• KOMUNHWA
• /
• no.57
• /
• pp.195-210
• /
• 2001

One kiln site of Koryo Earthenware in Hwakok-ri, Ansung was excavated from March 15, 1999 to May 15, 1999 by Museum Team of Ehwa Women's University, and also other one earthenware kiln site was confirmed as exposed figure on the ground. In this study, the

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.57-61
• /
• 2008

A 1MW class HTS(High-Temperature Superconducting) synchronous motor has been developed. This motor was aimed to be utilized for industrial application such as large motors operating in large plants. The HTS field windings of the developed motor is cooled by way of Neon thermosiphon mechanism and the stator coil is cooled by water through hollow copper conductor. This paper describes performance test results of our motor, which was conducted at steady state in generator mode and motor mode.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.4-37
• /
• 2019

Buncheong Ware, which was produced for approximately 200 years from the end of the Goryeo Dynasty to the beginning of the Joseon Dynasty, was used for royal house and state affairs during the early Joseon Dynasty. Records of Buncheong Ware can be found with Jagiso and Dogiso, considered the place of production, in the 'Sejongsylrok jiliji'. This is notable, unlike celadon and white porcelain. However, compared to Gyeongsangnam-do and Gyeongsangbuk-do, the study of Jagiso and Dogiso in Jeollanam-do and Jeollabuk-do has been unsatisfactory. In this paper, we examined the locations of Jagiso and Dogiso in the Jeollanam-do prefecture. This study is focused on Najumok, located in the western part of Jeollanam-do. The following research results were obtained: First, the locations of Jagiso and Dogiso in nine areas were examined. These nine areas comprised Najumok and its immediate provinces of Haejingun, Yeongamgun, Yeonggwanggun, Hampyeonghyeon, Muanhyeon, Gochanghyeon, Heungdeokhyeon and Jangseonghyeon. Previous research results exist for some of the regions; however, only Buncheong Ware was used to estimate Jagiso and Dogiso. In this paper, we tried to discover a more accurate position of Jagiso and Dogiso through a comparison of the place names recorded in the 'Sejongsylrok jiliji' and the place names recorded in the 'Hoguchoungsu'. Also, pottery-related area names and Buncheong Ware obtained from the field survey were reviewed. Table 2 shows the specific positions of Jagiso and Dogiso in the areas examined. Second, it would appear that pottery was produced not only in Jagiso but also in Dogiso. This is because much of Buncheong Ware was unearthed in Najumok, Yeongamgun, and Muanhyeon Dogiso. However, it was only excavated from the Buncheong Kiln Site in Yucheon Village, Sangweol-ri, Yeongam-gun; there could be limitations regarding to the rest of the areas because only a field survey was conducted, not an excavation. A recent excavation at Donggok Village in Cheongdo-ri, Gimje also confirmed a Buncheong Kiln Site. There were two Buncheong Ware ('公', '上') artifacts excavated from the site, believed to be Gongnapjagi. In addition, Cheongdo-ri, where the Buncheong Kiln Site is located, was found to be an area in Wurimgokmyeon, a former Wurimgok at a Dogiso in Jeonjubu. Consequently, it would seem that Dogiso also produced porcelain (Buncheong Ware). If more data can be obtained from the excavations at sites considered to be Dogiso, the results of Dogiso-related research will be strengthened. Third, in previous surveys, field surveys and excavation surveys were based on estimates using artifacts, but the name of the location of the Jagiso and Dogiso may be confirmed more accurately by tracking the changes in the names of the administrative areas. Therefore, although it is important to conduct research using the results of surveys or excavations, changes in the place names or places related to porcelain must not be overlooked.

• Ceramist
• /
• v.19 no.2
• /
• pp.35-39
• /
• 2016

• 전기산업
• /
• v.8 no.5
• /
• pp.50-73
• /
• 1997

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.449-457
• /
• 2016

A stoneware bottle was recovered from the Incheon Yeongheungdo Shipwreck in 2013. Primary observations showed that this object had a sealed opening and was covered with a foreign material. After it was cleaned via mechanical and chemical methods, wave patterns were observed on the outer surface of the bottle and a yellowish-brown transparent material was found within. In this paper, the process of conserving the stoneware bottle and the analysis conducted on the unknown material found within is explained. The conservation process included steps such as cleaning, desalination and restoration. After of the missing area located at the rim, the original shape of the bottle was made clear. In addition, the unknown inner material was analyzed using FT-IR and GC-MS. Results showed that the material is similar to golden lacquer. It is speculated that the Yeongheungdo Ship had wrecked during the Unified Silla period while carrying a bottle loaded with golden lacquer.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.123-139
• /
• 2016

The excavated potteries of Goryeo Period from the Sandongri archaeological site in Seosan were studied on physicochemical analyses. Surface color of the samples are mainly grayish blue, and showed the natural glaze by melting the body soils during the burning. Partly, swelling surface are observed bloated marks because of blow out gas by burning. The potteries are some possibility of making the similar source clay on the basis of magnetic susceptibilities (about $1{\times}10^{-3}SI\;unit$) and general occurrences. Values of specific gravity, apparent porosity and absorption ratio are divided two groups as highly different cases of bloating surface samples. The source clay of the potteries used mainly microcrystalline clay, the mineral compositions are quartz and some colored minerals. Based on the analysis, the burning temperature of the potteries are assumed that they were around $1,100^{\circ}C$ because detection of quartz and mullite within hard and compact matrices. As geochemical variations of the samples, evolution trends of rare earth, compatible and incompatible elements showed very similar patterns excepting the some major elements, that means the potteries are interpreted to making by elutriation processes using the same raw clays from very similar basement rocks of genetically.

• Journal of the Korean association of regional geographers
• /
• v.8 no.3
• /
• pp.326-346
• /
• 2002

This study examined how the tradition and culture based on the historical experience of the region are regenerated on the making regional identity and symbolic representation in Kurim-ri, Youngam. Kurim has represented the most typical community of the aristocratic class through Daedong-gae of 400 years. But, since 1970's Kurim has undergone a rapid change in regional identity in Kurim ; from the beginning of the spot of Wangin festival to the village of earthenware, the village of pottery culture heritage most recently. The process of history-making around Wangin in Kurim was connected with the strategy of the pottery culture village-making centering around the Youngam Pottery Culture Center. These projects ultimately were resulted in expression the regional identity, 'Kurim of Wang-in'. The regional tradition of Daedong-gae and Wangin in Kurim was linked together solidly through the Wangin festival procedures. And the excavation of a kiln site in Kurim which was going on with the process of history-making at the same time around Wangin in Kurim provided the cultural episode on related 'earthenware' with an archeological foundation. As a consequence of these, the cultural space, the Young-am Pottery Culture Center has came to establish in Kurim finally. However, recently the Kurim of Wangin and Daedong-gae which was representative of regional identity in Kurim is bringing Dosun who was distorted and estranged during the history-making focused on Wangin in Kurim. Now, there are some cultural issues in Kurim ; an authentical settlement of the Youngam Pottery Culture Center in Kurim and how Wangin and Dosun is linked together into the cultural strategy of 'the traditional village, Kurim'.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.3
• /
• pp.32-36
• /
• 2007

On the contrary of a conventional motor with very narrow air-gap. it is difficult to calculate the accurate magnetic field distribution and the performance of an air-cored superconducting motor by 2 dimensional analysis. which does not use high permeability material except outer machine shield. This paper aims to do analysis of magnetic field and force distribution from the 3 dimensional modelling of a 1MW class superconducting synchronous motor. Especially. the field coil composed of Bi-2223 high-temperature superconductor and the outer machine shield are modelled by finite element analysis software according to their structures and the self-inductance and Lorentz force are calculated based on the 3 dimensional magnetic field calculation. Moreover. the influence of an important parameter, synchronous reactance, has been analyzed on the machine performances such as voltage variation and output power.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.3
• /
• pp.23-26
• /
• 2008

Constructions of coated conductor which is differently from Bi-2223 is comprised multiple coatings on a base material or substrate and designed to achieve the highest degree of alignment possibility of the atoms in the superconductor material. In this study, we are measured and analyzed degradations of critical current according to diameter. In addition to study the effects of bending strain, we observed the AC loss of coated conductor and carried out analytical study for relation between Ic degradation and AC loss as well. The measurement of AC loss and numerical calculation was carried out based on Norris theory to compare with experimental results. The relationship between critical current and AC loss of HTS tapes with partial deformation by mechanical stress was studied. These results will amount the most important basis data in the of HTS cable, magnet, etc that winding work is required.