• Korean Journal of Ecology and Environment
• /
• v.41 no.2
• /
• pp.237-246
• /
• 2008

Filtration rates and fecal production of freshwater bivalve, Unio douglasiae on two kinds of hibernal diatom communities were measured simultaneously in a laboratory. One community is the Han River (HAN), which dominated by Asterionella Formosa. Stephanodiscus hantzschii (ca. 98% of total phytoplankton). The other community is the Ilgam Lake (IL), which dominated by Synedra ulna, Scenedesmus sp. Microcystis aeruginosa (ca. 82%). The HAN water has higher concentrations of nutrient (TN and TP) and chlorophyll $\alpha$ (Chl-$\alpha$), lower turbidity and conductivity than the IL water. Water sampling for the feeding experiment was conducted in the same day (Jan 15, 2008) and similar time (AM 10:00 for HAN, AM 11:00 for IL). Mussels with the similar size ($0.0{\pm}0.5\;cm$) were collected from the Gunsan and Okgu district (Jeonbuk), and starved in a laboratory for 2 days before the experiment. The experiment comprised CON (no addition of mussel), LOW (addition of mussel at 0.3 indiv. $L^{-1}$), MID (1.0 indiv. $L^{-1}$) and HIGH (2.0 indiv. $L^{-1}$), respectively. With the increment of mussel density and time, the concentration of Chl-$\alpha$ in two diatom communities were clearly decreased; Chl-$\alpha$ of HAN gradually decreased after 1 hour of mussel treatment, while that of IL decreased as soon as mussel introduction. In 7 hours of treatment, the former was removed finally up to about 90% of control, while the later was remained as about 50%. Under the presence of mussel, total phytoplankton density was shifted as the similar patterns to that of Chl-$\alpha$ (r=0.705, P<0.0001), however, there showed the drastic differences following a species. Based on the concentration of Chl-$\alpha$, filtration rate of U. douglasiae averaged 0.266 $L\;g^{-1}\;h^{-1}$ (0.115 to 0.442) on HAN and $0.577\;L\;g^{-1}\;h^{-1}$ (0.146 to 1.428) on IL water, respectively. There were no differences in feces production among the mussel density in the HAH water (ANOVA, P>0.5), while in IL water, including lots of seston, the HIGH mussel produced the higher fecal materials, over one hundred times of LOW. These results suggest that freshwater bivalve Unio douglasiae have the alternative potential, as a filter-feeder of seston in turbid lake, and a biological controller of diatom bloom in cold stream.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.193-200
• /
• 2010

This study evaluated treatability of soluble Mn(II) using multifunctional sand media simultaneously coated with iron and manganese. In the preparation of IMCS(Iron and Manganese Coated Sand), 0.05 M Mn(II) solution and Fe(III) solution was mixed with sand at pH 7. The mineral type of IMCS was identified as the mixture of ${\gamma}-MnO_2$, goethite and magnetite($F_{e3}O_4$). The contents of Mn and Fe coated onto sand were 826 and 1676 mg/kg, respectively. The $pH_{pzc}$ of IMCS was measured as 6.40. The removal of soluble Mn(II) using IMCS and oxidants such as NaOCl and $KMnO_4$ was investigated with variation of the solution pH, reaction time and Mn(II) concentration in a batch test. The removal of Mn(II) on IMCS was 34% at pH 7.4 and the removals of Mn(II) on IMCS in the presence of NaOCl(13.6 mg/L) at pH 7 and $KMnO_4$(4.8 mg/L) at pH 7.6 were 96% and 89%, respectively. The removal of Mn(II) using IMCS and oxidants followed a typical cationic type, showing a gradual increase of removal as the solution pH increased. The removal of Mn(II) was rapid in the first 6 hrs and then a constant removal was observed. The maximum removed amount of Mn(II) on IMCS-alone and IMCS in the presence of oxidants such as NaOCl(13.6 mg/L) and $KMnO_4$(4.8mg/L) were 833.3, 1428.6 and 1666.7 mg/kg, respectively. Mn(II) removal onto the IMCS in the presence of oxidants was well described by second-order reaction and Langmuir isotherm expression.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.296-305
• /
• 2006

The adsorption and persistence of pencycuron {1-(4-chlorobenzyl) cyclopentyl-3-phenylurea} in soils were investigated under laboratory and field conditions to in order to assess the safety use and environmental impact. In the adsorption rate experiments, a significant power function of relation was found between the adsorbed amount of pencycuron and the shaking time. Within one hour following the shaking, the adsorption amounts in the SCL and the SiCL were 60 and 65% of the maximum adsorption amounts, respectively. The adsorption reached a quasi-equilibrium 12 hours after shaking. The adsorption isotherms followed the Freundlich equation. The coefficient (1/n) indicating adsorption strength and degree of nonlinearity was 1.45 for SCL and 1.68 to SiCL. The adsorption coefficients ($K_d$) were 2.31 for SCL and 2.92 to SiCL, and the organic carbon partition coefficient, $K_{oc}$, was 292.9 in SCL and 200.5 inSiCL. In the laboratory study, the degradation rate of pencycuron in soils followed a first-order kinetic model. The degradation rate was greatly affected by soil temperature. As soil incubation temperature was increased from 12 to $28^{\circ}C$, the residual half life was decreased from 95 to 20 days. Arrhenius activation energy was 57.8 kJ $mol^{-1}$. Furthermore, the soil moisture content affected the degradation rate. The half life in soil with 30 to 70% of field moisture capacity was ranged from 21 to 38 days. The moisture dependence coefficient, B value in the empirical equation was 0.65. In field experiments, the half-life were 26 and 23 days, respectively. The duration for period of 90% degradation was 57 days. The difference between SCL and SiCL soils varied to pencycuron degradation rates were very limited, particularly under the field conditions, even though the characteristics of both soils are varied.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.135-142
• /
• 2010

The composting of layer manure is economical and efficiently process. In this study, the variation of composting characteristics in layer manure was investigated according to air supply capacity. The fermented compost was added in layer manure and mixed with sawdust inside composting reactors. The level of air supply capacity was varied in the range of $50{\sim}200\;{\ell}/m^3/min$. During composting the temperature variations of composting piles was different the temperatures of composting piles for T-1 ($50\;{\ell}/m^3/min$) and T-2 ($100\;{\ell}/m^3/min$) were reached at $40^{\circ}C$ and $50^{\circ}C$ within 2 days, respectively. For T-3 ($150\;{\ell}/m^3/min$) and T-4 ($200\;{\ell}/m^3/min$), their temperatures was $60^{\circ}C$ within same days and maintained during 8 days. Water contents decreased according to the air supply capacity; 8.9%, 15.4%, 18.0% and 18.6% for T-1, T-2, T-3 and T-4. The weight ratios of T-1, T-2, T-3 and T-4 were reduced to 12.8%, 15.6%, 18.1% and 17.9%, respectively. The decreasing volumetric ratios of T-1, T-2, T-3 and T-4 were 18.0%, 21.0%, 22.3% and 22.0%. The oxygen discharge concentrations during composting were 12 ppm for T-1, T-2 and 9 ppm for T-3 and T-4. After composting, fertilizer components such as total nitrogen (TN) and phosphorous pentoxide ($P_2O_5$) were examined at each air supply capacity. Nitrogen contents of the T-1, T-2, T-3 and T-4 were 0.75%, 0.74%, 0.72% and 0.64%. Also, The contents of $P_2O_5$ were 0.35%, 0.40%, 0.38% and 0.42% for T-1, T-2, T-3 and T-4.

• Clinical and Experimental Reproductive Medicine
• /
• v.36 no.4
• /
• pp.275-281
• /
• 2009

Objective: This study was performed to evaluate the effect of oxytocin antagonist on the outcome of IVF/ICSI cycles in infertile patients with repeated failure of IVF/ICSI treatment. Method: Forty patients who had experienced two or more failures of IVF/ICSI treatment without low ovarian reserve, were recruited for this prospective randomized study. All patients received controlled ovarian stimulation (COS) using GnRH antagonist multidose protocol (MDP). For the intervention group, intravenous administration of atosiban (mixed vasopressin $V_{1A}$/oxytocin antagonist) started with a bolus dose 6.75 mg one hour before embryo transfer (ET) and continued at an infusion rate of 18 mg/hour. After ET, administered atosiban was reduced to 6 mg/hour and continued for 2 hours. The main efficacy endpoints were clinical pregnancy rate and implantation rate. Results: Patients' characteristics were comparable in the intervention and control groups. COS parameters and IVF results were also similar. The number of uterine contractions for 3 minutes measured just before ET was significantly lower in the intervention group than control group ($3.5{\pm}1.4$ vs $8.7{\pm}2.2$, p<0.001). While there was no statistically significant difference in the clinical pregnancy rate between control group and intervention group (20.0% and 40.0%, p=0.168), the implantation rate was significantly higher in the intervention group, with 16.9% (11/65) compared with 6.0% (4/67) in the control group (p=0.047). There were no differences in ectopic pregnancy rate and miscarriage rate between the two groups. Conclusion: This study demonstrates that administration of oxytocin antagonist during ET can improve the implantation rate probably by decreasing the frequency of uterine contractions in infertile patients undergoing IVF/ICSI treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.833-840
• /
• 2017

For wide application of perilla leaf, which has various healthy functions and can be easily cultured across Korea, the physicochemical and sensory properties of pan bread made with various amounts of squeezed perilla leaf juice (SPLJ) were analyzed. When dough characteristics were analyzed by using farinograph, consistency and dough development time were not significantly different between the control and bread dough made with various amounts of SPLJ, whereas dough stability time increased with increasing SPLJ amount. Expansion rate of dough decreased with increasing SPLJ amount. The volume, specific volume, and baking loss rate of pan bread made with various SPLJ amounts decreased with increasing SPLJ amount. Pan bread crumb colors became thickened and greenish with increasing SPLJ amount. For physical properties of pan bread made with various SPLJ amounts, springiness and cohesiveness decreased with increasing SPLJ amount, whereas brittleness, chewiness, and hardness increased with increasing SPLJ amount. In the sensory strength analysis, pore uniformity and soft texture decreased with increasing SPLJ amount, whereas crumb color (dark greenish), perilla leaf odor, perilla leaf taste, and chewing texture increased with increasing SPLJ amount. In the overall acceptance analysis, 1.5% SPLJ was the most preferred with a score of 7.10. However, statistical differences between 1.5% and 1.0% SPLJ were not detected at P<0.05. In the partial least squares analysis, consumers liked bread with a green crumb color, perilla leaf odor, perilla leaf taste, and soft and chewing texture. In conclusion, physicochemical properties of pan bread made with SPLJ were less desirable than those of the control; however, consumer acceptance of pan bread made with 1.5% SPLJ was shown the highest. Therefore, methods for increasing physicochemical properties of pan bread made with SPLJ need to be developed for wide application of perilla leaf.

• Food Science and Preservation
• /
• v.24 no.8
• /
• pp.1067-1078
• /
• 2017

This study was carried out to investigate the physicochemical and antioxidant properties of fermented milk with addition of hot water extract of Cordyceps militaris grown upon Tenebrio molitor. The general components of Cordyceps militaris grown upon Tenebrio molitor are moisture 10.85%, crude protein 18.44%, crude fat 2.07%, crude ash 5.46%. The DPPH radical scavenging activities of different solvents were the highest (74.81 EDA%) with hot water extract sample. The acidity of fermented milk was high with increasing amount of extracts. The pH of fermented milk reached 4.60-4.66 after 4 h of fermentation, and the number of lactic acid bacteria was highest (11.70 log CFU/mL) with 1% fermented milk. The moisture content of fermented milk showed no significant difference. In addition, contents of crude protein were not significantly different according to addition amount. Regarding Hunter's color values, L value decreased as the amount of extract increased, whereas a value and b value increased. The content of free amino acid increased with increasing amount of extract. The DPPH free radical scavenging ability and ABTS free radical scavenging ability of fermented milk were significantly different as the addition amount of extract increased. In the sensory evaluation, fermented milk containing 1% of extract showed the highest preference.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.100
• /
• pp.82-110
• /
• 2021

This study specifically examined the date of the black glazed bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" of Jian ware, one of the key research topics related to the bowls. The results of this study can be summarized as follows. Jian Kiln produced various shapes of black glazed bowls, but almost all of the inscriptions of "Gongyu (供御)" or "Jinzhan (進琖)" are found only in two certain type bowls: Type I, the Shukou type bowls (束口碗), or Type II, the Piekou type bowls (撇口碗). Of these, there are significantly more of the former in existence. For Type I bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)", the mouth of the bowls is slightly evaginated outwards, and the inclination angle of the side slope is about 50°. The shape feature, Shukou (束口) is formed which is slightly indented around the bowl about 0.3~0.5cm below the mouth of bowl. And the height of the bowls is relatively low compared to other Type I black glazed bowls produced by Jian Kiln, so the height divided by the diameter is 0.5 or less. There is little difference in shape between the black glazed bowls marked with "Gongyu (供御) and those with "Jinzhan (進琖)". However, taking into consideration the excavation situation of both type bowls, the former is considered to be ahead of the latter in terms of production date. On the other hand, the black glazed bowls of Jian ware, which have the same shape features as the Type I bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" have not been found in the tombs dating from the end of the 12th to the beginning of the 13th century from which typical Jian kiln black glazed bowls of the same type were excavated. For the Hakata site (博多遺址) in Japan, the black glazed bowls with such a shape feature were excavated from early 12th century sites, rather than from the late 12th to early 13th century sites at which the typical black glazed bowls of Jian kiln were found. Considering that the black glazed bowls from Fujian province were imported into Hakata with almost no time gap, it is very unlikely that the production time of Type I black glazed bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" will deviate from the early 12th century. In conclusion, it is considered that the black glazed bowls marked with "Gongyu (供御)" or "Jinzhan (進琖)" of Jian ware were produced in the early 12th century.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.4
• /
• pp.442-450
• /
• 1999

Background : Isoniazid(INH) and rifampicin(RFP) are the most effective anti-tuberculosis drugs which make the short-course chemotherapy possible. Although prescribed dosages of INH and RFP in Korea are different from those recommended by American Thoracic Society, there has been few study about pharmacokinetic profiles of INH and RFP in Korean patients who receive INH, RFP, ethambutol(EMB) and pyrazinamide(PZA) simultaneously. Methods : Among the patients with active tuberculosis from Dec. 1997 to July 1998, we selected 17 patients. After an overnight fast, patients were given INH 300mg, RFP 450mg, EMB 800mg and PZA 1500mg daily. Blood samples for the measurement of plasma INH(n=15) and RFP(n=17) level were drawn each at 0, 0.5, 1, 1.5, 2, 4, 6, 8 and 12hrs, and urine was also collected. INH and RFP level in the plasma and the urine were measured by high-performance liquid chromatography(HPLC). Pharmacokinetic parameters such as peak serum concentration(Cmax), time to reach to peak serum concentration(Tmax), half-life, elimination rate constant(Ke), total body clearance(CLtot), nonrenal clearance(CLnr), and renal clearance(CLr) were calculated. Results : 1) Pharmacokinetic parameters of INH were as follows: Cmax; $7.63{\pm}3.20{\mu}g/ml$, Tmax; $0.73{\pm}0.22hr$, half-life; $2.12{\pm}0.84hrs$, Ke; $0.83{\pm}0.15hrs^{-1}$, CLtot; $17.54{\pm}8.89L/hr$, CLnr; $14.74{\pm}8.35L/hr$, CLr; $2.79{\pm}1.31L/hr$. 2) Pharmacokinetic parameters of RFP were as follows: Cmax; $8.93{\pm}3.98{\mu}g/ml$, Tmax; $1.76{\pm}1.13hrs$, half-life; $2.27{\pm}0.54hrs$, Ke; $0.32{\pm}0.08hrs^{-1}$, CLtot; $14.63{\pm}6.60L/hr$, CLr; $1.04{\pm}0.55L/hr$, CLnr; $13.59{\pm}6.21L/hr$. 3) While the correlation between body weight and Cmax of INH was not statistically significant (r=-0.514, p value>0.05), Cmax of RFP was significantly affected by body weight of the patients(r=-0.662, p value<0.01). Conclusion : In Korean patients with tuberculosis, 300mg of INH will be sufficient to reach the ideal peak blood level even in the patients over 50kg of body weight However, 450mg of RFP will not be the adequate dose in the patients who weigh over 50~60kg.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.272-278
• /
• 2013

The hybrid system composed of a photocatalytic reactor and a biofilter was operated under various operating conditions in order to treat malodorous waste air containing ammonia which is a major air pollutant emitted from composting factories and many publicly owned treatment works. Total ammonia removal efficiency of the hybrid system was maintained to be ca. 80% even though its inlet loads were increased at a higher operating stage according to an operating schedule of the hybrid system. The ammonia removal efficiency of photocatalytic reactor was decreased from 65% to 22% as ammonia inlet loads to photocatalytic reactor were increased. In spite of same inlet loads of ammonia to the photocatalytic reactor, the ammonia removal efficiency of photocatalytic reactor with lower ammonia concentration of fed-waste air was higher than that with higher ammonia concentration of fed-waste air. To the contrary, during the first half of the hybrid system operation the ammonia removal efficiency of a biofilter was quite suppressed while, despite of increased ammonia inlet loads, the ammonia removal efficiency of the biofilter was continuously increased to 78% and reached the ammonia removal efficiency similar to what Lee et al. attained. The maximum ammonia elimination capacity of the photocatalytic reactor was observed to be ca. 16 g-N/$m^3$/h. In an incipient stage of hybrid system run, the ammonia elimination capacity of the biofilter showed little sensitivity against ammonia inlet loads to the hybrid system. However, in the 2nd half of its run, the ammonia elimination capacity of the biofilter was increased abruptly in case of high ammonia inlet loads to the hybrid system. In 6th stage of hybrid system run, total ammonia inlet load attained at ca. 80 g-N/$m^3$/h corresponding to 16 g-N/$m^3$/h of ammonia elimination capacity of the photocatalytic reactor. Then, the remaining ammonia inlet load to the 2nd and main process of the biofilter and its elimination capacity was expected and shown to be ca 64 g-N/$m^3$/h and ca 48 g-N/$m^3$/h, respectively. The ammonia elimination capacity of the biofilter was close to 1,200 g-N/$m^3$/day of the maximum elimination capacity of the investigation performed by Kim et al.