• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.336-341
• /
• 2016

This paper presents an implementation of a communication network in wind turbines, which exploits the power-line communication system (PLC). We used an inductive coupling unit and a multi-interface device to connect a data-communication terminal to the power line, to ensure that stable communication was possible at various electric current and voltage values of the generator. The results of the operation tests conducted on an operational wind turbine showed that the implemented PLC demonstrated a transmission rate of at least 43 Mbps with a 100% success rate. Moreover, a real-time image was transmitted. Thus, the system could be a useful alternative for implementing a communication network in wind turbines that does not require additional channels. Since the presented system is easy to implement, and can support various interfaces for data communication, it will be quite useful when a real-time monitoring system is launched in wind turbines.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.830-835
• /
• 2016

With the relaxation of regulations on unmanned aerial vehicles (UAVs) in the USA, the development of related industries is expected. Hence, it is anticipated that the number the UAVs will reach approximately 600,000 in the USA in 2017. However, automated flights of commercial UAVs are restricted owing to concerns about accidents. To deal with the possibility of collisions, several studies on collision prevention and the routing of UAVs have been conducted. However, these studies do not deal with various situations dynamically or provide efficient solutions. Therefore, we propose a centralized routing method for the UAV that uses vehicular networks. In the proposed scheme, vehicular networks regard UAVs as data packets to be routed. Accordingly, the proposed method reduces UAV processing power required for route searches. In addition, the routing efficiency for UAV flight paths can be improved since congestion can be minimized by using a vehicular network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.677-684
• /
• 2002

Today's Internet does not have efficient traffic engineering mechanism to support QoS for the explosive increasing internet traffic such as various multimedia traffic. This functional shortage degrades prominently the quality of service, and makes it difficult to provide multi-media service and real-time service. Various technologies are under developed to solve these problems. IETF (Internet Engineering Task Force) developed the MPLS (Multi-Protocol Label Switching) technology that provides a good capabilities of traffic engineering and is independent layer 2 protocol, so MPLS is expected to be used in the Internet backbone network$\^$[1][2]/. The faults occurring in high-speed network such as MPLS, may cause massive data loss and degrade quality of service. So fast network restoration function is essential requirement. Because MPLS is independent to layer 2 protocol, the fault detection and reporting mechanism for restoration should also be independent to layer 2 protocol. In this paper, we present the experimental results of the MPLS OAM function for the performance monitoring and fault detection 'll'&'ll' notification, localization in MPLS network, based on the OPNET network simulator

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.60-64
• /
• 2006

In typical video streaming services such as MPEG encoded video, the transmission data sizes change depending on the frame types and the required bandwidth for QoS support also changes as time passes. Accordingly, in video streaming services using the Internet it could happen that the video services stop occasionally due to instantaneous deficiencies of the required bandwidth under unexpected congestion even if the highest priority is allocated to the service by network administration. In this paper, we investigate several methods for bandwidth allocation and traffic engineering to support MPEG video traffic and propose a new method to reduce the transmission delay and enhance the throughput, there by provisioning the QoS requirements. In the proposed scheme, LSPs are established based on temporal variation patterns of the Internet traffic and the CQ_LLQ policing scheme is applied for traffic shaping at the ingress routers. Finally we verified the performance of the proposed scheme via computer simulations using OPNET.

• Plant Journal
• /
• v.17 no.3
• /
• pp.37-41
• /
• 2021

P&ID((Piping and Instrument Diagram) is a key drawing in the engineering industry because it contains information about the units and instrumentation of the plant. Until now, simple repetitive tasks like listing symbols in P&ID drawings have been done manually, consuming lots of time and manpower. Currently, a deep learning model based on CNN(Convolutional Neural Network) is studied for drawing object detection, but the detection time is about 30 minutes and the accuracy is about 90%, indicating performance that is not sufficient to be implemented in the real word. In this study, the detection of symbols in a drawing is performed using 1-stage object detection algorithms that process both region proposal and detection. Specifically, build the training data using the image labeling tool, and show the results of recognizing the symbol in the drawing which are trained in the deep learning model.

• 한국정보교육학회:학술대회논문집
• /
• 2021.08a
• /
• pp.289-294
• /
• 2021

With the development of artificial intelligence, a wave of the 4th industrial revolution is taking place around the world. With the technologies such as big data and Internet of Things-based artificial intelligence, we are heading to a hyper-connected society where everything converges into one. Accordingly as educational talents in the era of artificial intelligence, we are pursuing the cultivation of creative convergence-type talents and emotional creative talents. With human creativity and emotion at the center, we should be able to collaborate with artificial intelligence and create new things by converging knowledge in various fields. By developing a program that combines humanities-oriented Korean language with engineering-oriented artificial intelligence, this research attempted to help students experience solving problems creatively by combining humanistic knowledge with engineering thinking skills. The educational program consists of two kinds of contents(i.e., "Books with AI" and "A Play with AI") and 15 classes that provide students with opportunities to solve humanities problems with artificial intelligence.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.86-93
• /
• 2015

Recently, the development of Maritime Service Portfolios (MSPs) for the safe navigation of ship has been discussed internationally. For the successful service of the MSPs, first of all, studies for the standardization about the structure and data structure of MSPs should be preceded. Also, it is necessary to evaluate and assess whether the services are effective for safe navigation, and provided data and portrayal methods are proper. However, because great dangers will be accompanied when untested MSPs about their effectiveness and safety are applied in real ship navigation, it is necessary that effectiveness and safety of the MSPs should be proven under various navigational conditions and environments by simulation. In this paper, we propose a 3D navigation simulation system using desktop PC environment, which is proper for evaluating the effectiveness of MSPs. The system consists of three modules which are simulation scenario editor, 3D visualization of navigational environment and 2D navigational equipment. The scenario editor module provides an environment setting for simulation, such as properties, routes and positions of vessels and aids to navigations. It also provides functions to create a scenario for the simulation to operate. Additionally, the 3D visualization module provides 3D navigational environment which shows interplay between geographical and navigational environment based on the created scenario. The 2D navigational equipment module provides visualization functions of various navigational equipment, shows the interaction between ship's navigational equipment and ship's environment. The simulation scenario, in which various kinds of ships are routing in the port, is created by the developed simulation system, and experimented whether this developed system is appropriate to evaluate and assess the MSPs developed by the International Maritime Organization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.323-329
• /
• 2017

Nowadays, considering global warming and enhanced prohibition to discharge pollutants at sea, all of existing operation-ships must lead to the reduction of fuel consumption. International standards of International Maritime Organization and EU rules governing harbor pollutants are being strengthened. Therefore, ship-owners and operators are seeking ways to reduce $CO_2$, SOx, and NOx emissions. Although world trade continues to expand, total fuel usage for sea transport tends to diminish. However, ICS(International Chamber of Shipping) has set a goal of reducing $CO_2$ emissions from shipping by 50% until 2050. In addition, with respect to the Paris Climate Change Accord in 2015, IMO proposes to set up a reduction target of GHG emission from existing operation-ships. For setting up a reduction target of GHG from international maritime transport, "A data collection system for fuel consumption" will be introduced in the near future. In order to effectively reduce the use of fuel in a ship in accordance with the trend of compulsory fuel saving from operation ships, this paper suggested adoption of an Incentive-Penalty scheme based on Emission-Trading-Scheme, Carbon Tax, and basic calculation formula after verifying the EEOI level for a year.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.463-467
• /
• 2015

When unforeseen accidents occur in a ship, it is important to save passengers safely and remove them from the accident area quickly. To solve such a situation, site information of passengers on board always must be identified. This paper implemented a site monitoring of crews and passengers based on the BLE and PLM combination, to prepare for unexpected accidents of the ships. This system was composed of BLE tag for crews, passengers and each room, PLM networks, data server, and monitoring PC. In this system, site information derived from the tag attached to the bodies and cabins of crews and passengers are transmitted through a power line network, and monitored on the screen of a monitoring PC. The proposed system guides them into the only authorized area considering the ship security and passengers' safety, and even has a special alarm call to warn them after entering an unauthorized area. This system enables the BLE-embedded tag battery to use for a long time because the BLE consumes low electric power, and can gain an economic advantage.