of freshwater and saltwater relationship. As result of distribution of $Cl^-$ by depth, it is showed up groundwater trouble by high-salinity yield in the east coastal area and the partly north coastal area. The reason of high-salinity groundwater yield are low-groundwater level by the structure of geology and low-hydraulic gradient etc. There is necessity for management to development and use of groundwater in the high-salinity area, special management area.

• Korean Journal of Environment and Ecology
• /
• v.37 no.2
• /
• pp.151-162
• /
• 2023

This study investigated the characteristics of fish communities and inhabiting status of the endangered species, Rhodeus pseudosericeus, in the Geumdang Stream in Korea from March to October 2021. A total of 1,698 fish in 5 families and 25 species were collected from 7 survey stations during the survey period. The dominant species was Zacco platypus (relative abundance, 46.5%), and the subdominant species was Squalidus gracilis majimae (16.7%), followed by Rhynchocypris oxycephalus (12.0%), Z. koreanus (5.7%), Pungtungia herzi (3.2%), R. pseudosericeus (2.0%), R. notatus (1.9%), and Acheilognathus rhombeus (1.8%). Nine Korean endemic species (36.0%) were collected, including R. pseudosericeus, R. uyekii, Sarcocheilichthys variegatus wakiyae, Microphysogobio yaluensis, S. gracilis majimae, Z. koreanus, Cobitis nalbanti, Iksookimia koreensis, and Odontobutis interrupta. An exotic species, Micropterus salmoides, designated as an invasive alien species (IAS), was collected downstream. The investigation of the habitat patterns of the endangered species (class II), Rhodeus pseudosericeus, showed a habitat range of about 6 to 7 km in the middle of Geumdang Stream (RP-1 to RP-4), and this species inhabited the edge with water depths of 0.3 through 1.0 m with slow water flow and many aquatic plants. According to the community analysis results, the overall dominance and evenness indexes were low, while diversity and richness indexes were high, and the cluster structure was largely divided into upstream and middle-downstream areas. The river health (fish assessment index) evaluated using fish was assessed as good (3 stations), normal (3 stations), and bad (1 station), and water quality was evaluated as good both upstream and downstream. Compared to previous studies, the number of species was relatively similar, and among the species that appeared in the past, 13 species did not appear in this survey, while 6 species appeared for the first time in this survey. Disturbance factors included river construction, many weirs, and the appearance of the ecosystem-disturbing species, M. salmoides. Since Geumdang Strem has high conservation value because it is home to many species in the Acheilognathinae subfamily, including the endangered species R. pseudosericeus, continuous attention and systematic conservation measures are required.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.3
• /
• pp.133-149
• /
• 2021

This study aims to report the behavioral mechanism of steel pipe reinforcement grouting, which is being actively used to ensure the stability of the excavation surface during tunnel excavation, based on measurements taken at the actual site. After using a 12 m steel pipe attached with a shape displacement meter and a strain gauge to reinforce the actual tunnel surface, behavioral characteristics were identified by analyzing the measured deformation and stress of the steel pipe. Taking into account that the steel pipes were overlapped every 6 m, the measured data up to 7 m of excavation were used. In addition, the behavioral characteristics of the steel pipe reinforcement according to the difference in strength were also examined by applying steel pipes with different allowable stresses (SGT275 and SGT550). As a result of analyzing the behavior of steel pipes for 7 hours after the first excavation for 1 m and before proceeding with the next excavation, the stress redistribution due to the arching effect caused by the excavation relaxation load was observed. As excavation proceeded by 1 m, the excavated section exhibited the greatest deformation during excavation of 4 to 6 m due to the stress distribution of the three-dimensional relaxation load, and deformation and stress were generated in the steel pipe installed in the ground ahead of the tunnel face. As a result of comparing the behavior of SGT275 steel pipe (yield strength 275 MPa) and SGT550 steel pipe (yield strength 550 MPa), the difference in the amount of deformation was up to 18 times and the stress was up to 12 times; the stronger the steel pipe, the better it was at responding to the relaxation load. In this study, the behavior mechanism of steel pipe reinforcement grouting in response to the arching effect due to the relaxation load was identified based on the measured data during the actual tunnel excavation, and the results were reported.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.378-385
• /
• 2006

To release fashion trends in an efficient way, many of the apparel business and fashion educational institutes in land adopt fashion shows employing fashion models. Modeling rather than flat pattern making realizes the majority of the complicated design works for the fashion shows. However, for the different measurements between the dress form and the real human model, problems often occur during the modeling and fitting processes. Researches on the standard dress form development representing professional fashion models' features are therefore in urgent need to enable the related apparel business and fashion institutes to make appropriate use of the dress form in their jobs. The study has been conducted as a preliminary study using a questionnaire method ultimately to develop the female dress form. A questionnaire in the research aimed at an investigation into the actual conditions of and satisfaction with the usage and the body measurements of existed dress forms. Approximately 30 fashion-related educational institutes and 10 apparel companies responded to the survey. Data derived from the survey was analyzed using SPSS version 10.1, the statistics tool. The results throughout the research were discussed in terms of largely three categories that are; (1) the general conditions of the usage of the dress form to prepare fashion shows: e.g. the frequency of holding the fashion show in an annual term, the proportion of professional and amateur models employed for the fashion show, the methods to construct garments, types and number of dress forms utilized and etc.; (2) factors considered to purchase the dress form e.g. its functionality, shapes, sizes, duration, price, A/S condition and etc.; and(3) satisfaction with the similarity between the dress form and the human body in the relation to the body measurements. Measurements in length wise, front and back waist lengths, neck to bust point on the dress forms were apparently differed from the ones of the actual body. In particular, differed torso length measurements cause the problem to have to alter the whole silhouette, consequently, the resultant patterns as well. In girth measurements, in order of bust and waist girths, the satisfaction was low.