• Ocean and Polar Research
• /
• v.25 no.2
• /
• pp.183-200
• /
• 2003

In order to assess the ecological changes induced by organic pollutants of the Shihwa Lake, BPI (Benthic Pollution Index) based on the benthic faunal community was employed. It was modified from Infaunal Trophic Index (ITI), and recommended as a pollution detecting method for the environmental assessment. The BPI values were calculated from the benthos data, which were collected for three terms: in 1980, before the Shihwa Lake was built up; in 1994-1997, which the Shihwa Lake was completely isolated from the outer seawater; in 1997-1999, after inflow of the outer seawater. Since the Shihwa Dike was constructed in February 1994, the pollution intensity of the lake had been increased from the narrow and inner part of the former Gyeonggi Bay and spread fast along the coast line of the Shihwa Lake. Then, in 1996 it showed the very high BPI levels all around the Lake. This serious polluted condition had been lasted till 1997, when the inflow of the seawater was begun. In 1998, from the nearest part of the Shihwa Gate, the BPI levels gradually became low in most area of the Lake, except its inner and narrow part. These greatly lowered BPI levels mean that the seawater inflow could be assumed to affect positively in the lake. Furthermore, BPI gave the same results from the other environmental assessment based on the abundance and the species richness of macrobenthic community. It shows that BPI could be useful as an effective method to assess the marine environment and evaluate the status of environmental conditions.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2009

Recently, the number of high-rise buildings being built in Korea by major construction companies for residential and commercial use has been increasing. When constructing a high-rise building, it is necessary to apply massive amounts of concrete to form a mat foundation that can withstand the huge load of the upper structure. However, it is of increasing concern that due to limitations in terms of the amount of placing equipment, available job-sites and systems for mass concrete placement in the construction field, it is not always possible to place a great quantity of concrete simultaneously in a large-scale mat foundation, and for this reason consistency between placement lift cannot be secured. In addition, a mat foundation Is likely to crack due to the stress caused by differences inhydration heat generation time. To derive a solution for these problems, this study provides test results of a hydration heat crack reduction method by applying placement lift change and setting time control with a super retarding agent for mass concrete in a large-scale mat foundation. Mock-up specimens with different mixtures and placement liftswere prepared at the job-site of a newly-constructed high-rise building. The test results show that slump flow of concrete before and after adding the super retarding agent somewhat Increases as the target retarding time gets longer, while the air content shows no great difference. The setting time was observed to be retarded as the target retarding time gets longer. As the target retarding time gets longer, compressive strength appears to be decreased at an early stage, but as time goes by, compressive strength gets higher, and the compressive strength at 28 days becomes equal or higher to that of plain concrete without a super retarding agent. For the effect of placement lift change and super retarding agent on the reduction of hydration heat, the application of 2 and 4 placement lifts and a super retarding agent makes it possible to secure consistency and reduce temperature difference between placement lifts, while also extending the time to reach peak temperature. This implies that the possibility of thermal crack induced by hydration heat is reduced. The best results are shown in the case of applying 4 placement lifts.

• Journal of Technology Innovation
• /
• v.2 no.1
• /
• pp.1-57
• /
• 1994

본 고는 지속적 개발 론에 입각한 적극적인 에너지수요 관리정책을 추진한다는 전제하에 2001년과 2006년의 우리 나라 가정부문 전력수요를 전망하고자 한다. 본 고는 지속적 개발 시나리오를 추정함에 있어서 기존의 계량모형보다 일종의 공학적 모형인 공정분석(process analysis)을 선호한다. 계량모형이 주로 과거 수요의 소득 및 가격 탄성 치를 바탕으로 미래의 수요를 예측하는데 비하여 공정분석모형은 기술발전에 따른 미래의 효율변화(향상)를 비교적 잘 반영할 수 있기 때문이다. 본 고는 덴마크공과대학교 Norgard 교수팀이 개발한 모형을 도입하여 분석모형(수식 (6))을 전력수요 = 기기 수 $\times$ 전력서비스$\times$ 전력집약도와 같이 설정하고 이를 사용하여 냉장고, 텔레비전, 조명 기기, 난방기기 등과 같은 전력사용 기기 별로 2001년과 2006년이 전력수요를 전망하였다. 본 고는 전력수요를 전력사용 기기의 사용용량(300리터 용량의 냉장고 등)과 사용시간을 나타내는 전력서비스와 전력 서비스당 필요 전력사용량을 나타내는 전력집약도로 나누어 구분하고 있는 모형을 이용함으로써 소득향상효과와 함께 기술발전에 따른 효율개선효과를 분석할 수 있다. 1) 생활수준 향상에 따라 전력서비스는 지금과 같이 증가한다, 2) 현실적으로 가능한 범위 내에서 전력사용 기기에 대한 최저 에너지 효율 제를 실시한다, 3) 현재 사용중인 기기 들은 원칙적으로 수명이 다한 후 고효율 기기 들로 자연 교체한다, 4) 최저 에너지 효율 제를 제외한 다른 제도 및 정책개선, 사용자의 에너지소비형태 개선에 따른 절전 잠재 량을 고려하지 않는다 등의 가정 하에 전력수요를 추정한 결과 1992년에 796 GWh(100)이었던 우리 나라 가정부문 전력수요는 2001년과 2006년에 29,237 GWh(134)와 33,118 GWh(152)로 각각 34%와 52%증가할 것으로 나타났다. 이 경우 1992년부터 2006년까지 가정용 전력수요 증가율은 연평균 3%로 추정된다. 기기의 서비스(가구수$\times$기기의 보급 율$\times$기기의 전력서비스)가 소득향상에 따라 증가하는데도 불구하고 전력수요의 증가율이 GDP(같은 기간 동안 연평균 증가율 5.7%)보다 매우 낮은 것은 기기의 대형화와 기기의 보급을 증가에 따른 전력의 추가수요가 기기의 에너지효율 개선으로 대부분 상쇄될 것이기 때문이다. 향후 10년 내에 기기에 따라 전력사용량을 25%~50%정도까지 줄일 수 있을 것으로 분석된다. 기술발전에 따른 기기의 에너지효율 개선효과는 본 고의 2006년도 가정용 전력수요의 전망치 33,118 GWh가 기존방식에 의한 한전의 전망치 61,155 GWh의 54%수준밖에 되지 않는데 서도 잘 나타나고 있다. 한편 본 고는 경제성장과 환경보존을 동시에 달성할 수 있는 지속적 개발의 실천방안으로서 에너지 수요관리를 논하고자 한다. 고효율 기기의 개발과 조기도입을 촉진시키는 에너지 수요관리 통하여 우리는 에너지효율을 대폭 개선시키며 대기오염 배출량도 대폭 줄일 수 있다. 본 고는 에너지 공급관리(공급확충)위주에서 에너지 수요관리위주로서의 에너지정책 전환은 불가피하다고 판단한다. 에너지 공급시스템보다 에너지 수요시스템위주로 전체 에너지시스템을 획기적으로 개선시키기 위해서는 최저 에너지효율제의 광범위한 실시와 함께 고효율 기기의 개발과 보급에 필요한 유인책의 도입, 고효율 기기와 에너지의 효율적 이용에 대한 정보 등이 필요시 되고 있다. 우리 나라의 경우 현재의 산업구조와 기술수준을 고려하여 에너지 효율의 기준을 미국보다 다소 낮게 설정한다면 최저 에너지효율제의 도입이 문제가 되지 않을 것으로 판단된다. 본 고는 고효율 기기의 개발과 조기도입을 지원하기 위한 가칭 대기환경보존 및 에너지 수요관리기금의 창설을 제안한다. 전력부문의 경우 기금은 1. 탄소세, 2. 전력소비에 대한 수요 관리 세의 도입 혹은 3. 한국전력공사 전력판매수입의 일정 분으로 조성될 수 있을 것으로 본다. 예를 들어 선진국들이 탄소세를 예정대로 도입한다는 전제하에 우리 나라가 2000년을 기준으로 탄소 톤당 8달러(석유 배럴 당 85센트)의 탄소세를 도입한다면 연간 7억 2,000만 달러(약5,760억 원)규모의 기금을 조성할 수 있다. 이 중 연간 2,000억 원 정도를 고효율 기기의 개발과 조기도입에 지원한다면 우리 나라 에너지 시스템 효율은 대폭 개선될 수 있을 것으로 예상된다.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.11-26
• /
• 2021

With the increasing demand for office space, there have been questions on how office rent distribution produces a change in the urban spatial structure in Seoul. The purpose of this paper is to investigate a relative price gradient and to present a time-series model that can quantitatively explain the dynamic changes in the urban spatial structure. The analysis was dealt with office rent above 3,306 m² for the past 10 years from 1Q 2010 to 4Q 2019 within Seoul. A modified repeat sales model was employed. The main findings are briefly summarized as follows. First, according to the estimates of the office price gradient in the three major urban centers of Seoul, the CBD remained at a certain level with little change, while those in the GBD and the YBD continued to increase. This result reveals that the urban form of Seoul has shifted from monocentric to polycentric. This shows that the spatial distribution of companies has gradually accelerated decentralized concentration implying that the business networks have become significant. Second, contrary to small and medium-sized office buildings that have undertaken no change in the gradient, large office buildings have seen an increase in the gradient. The relative price gradients in small and medium-sized buildings were inversely proportional among the CBD, the GBD, and the YBD, implying their heterogeneous submarkets by office rent movements. Presumably, those differences in the submarkets were attributed to investment attraction, industrial competition, and the credit and preference of tenants. The findings are consistent with the hierarchical system identified in the Seoul 2030 Plan as well as the literature about Seoul's urban form. This research claims that the proposed method, based on the modified repeat sales model, is useful in understanding temporal dynamic changes. Moreover, the findings can provide implications for urban growth strategies under rapidly changing market conditions.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.6
• /
• pp.489-495
• /
• 2020

Whereas the control of the hydration heat in mass concrete has been important as the concrete structures enlarge, many conventional strategies show some limitations in their effectiveness and practicality. Therefore, In this study, as a solution of controling the heat of hydration of mass concrete, a method to reduce the heat of hydration by controlling the hardening of cement was examined. The reduction of the hydration heat by the developed Phosphate Inorganic Salt was basically verified in the insulated boxes filled with binder paste or concrete mixture. That is, the effects of the Phosphate Inorganic Salt on the hydration heat, flow or slump, and compressive strength were analyzed in binary and ternary blended cement which is generally used for low heat. As a result, the internal maximum temperature rise induced by the hydration heat was decreased by 9.5~10.6% and 10.1~11.7% for binder paste and concrete mixed with the Phosphate Inorganic Salt, respectively. Besides, the delay of the time corresponding to the peak temperature was apparently observed, which is beneficial to the emission of the internal hydration heat in real structures. The Phosphate Inorganic Salt that was developed and verified by a series of the aforementioned experiments showed better performance than the existing ones in terms of the control of the hydration heat and other performance. It can be used for the purpose of hydration heat of mass concrete in the future.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.22-43
• /
• 2023

This paper deals with the stone standing Avalokitesvara statue in Jeonghyesa Temple that was created by Mangong in 1924. The stone standing Avalokitesvara statue of Jeonghyesa Temple is the earliest extant Buddha statue produced by Mangong, and symbolism was given to Jeonghyesa in the process of its reconstruction. So far, there has been no study that has approached ideas and beliefs through Buddhist studies led by Mangong and specific relics. In order to proceed with this study, Mangong's legal words and anecdotes and newspaper articles during the Japanese colonial era were used to trace the dynamics of Jeonghyesa and Sudeoksa during Mangong's reign, and to investigate the effects obtained from the creation of the large Bodhisattva statue and the meaning of its location. In addition, an interview was attempted with the descendants of master, who were in charge of the sculpture at the time, to confirm the exact construction period and the list of craftsmen. It is judged that the stone standing Bodhisattva statue of Gwanchoksa Temple has been influenced by the double covering and square crown seen in the standing stone statue of Avalokitesvara Bodhisattva of Jeonghyesa Temple, the large hands compared to the body, the proportion between the head and the body, and the sense of enormity felt in the body like a stone pillar. Therefore, we looked at how the standing stone Bodhisattva statue of Gwanchoksa Temple, which was produced in the early Goryeo Dynasty, could have influenced the creation of the Bodhisattva statue in the modern period. A multilateral analysis was attempted on how the image of the Gwanchoksa Bodhisattva statue, which was used as a symbol representing Chungcheongnam-do in the Chosun Exposition held in 1929 and the visit to Gwanchoksa Temple, which began with the laying of the railroad during the Japanese colonial period, was used from the viewpoint of the succession and transformation of the style. With this study as an opportunity, it is hoped that the understanding of the prehistoric Mangong representing the modern period and the horizon of Korean Buddhist sculpture research in the modern period will be broadened.

• Journal of Wetlands Research
• /
• v.26 no.1
• /
• pp.21-31
• /
• 2024

Macromia daimoji Okumura, 1949 was designated as an endangered species and also categorized as Class II Endangered wildlife on the International Union for Conservation of Nature (IUCN) Red List in Korea. The spatial distribution of this species ranged within a region delimited by northern latitude from Sacheon-si(35.1°) to Yeoncheon-gun(38.0°) and eastern longitude from Yeoncheon-gun(126.8°) to Yangsan-si(128.9°). They generally prefer microhabitats such as slowly flowing littoral zones of streams, alluvial stream islands and temporarily formed puddles in the sand-based lowland streams. The objectives of this study were to analyze the similarity of benthic macroinvertebrate communities in M. daimoji habitats, to predict the current potential distribution patterns as well as the changes of distribution ranges under global climate change circumstances. Data was collected both from the Global Biodiversity Information Facility (GBIF) and by field surveys from April 2009 to September 2022. We adopted MaxEnt model to predict the current and future potential distribution for M. daimoji using downloaded 19 variables from the WorldClim database. The differences of benthic macroinvertebrate assemblages in the mainstream of Nakdonggang were smaller than those in its tributaries and the other streams, based on the surrounding environments and stream sizes. MaxEnt model presented that potential distribution displayed high inhabiting probability in Nakdonggang and its tributaries. Applying to the future scenarios by Intergovernmental Panel on Climate Change (IPCC), SSP1 scenario was predicted to expand in a wide area and SSP5 scenario in a narrow area, comparing with current potential distribution. M. daimoji is not only directly threatened by physical disturbances (e.g. river development activities) but also vulnerable to rapidly changing climate circumstances. Therefore, it is necessary to monitor the habitat environments and establish conservation strategies for preserving population of M. daimoji.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.457-491
• /
• 2008

As stage equipment export markets along with special lighting service lack the attraction for already globally established businesses, such markets can be viewed as an advantageous opportunity for SMEs as in general. In reality, global businesses tend to focus on large construction projects and this indicates relatively less substantial markets such as stage equipment and special lighting service export are more suitable for SME businesses. However, possible problems may be recognized as following; doubtful capabilities by such businesses to join in the vast and competitive global market and pursue manufacturing and service based export. This point is also supported by the fact that such in general SME businesses have substantially less experience in exporting products and services abroad. Realizing the distinctive features of the Korean economy, it is unarguable that every sector and area of global market must be regarded and monitored closely. Hence, it can be argued that there is an imminent need for establishment of supportive institution to assist export process of combination of stage equipments and special lighting service. This study emphasizes the need to improve export process of stage equipments, special lighting services as well as other related products and services which have been focused in domestic market only until now. Further, it also analyzed the potential prospect of such direction reconciling current crisis our manufacturing industry is facing. Even though it maybe regarded as one of the niche market for export of Korea in the short term view, stage equipment and special lighting service industry may rapidly grow as the global cultural industries have grown along with the increase of national income earnings overall. Due to such advantageous features, it can be expected that such industries will show strong growth in the near future. After analyzing the fact that Korea's plants (eg. powerplants) export sector is at its boom, there is a need to transform stage equipment and special lighting service export market into a primary market from a secondary(niche) market for SMEs. This study is viewed from the Korean economic and export sector aspect in the aim of seeking a solution to conquest our realistic limit in our export sector by developing a suitable export model. There have been cases of very few attempts to expand abroad by SMEs who have failed miserably due to their failure to adapt to foreign culture, practice and languages as well as substantial lack in experience in export marketing. Despite this, neglecting our manufacturing industry as it is which is showing its limit and problems is out of option therefore, it is imminent that we come up with an effective measure to address this problem and service export can be suggested as one of them. This study reveals manufacturing-service export model of stage equipment and special lighting service and its related areas is recognized as a field with a very strong future and furthermore, it is expected to bring synergy effects in manufacturing and services sector as well. Further, the operation strategy contains combination, composition and fusion(convergence) of manufacturing and service sectors which could derive various of export products which displays greater success probability or this export model. The outcome of this research is expected to become a useful source for enterprises related to such industry which are seeking a possible global expansion. Furthermore, it is also expected to become a catalyst which fastens the process of global expansion and not only that, we are firmly assured that this study will become an opportunity to improve our current policies and institutions related to this area's export market.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.4-19
• /
• 2017

Kim Jeong-gi (pen-name: Changsan, Mar. 31, 1930 - Aug. 26, 2015) made a major breakthrough in the history of cultural property excavation in Korea: In 1959, he began to develop an interest in cultural heritage after starting work as an employee of the National Museum of Korea. For about thirty years until he retired from the National Research Institute of Cultural Heritage in 1987, he devoted his life to the excavation of our country's historical relics and artifacts and compiled countless data about them. He continued striving to identify the unique value and meaning of our cultural heritage in universities and excavation organizations until he passed away in 2015. Changsan spearheaded all of Korea's monumental archeological excavations and research. He is widely known at home and abroad as a scholar of Korean archeology, particularly in the early years of its existence as an academic discipline. As such, he has had a considerable influence on the development of Korean archeology. Although his multiple activities and roles are meaningful in terms of the country's archaeological history, there are limits to his contributions nevertheless. The Deoksugung Palace period (1955-1972), when the National Museum of Korea was situated in Deoksugung Palace, is considered to be a time of great significance for Korean archeology, as relics with diverse characteristics were researched during this period. Changsan actively participated in archeological surveys of prehistoric shell mounds and dwellings, conducted surveys of historical relics, measured many historical sites, and took charge of photographing and drawing such relics. He put to good use all the excavation techniques that he had learned in Japan, while his countrywide archaeological surveys are highly regarded in terms of academic history as well. What particularly sets his perspectives apart in archaeological terms is the fact that he raised the possibility of underwater tombs in ancient times, and also coined the term "Haemi Culture" as part of a theory of local culture aimed at furthering understanding of Bronze Age cultures in Korea. His input was simply breathtaking. In 1969, the National Research Institute of Cultural Heritage (NRICH) was founded and Changsan was appointed as its head. Despite the many difficulties he faced in running the institute with limited financial and human resources, he gave everything he had to research and field studies of the brilliant cultural heritages that Korea has preserved for so long. Changsan succeeded in restoring Bulguksa Temple, and followed this up with the successful excavation of the Cheonmachong Tomb and the Hwangnamdaechong Tomb in Gyeongju. He then explored the Hwangnyongsa Temple site, Bunhwangsa Temple, and the Mireuksa Temple site in order to systematically evaluate the Buddhist culture and structures of the Three Kingdoms Period. We can safely say that the large excavation projects that he organized and carried out at that time not only laid the foundations for Korean archeology but also made significant contributions to studies in related fields. Above all, in terms of the developmental process of Korean archeology, the achievements he generated with his exceptional passion during the period are almost too numerous to mention, but they include his systematization of various excavation methods, cultivation of archaeologists, popularization of archeological excavations, formalization of survey records, and promotion of data disclosure. On the other hand, although this "Excavation King" devoted himself to excavations, kept precise records, and paid keen attention to every detail, he failed to overcome the limitations of his era in the process of defining the nature of cultural remains and interpreting historical sites and structures. Despite his many roles in Korean archeology, the fact that he left behind a controversy over the identity of the occupant of the Hwangnamdaechong Tomb remains a sore spot in his otherwise perfect reputation.