• Review of KIISC
• /
• v.33 no.6
• /
• pp.89-109
• /
• 2023

최근 AI와 로봇기술 등으로 개인정보를 포함한 데이터의 처리가 일상화됨에 따라 한국정부는 개인정보 비식별 조치 가이드라인 및 데이터 3법을 발표함으로써 개인정보 비식별화를 돕고자 하였다. 하지만 복잡한 비식별화 절차와 이의 효과에 대한 불명확함으로 기업들이 개인정보를 포함한 빅데이터의 활용에 어려움을 겪고, 동시에 시민단체나 소비자단체에서는 현 가이드라인에 따른 비식별화 절차가 개인정보를 보호하기에 충분하지 않다고 지적하고 있다. 본고에서는 비식별화 현황과 기술을 검토하고 현 가이드라인의 한계점을 보완 함으로써 데이터 활용 업체와 기관들의 정확한 비식별화를 돕고 빅데이터 활용의 활성화에 기여하고자 한다.

• Economic and Environmental Geology
• /
• v.14 no.3
• /
• pp.193-201
• /
• 1981

The problem of automatic inversion of apparent resistivity sounding curves resulting from horizontally layered earth models is solved using the least-squares technique. This method, which makes use of damped least-squares algorithm in conjunction with digital filtering technique, is found to be speedier and more accurate than the conventional curve-matching method. Four sounding curves were chosen to test the inversion scheme. The analysis of the theoretical sounding data associated with a three-layer model illustrates clear advantages over the conventional curve-matching method. The usefulness of the inversion method is also shown when applied to the actual field data. It was found that the best fit earth models coincide with the subsurface structures confirmed by drilling.

• Journal of the Korean Society for Library and Information Science
• /
• v.33 no.3
• /
• pp.63-86
• /
• 1999

This article investigates the general characteristics and developments of the MARC format for holdings data. It also analyzes the record structure, content designation, and the content of it, mainly based on USMARC and KORMARC formats. Structure and content designation of them are almost same with those of the bibliographic and authority formats. The data fields divided into functional blocks based on their functions, but only 0XX, 5XX, 8XX fields are used in the holdings formats. Record contents of the data in the 008 fields include more elements related to the holdings and acquisition information. Variable fields can be grouped into several blocks, including those for numbers and codes; for notes fields, for location , and for holdings data. Holdings data fields include caption and pattern fields, enumeration and chronology fields, textual holdings fields, and item information fields. This article analyzes the content in each data fields in detail.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.5
• /
• pp.81-90
• /
• 2020

In this paper, we propose setting measurement point in the 3D scan data based on the manual measurement data. The optimal 3D body scan postures and measurement points for automatic measurement of breast were set up. The outer breast point may be different depending on the body shape or standing posture as it is on the line connected from the bisecting point of the lateral waist thickness to front armpit point. Therefore, it is necessary to consider the breast-related outer point proposed in this study. And many researches need to reduce the differences between MAM and 3D dimension items associated with the upper breast point. When measuring depth, the difference by pressing in MAM should be taken into account. And the differences in flexion depending on breast type can make a difference in the 3D measurement. So the measurement method in 3D scan should be further studied depending on the types of breast and verified by multiple subjects.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1074-1079
• /
• 2004

So far, many sensors such as a structured grid pattern generator, a laser, and CCD camera to obtain 3D information have been used, but most of algorithms for a calibration are inefficient since a huge memory and experiment time are required. In this paper, the calibration algorithm of a structured grid pattern based on triangulation method is introduced to calculate 3D information in the real world. The beams generated from structured grid pattern generator established horizontally with the CCD camera are projected on the calibration plat. A CCD camera measures the intersection plane of a projected beam and an object plane. The 3D information is calculated using measured and calibration datum. This proposed method in this paper has advantages such as a memory saving and an efficient experimental time since the 3D information is obtained simply the triangulation method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.619-622
• /
• 2003

3차원 모델링 데이터를 VRML로 가시화하기 위해서는 용량 최적화와 실시간 렌더링이 중요하다. 실시간 렌더링은 객체에 따른 폴리건 수에 영향을 받게 되는데, 폴리건 수가 작으면 렌더링의 질이 저하되고 폴리건 수가 많아 데이터 용량이 크면 오브젝트 표현력은 좋으나 높은 대역폭을 필요로 하여, 디더링 철상이 발생과 실시간 렌더링이 어렵게 된다. 그러므로 네트워크 가상공간 내의 오브젝트는 최소의 폴리건을 사용해 메쉬를 단순화 시켜주는 방법으로 데이터 용량을 줄여주는데, 용량은 저하되지만 블록화 현상이 발생하여 저급한 렌더링이 된다. 본 논문에서는 모델링 데이터의 폴리건 수를 줄여 데이터 용량을 최적화 하고, 폴리건의 단순화에서 생기는 블록화 현상을 제거할 수 있는 방법으로 B-스플라인 곡선과 명암처리 기법인 고라우드 명암법을 이용하여 경계면을 부드럽게 처리할 수 있는 기법을 제시한다.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1996

In ray tracing of 3D volume data, the color of each pixel in the image is typically obtained by accumulating the contributions of sample points on the ray cast from the pixel point. This accumulation is most naturally represented by integration. In most methods, however, it is done by numerical summation because analytical solution to the integration are hard to find. This paper shows that a semi-analytical solution can be obtained for a typical ray tracing of volume data. Tentative conclusions about the significance and usefulness of our approach are presented based on our experiments.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.183-189
• /
• 2006

A series of substituted styryl 4-methoxy-1-naphthyl ketones [(2E)-1-(4-methoxy-1-naphthyl)-3-phenyl-2-propen-1-ones] were synthesized using facile method of microwave assisted condensation reaction. The yield of chalcones is more than 90%. They are characterized by their physical constants, micro analysis, infrared (KBr, 4000-400 cm？1) and NMR both 1H and 13C spectral data. From infrared spectra, the s-cis and s-trans stretching vibrations of carbonyl group, from NMR spectra the ethylenic proton and carbon chemical shifts (ppm) are assigned. These spectral data are correlated with various Hammett substituent constants. From the results of statistical analysis the effect of substituents on CO, ？ and ？ proton and carbons are explained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.393-400
• /
• 2009

Recently demand for the 3D modeling technology to reconstruct real world is getting increasing. However, existing geospatial data are mainly based on the 2D space. In addition, most of the geospatial data provide geometric information only. In consequence, there are limits in various applications to utilize information from those data and to reconstruct the real world in 3D space. Therefore, it is required to develop efficient 3D mapping methodology and data for- mat to establish geospatial database. Especially digital elevation model(DEM) is one of the essential geospatial data, however, DEM provides only spatially distributed 3D coordinates of the natural and artificial surfaces. Moreover, most of DEMs are generated without considering terrain properties such as surface roughness, terrain type, spatial resolution, feature and so on. This paper suggests adaptive and flexible geospatial data format that has possibility to include various information such as terrain characteristics, multiple resolutions, interpolation methods, break line information, model keypoints, and other physical property. The study area was categorized into mountainous area, gently rolling area, and flat area by taking the terrain characteristics into account with respect to terrain roughness. Different resolutions and interpolation methods were applied to each area. Finally, a 3D digital map derived from aerial photographs was integrated with the geospatial data and visualized.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.305-305
• /
• 2004

쾌속조형 기술은 3차원 CAD 데이터를 일정한 두께 간격으로 슬라이싱한 각 층을 다양한 방법으로 만들고, 이러한 층을 한층씩 적층하여 원하는 3차원 형상을 신속하게 제작하는 기술이다. 쾌속 조형법은 초기에는 광(beam)에 의해 형상이 만들어진다고 하여 광조형법이라고 불렸다. 그 후 시작품(Prototype)을 신속(Rapid)하게 제작할 수 있다는 사실로부터 'Rapid Prototyping' 또는 '쾌속 조형법' 이라고 불려지게 되었다.(중략)