• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.2
• /
• pp.95-100
• /
• 1999

Hydrocarbon compounds in vadose zone soils caused by adsorption onto the surfaces of solid particles are generally considered to show retardation effect. In this study, we investigated the retardation effect on the transport of Benzene in a sandy soil by conducting batch and column tests. The batch test was conducted by equilibrating dry soil mass with Benzene solutions of various initial concentrations. and by analyzing the concentrations of Benzene in initial and equilibrated solutions using HPLC. The column test consisted of monitoring the concentrations of effluent versus time known as a breakthrough curve (BTC). We used KCl and Benzene solutions with the concentration of 10 g/L and 0.88 g/L as a tracer, and injected them into the inlet boundary of the soil sample as a square pulse type respectively, and monitored the effluent concentrations at the exit boundary under a steady state condition using an EC-meter and HPLC. From the batch test, we obtained a distribution coefficient assuming that a linear adsorption isotherm exists and calculated the retardation factor based on the bulk density and porosity of the column sample. We also predicted the column BTC curve using the retardation factor obtained from the distribution coefficient and compared with the measured BTC of Benzene. The results of the column test showed that i) the peak concentration of Benzene was much smaller than that of KCl and ⅱ) the travel times of peak concentrations for the two tracers were more or less identical. These results indicate that adsorption of Benzene onto the sand panicles occurred during the pulse propagation but the retardation of Benzene caused by adsorption was not present in the studied soil. Comparison of the predicted with the measured BTC of Benzene resulted in a poor agreement due to the absence of the retardation phenomenon. The only way to describe the absolute decrease of Benzene concentration in the column leaching experiment was to introduce a decay or sink coefficient in the convection-dispersion equation (CDE) model to account for an irreversible sorption of Benzene in the aqueous phase.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.483-489
• /
• 2009

The Time Difference of Arrival (TDOA) algorithm is being used widely for identifying the location of a source emanating either electrical or acoustic signal. It's application areas will not be limited to identifying the source at a fixed location, for example the origin of an earthquake, but will also include the trajectory monitoring for a moving source equipped with a GPS sensor. Most of the TDOA algorithm uses time correlation technique to find the time delay between received signals, and therefore difficult to be used for identifying the location of multiple sources. In this paper a TDOA algorithm based on cross-spectrum is developed to find the trajectory of two sound sources with different frequencies. Although its application is limited to for the sources on a disk plane, but it can be applied for identifying the locations of more than two sources simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.957-964
• /
• 2010

In this paper, we propose an indoor positioning algorithm based on 3 points near field angle-of-arrival estimation without side information. The conventional angle-of-arrival based positioning scheme requires the distance between the listener and the center of two points which is obtained by a received signal strength based range estimation. However, a received signal strength is affected by structure of room, placement of furniture, and characteristic of signal, these effects cause a large error to estimation of angle. In this paper, the proposed positioning scheme based on near field angle-of-arrival estimation can be used to estimate the position of listener without a prior distance information, just using time-difference-of-arrival information given from 3 points microphones. The performance of the proposed scheme is shown by cumulative distribution function of root mean squared error.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.3
• /
• pp.115-122
• /
• 2011

In this paper, we present a method to estimate an accurate real-time sound source direction based on time delay of arrival by using generalized cross correlation with four cross-type microphones. In general, existing systems have two disadvantages such as system embedding limitation due to the necessity of data acquisition for signal processing from microphone input, and real-time processing difficulty because of the increased number of channels for sound direction estimation using DSP processors. To cope with these disadvantages, the system considered in this paper proposes hardware design for enhanced real-time processing using microphone array signal processing. An accurate direction estimation and its design time reduction is achieved by means of an efficient hardware design using spatial segmentation methods and verification techniques. Finally we develop a system which can be used for embedded systems using a sound codec and an FPGA chip. According to experimental results, the system gives much faster real-time processing time compared with either PC-based systems or the case with DSP processors.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.437-443
• /
• 2019

In this paper, a new algorithm for the calculation of the range between an LTE base station (BS) and a user equipment (UE) using time-of-arrival (TOA) measurements of LTE signals is proposed. First, the cell identity (cell ID) of the received signal is acquired using the primary synchronization signal (PSS) and secondary synchronization signal (SSS) to identify the BS transmitted the signal. The proposed algorithm exploits the cell-specific reference signal (CRS), the reference sequence inserted in commercial LTE signals, to estimate the time delay using 2D cross-correlation. The obtained TOA estimations can be used to calculate the range employed from the known BS location. The performance of the proposed algorithm is evaluated with the experiment performed using real LTE signals transmitted from the commercial BS.

• Journal of the Korean Society of Groundwater Environment
• /
• v.5 no.3
• /
• pp.155-161
• /
• 1998

Retardation effect of heavy metals in soils caused by adsorption onto the surfaces of solids particles is well known phenomenon. In this study, we investigated the retardation effect on the mobility of a Zn in a sandy soil by conducting batch and column tests. The column test consisted of monitoring the concentrations of effluent versus time known as a breakthrough curve (BTC). We used NaCl and ZnCl$_2$ solutions with the concentration of 10 g/L as a tracer, and injected them respectively into the inlet boundary of the soil sample as a square pulse type, and monitored the effluent concentrations at the exit boundary under a steady state condition using an EC-meter and ICP-AES. The batch test was conducted based on the standard procedure of equilibrating fine fractions collected from the soil with various initial ZnCl$_2$ concentrations, and analysis of Zn ions in the equilibrated solutions using ICP-AES. The results of column test showed that i) the peak concentration of ZnCl$_2$analyzed by ICP was far less than that of either NaCl or bulk electrical conductivity and ⅱ) travel times of peak concentrations for two tracers were more less identical. The relatively low concentration of Zn can be explained by ion exchange between Zn and other cations, and possible precipitation of Zn in the form of Zn(OH)$_2$due to high pH range (7.0∼7.9) of the effluent. The identical result of travel times of peak concentrations indicates that the retardation effect is not present in the soil. The only way to describe the prominent decrease of Zn ion was to introduce decay or sink coefficient in the CDE model to account for irreversible decrease of Zn ions in the aqueous phase.

• The Korean Journal of Zoology
• /
• v.10 no.2
• /
• pp.1-8
• /
• 1967

토끼의 골격근 homogenate에서 23,000$\times$G, 60 분간의 원심분리와 얻은 근 microsome의 ATPase 활성, 근수축에 대한 이완작용, 및 Ca 의 흡수작용을 여러 가지 조건에서 측정하였다. ATPase 활성은 Ca++ Mg++ 양 이온의 존재에 의하여 활성화되며 , 5 mM Mg++ 의 존재하에서는 Ca++ 의 최적농도는 0.1mM이다. Oxalate의 존재하에서는 1 mM 의 Ca++ 이 최적농도이므로 oxalate의 작용은 불용성 Ca-oxalate의 작용은 불용성 Ca-oxalate를 microsome vesicle so 및 medium 내에 침전시켜 유리 Ca++ 농도를 저하시키는 것이라고 생각된다. Microsome의 이완작용은 조제후 120 시간까지 시간에 따라 감소되어 가나, 그이 ATPase 활성은 거의 변화가 없는 것으로 보아 Ca++ + Mg++ -의존성 ATPase 는 이완작용에는 직접 관련이 없는 것으로 해석된다. Oxalatedmlwhswo는 microsome의 Ca++ 흡수량을 현저히 증대시키며 동시에 흡수포화에 도달하는 시간을 지연시킨다. Oxalate의 이러한 효과도 Ca-oxalate의 형성에 기인하는 것으로 해석된다. Microsome 내에 축적되는 Ca 의 량은 ATP 농도가 커질수록 많아진다. 그러나 축적된 Ca 의 량과 ATP 농도사이에 화학정량론적 관계는 없는 것같다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1795-1796
• /
• 2008

과학기술의 발전과 함께 인간형 서비스 로봇에 대한 관심이 고조되고 있다. 서비스 로봇의 핵심 중의 하나는 인간과의 상호작용이라 할 수 있다. 자연스러운 상호작용을 위하여, 화자를 바라보고, 깨끗한 음성신호를 얻는 과정에서 음원의 위치 측정은 필연적이다. 본 논문은 마이크로폰에 도달되는 동일 신호의 도착시간지연(Time Delay of Arrival: TDOA) 특성 행렬을 정의하고, 이를 이용하여 공간상의 화자 위치 측정 방법론을 제안하였다. 휴머노이드 로봇의 머리에 마이크로폰 배열을 구성하였고, 실제 시스템을 통한 실험을 통하여 방향 검지 및 높이 구분을 실행하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2753-2755
• /
• 2005

최근 들어 공장에서만 사용되는 로봇을 탈피하여, 사람과 함께 생활하면서 서비스를 제공할 수 있는 인간 친화적인 로봇이 전 세계적으로 개발되고 있다. 인간과 자연스런 상호작용을 위하여, 화자를 바라보고, 깨끗한 음성신호를 얻는 과정에서 음원의 위치 추적은 필연적이다. 본 연구는 마이크로폰에 도달되는 동일 신호의 도착시간지연(Time Delay of Arrival)정보를 이용하여, 음원 위치를 구하는 기존의 수학적인 방법론[1]을 소개하고 검토한다. 모의실험을 통하여, 방법론[1]이 허상음원을 생성하는 음원 위치 측정임을 보인다.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.743-752
• /
• 2014

Delay time for groundwater recharge means the travel time from the bottom of soil layer to groundwater through vadose zone after infiltration from rainfall. As it is difficult to measure delay time, we suggested an empirical formula which is derived by using linear regression between altitude and delay time. For the regression analysis, 4 major gauging watersheds were chosen (Hancheon, Kangjeongcheon, Oedocheon, Cheonmicheon) with 18 measured groundwater level stations. To verify this empirical formula, derived equation from linear reservoir theory was applied to compute delay time and to compare estimated amounts of groundwater recharge using both methods. The result showed good agreement. Furthermore, if derived empirical formula would be linked with SWAT model, the spatial time delay effect in the watershed could be reflected properly.