• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.159-166
• /
• 2009

On freeways, factors inducing traffic accidents consist of two major elements such as driver factors and road environment factors. Research have been done and shown that there would be relationship between design elements such as radius, slopes, superelevations, and observed speeds and accident rates. The present paper confirms that these elements are correlated with accident rates. Furthermore, the paper identifies standard deviation of these elements as the design consistency and compare them with reduction of accident rates. This type of work leads to identify the fact that standard deviations based design consistency are correlated with accident rates. The results of the paper may contribute to encourage the quantified use of design consistency during highway design.

• Proceedings of the KOR-KST Conference
• /
• 2007.02a
• /
• pp.306-314
• /
• 2007

This paper is to develop a model for evaluation of highway alignment design considering the driver's behavior in order to enhance the highway safety. Under the conditions, this research included a new evaluation criteria development and an analysis on how to change evaluation criteria according to roadway alignments, to evaluate safety. The vehicle spacing and speed deviation are suggested as new evaluation index The evaluation criteria model can be used to compare the anticipated safety performance of two or more geometric alternatives for a proposed highway improvement.

• 한국도로학회지:도로
• /
• v.10 no.4
• /
• pp.17-21
• /
• 2008

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.247-255
• /
• 2008

According to "A guide Book to Highway Design", most road elements are chosen based on a certain design speed in order to ensure obtaining safe and smooth traffic operating. However, road safety in practical way is corelative to not only all element of roads but also road shape, for example, between straight line and curves line and between curved lines. Also, it is relates to alignments such as horizontal alignment, vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness as the practical road is a 3-dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicle and state of drivers. Especially, the magnitude of acceleration is a quite influential element to drivers. Based on above, the acceleration on each point 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2008

Five bases for of highways are sight distance, vehicle stability, driver comfort, drainage and aesthetics. Among these bases, the sight distance is the most critical one in the highway alignment design. It is certain that highways and drivers' observation actions are 3-dimensional in nature. But, the highway alignment design and the sight distance analysis have been performed on 2-dimensional planes because of various constraints and complexity of calculating 3-dimensional sight distance. The purpose of this study is to derive a model for determining exact available sight distance in 3-D combined horizontal and vertical alignments. Application of the model is illustrated using numerical examples. The proposed model should be useful in quantifying the criteria for 3-D highway alignments.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.195-212
• /
• 1998

본 연구는 새로운 설계일관성 검토기법의 정립을 위하여 수행되었으며, 이를 위해 속도추정 모형을 개발하였다. 본 연구를 통해 개발된 모형은 차량의 주행속도에 가장 큰 영향을 미치는 주 요소를 고려한 장점을 지니고 있다. 즉 평면곡선에서는 운전자의 시각적 판단을 기초로 등판차량의 주행속도를 추정하였다. 또한 이러한 속도추정이 승용차뿐만 아니라 트럭의 경우로 나누어 이루어짐으로써, 차종별 고려가 가능하도록 하였다. 다음은 본 연구를 통해 이루어진 결과이다. 평면곡선에서는 승용차와 트럭의 속도가 같게 추정되었으며, 시거를 통해 산정된 추정속도는 곡선반경과 밀접한 관계를 갖는다. 종단선형에서 승용차의 속도는 구배의 영향을 받지 않으나, 트럭은 구배의 영향으로 속도가 감소한다. 이 때 트럭에 작용되는 가속도는 모두 세 종류로써, 첫째, crawl speed에 도달할 때까지 작용한 가속도$(a_1)$와 둘째, crawl speed 이후 작용한 가속도$(a_2)$ 그리고 셋째, 하향구배 주행시 작용된 가속도$(a_3)$로 구분된다. Watanatade가 제시한 것과 같이 평지에서 나타나는 평면곡선의 주행속도와 구배지에서의 속도를 단순 비교 함으로써, 작은 속도의 궤적을 따라 평지에서 나타나는 평면곡선의 주행속도와 구배지에서의 속도를 단순 비교함으로써, 작은 속도의 궤적을 따라 합성선형의 속도를 추정하는 것은 합성선형이 차량의 주행속도에 미치는 영향을 간과한 것으로 판단할 수 있다. 그러나 본 모형에서는 합성선형의 영향을 고려하여 승용차와 트럭의 주행속도를 추정함으로써, 보다 현실적으로 주행속도를 추정하였다. 본 연구의 결과는 도로의 설계일관성을 검토하는데 매우 유용한 도구가 될 것이며 향후 운전자의 희망속도 결정, 감속율의 산정, 교통류의 고려, 도로설계의 전산화 자료와 연결 등을 통해 보다 실용적인 결과를 산출할 수 있을 것이다.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.35-45
• /
• 2005

The speed enforcement camera has been regarded as one of the most important safety countermeasures. Drivers decelerate in front of the speed enforcement camera and gain speed up after passing the camera. So there is a strong need to develop the method how to place the camera to overcome this problem. This study applied the concept of design consistency to the installation of the camera, so speed difference along the road sections should be controlled within the predetermined boundary. Specially, this study also regarded camera as the one of the elements of the road alignments which can change the speed of drivers abruptly, and suggested the way to put this concept into the selection of the placement of the camera.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.57-67
• /
• 2008

At present engineers use the highway design speed concept to develop the horizontal alignment. This concept has a strength of attaining consistent horizontal alignments because of its use of a single speed value. Yet it shows a critical weakness that when opened the operating speed for the vehicles on the road can be a lot different than the design speed. To resolve this, many countries already develop the horizontal alignment by adopting procedures that weigh vehicle operating speeds, and this research joins them by developing an operating speed based horizontal alignment design. We have collected vehicle speed samples over the nation, selected some speed influential design elements by doing a statistical analysis, provided a set of models for two-lane roads and four lane roads, and showed a stepwise feedback procedure by doing a case study. It is underscored that in the case study the proposed procedure has scaled down the speed inconsistency problem, and we are of opinion that our procedure would coin both investment efficiency and speed consistency in future highway projects.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.96-98
• /
• 2000

현행 토지 지번 중심의 주소체계는 불규칙적인 지번의 배열으로 상호 연계성이 부족하여 사회적 비용이 발행, 이러한 문제 해결하고 국가경쟁력을 높이고자 선진국과 같은 체계적이고 합리적인 주소체계와 정확성, 일관성, 융통성, 경제성 등을 갖출 수 있는 도로방식에 의한 도로명과 건물번호를 체계적으로 부여하는 새로운 주소 체계를 도입하기로 하였다. 이에 본 논문에서는 새주소 사업에 있어 핵심이 되는 새주소 관리 시스템과 관리시스템의 부 시스템인 도로명판관리 시스템에 관하여 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.102-104
• /
• 2000

우리나라의 지번체계는 인구증가와 경제발전에 따른 도시의 팽창과 각종 개발사업에 따른 토지의 등록, 분할 및 합병 등이 빈번하게 발생함에 따라서 불규칙하고 불합리하게 지번이 부여되어 왔다. 이에 따라 선진국과 같은 체계적이고, 합리적인 주소체계의 필요성이 꾸준히 대두되어 왔으며 정확성, 일관성, 유통성, 경제성, 검색성 등의 여러 가지 특성을 갖출 수 있는 도로방식에 의한 도로명과 건물번호를 체계적으로 부여하는 새로운 주소체계를 도입하기로 하였다. 이러한 이유로 필요성이 높아지고 있는 새주소 관리 시스템은 크게 4개의 부시스템으로 나누어지는데 본 논문에서는 이러한 4개의 부시스템 중에서 도로 관리 시스템 대하여 새주소 부여 체계와 원칙에 따라 설계하고 MAPINFO 와 MAPBASIC 언어를 이용하여 구현한다.