• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1543-1549
• /
• 1997

In this paper, rank-based nonparmetric detection of composite signals in additive noise is considered. Based on signs and ranks of observations, the locally optimum detector is deived for weak-signal detection under any specified noise probability density funhction. This detector has similarities to the locally optimum detector for comjposite signals in additive noise. The asymptotic performance of this nonparametric detector is shown to be as good as that of the locally optimum detector.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.11
• /
• pp.2861-2873
• /
• 1997

An FPU(Floating Point unit) is the principle component in high performance computer and is placed on a chip together with main processing unit recently. As a Processing speed of the FPU is accelerated, the rounding stage, which occupies one of the floating point Processing steps for floating point operations, has a considerable effect on overall floating point operations. In this paper, by studying and analyzing the processing flows of the conventional floating point adder/subtractor, multipler and divider, which are main component of the FPU, efficient rounding mechanisms are presented. Proposed mechanisms do not require any additional execution time and any high speed adder for rounding operation. Thus, performance improvement and cost-effective design can be achieved by this approach.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.44-47
• /
• 1998

나눗셈 알고리즘은 다른 덧셈이나 곱셈 알고리즘과 비교하여 복잡하고, 수행빈도수 적다는 이류로 그 동안 고속 나눗셈의 하드웨어 연구는 활발하지 않았다. 그러나 멀티미디어의 발전으로 고속 나눗셈의 필요성 및 전체적인 수행 시간 향상을 위해 고속 나눗셈 연산기의 중요성은 더욱 부각되고 있다. 그러나 칩의 크기는 제작 단가와 깊은 관련이 있기 때문에 고속 나눗셈 연산기를 칩으로 제작할 때 요구되는 성능과 비용을 만족하기 위한 적절한 분석이 필요하다. 본 논문은 자릿수 순환(Digt Recurrence) 알고리즘에서 속도가 빠른 높은 자릿수 이용(Very-High Radix) 알고리즘을 기반으로 최적화된 자릿수 (Radix) 범위를 제시하였다. 그리고 변환요소 (Scaling Factor)를 전처리(Pre-processing)하여 연산의 주기를 감소하고, 크기의 문제를 해결하기 위해서 상수표 대신 제어(Control)방법으로 값을 구하는 방법을 설계하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.2
• /
• pp.72-81
• /
• 2002

A new high-performance DSP architecture is proposed, which behaves as a coprocessor of a 32bit microcontroller. Because the proposed DSP architecture is a dual MAC(Multiply and Accumulate) DSP architecture, it can process efficiently a number of SOP(sum of product) operations used in many DSP applications. In order to efficiently perform other operations such as pure additions without any restriction, a MAC is composed of a multiplier and a ALU placed in parallel. In addition, it is a 3-way superscalar architecture, which can issue 3 instructions at a time. The benchmark results with 3 thor dual MAC DSPs show that the proposed DSP has the best performance. Futhermore, it is proven that the proposed DSP is more efficient in memory usage, although the performance is comparable in some algorithms such as Viterbi decoding and FFT butterfly.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.392-399
• /
• 2015

This paper proposes a unified $4{\times}4$ transform architecture for HEVC and VP9 codec to reduce hardware size. It performs HEVC $4{\times}4$ IDCT, HEVC $4{\times}4$ IDST, VP9 $4{\times}4$ IDCT, and VP9 $4{\times}4$ IADST in a unified hardware. HEVC $4{\times}4$ IDCT and VP9 $4{\times}4$ IDCT have same IDCT computation except for the scales of coefficients. Similarly, HEVC $4{\times}4$ IDST and VP9 $4{\times}4$ IADST have same IDST computation except for the scales of coefficients. Furthermore, IDCT and IDST have quite a lot of similarity, so they can share some hardwares in common. So the proposed hardware performs all 4 operations in a unified hardware, where each operation has its own multiplication coefficients with shared butterfly adders. The synthesized block in 0.18 um technology is 6,679 gates, and the gate count is reduced by 25.3% in comparison with conventional designs.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.59-68
• /
• 2002

In this paper, we design the two-dimensional Discrete Wavelet Transform (2D DWT) filter that is widely used in various applications such as image compression because it has no blocking effects and relatively high compression rate. The filter that we used here is two-channel four-taps QMF(Quadrature Mirror Filter) Lattice filter with PR (Perfect Reconstruction) property. The proposed DWT architecture, with two consecutive inputs shows an efficient performance with a minimum of such hardware resources as multipliers, adders, and registers due to a simple scheduling. The proposed architecture was verified by the RTL simulation, and utilizes the hardware 100%. Our architecture shows a relatively high performance with a minimum hardware when compared with other approaches. An efficient memory mapping and address generation techniques are introduced and the fixed-point arithmetic analysis for minimizing the PSNR degradation due to quantization is discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.233-239
• /
• 2001

Among the operations in frequency domain for ADSL G.LITE Modem to perform, FFT and FEQ are most computation-intensive part, of which many researches have been focused on the efficient implementation. Previous papers suggested hardwares suitable for ADSL G.DMT system, which is not feasible for simple G.LITE system. The analysis of frequency domain operations and computational efficiency according to the allocation of hardware resources is performed in this paper. The suggested processor has the structure of one real multiplier and two real adders connected in parallel, which can perform the operations efficiently through the pipeline- and/or parallel-type job scheduling. The suggested processor uses less hardware resources than Kiss\`s ALU structure or FFT/IFFT processor suggested by Wang, so the suggested one is more suitable for G.LITE system than previous works.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.17-25
• /
• 1999

This paper proposes a new bit-serial multiplier/divider architecture to reduce the hardware complexity significantly and to maintain the same number of cycles compared with existing architectures. Since the proposed bit-serial multiplier/divider architecture does not extend the number of bits in registers and an adde $r_tractor to calculate a partial product or a partial remainder, the hardware overhead can be greatly reduced. In addition, the proposed architecture can perform an additio $n_traction and a shift operation in parallel and the number of cycles for $\textit{N}$-bit multiplication and division for the proposed circuits is $\textit{N}$ and $\textit{N}$ + 2, repectively. Thus, the number of cycles for multiplication and division is the same compared with existing architectures. The SliM Image Processor employs the proposed multiplier/divider architecture and proves the performance of the proposed architecture.cture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.75-82
• /
• 2000

In this paper, a new low power 16-bit ALU has been designed, fabricated and tested at the transistor level. The designed ALU performs 16 instructions and has a two-stage pipelined architecture. For the reduction of switched capacitance, the ELM adder of the proposed ALU is inactive while the logical operation is performed and P(propagation) block has a dual bus architecture. A new efficient P and G(generation) blocks are also proposed for the above ALU architecture. ELM adder, double-edge triggered register and the combination of logic style are used for low power consumption as well. As a result of simulations, the proposed architecture shows better power efficient than conventional architecture$^{[1,2]}$ as the number of logic operation to be performed is increased over that of arithmetic to logic operation to be performed is 7 to 3, compared to conventional architecture. The proposed ALU was fabricated with 0.6${\mu}m$ single-poly triple-metal CMOS process. As a result of chip test, the maximum operating frequency is 53MHz and power consumption is 33mW at 50MHz, 3.3V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.523-531
• /
• 2005

We derive decision regions of the maximum likelihood(ML) and suboptimum ML(S-ML) detectors in the first order moving average(FOMA) of an impulsive process. The ML and S-ML detectors are compared in terms of the bit-error-rate in the antipodal signaling system. Numerical results show that the S-ML detector, despite its reduced complexity and simpler structure, exhibits practically the same performance as the optimum ML detector. It is also shown that the performance gap between detectors for FOMA and independent and identically distributed noise becomes larger as the degree of noise impulsiveness increases.