• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.334-339
• /
• 2008

Construction that over 70% of the structure consists of concrete gets bigger and higher gradually and the demand of that is increasing as well. However, it's not easy to supply young and skilled persons on construction site because of social avoidance phenomena about 3D occupation, so it causes serious problems like aging and shortage of technicians. To solve the problems, executives related to the construction field make a management effort in various ways such as construction period shortening, labor productivity improvement and good quality but recently, they have an increasing interest in the necessity of the modularization of the high-rise building and the automation of the engineering development for the strengthening of international competitive power as more active and long-term alternatives. Therefore, this study is to propose the roadmap in order to make lots of efforts in developing construction technologies of high-rise buildings by performing a foundation study, the strategy for 4-step research development, on modularized construction system of concrete structure of high-rise buildings through domestic and foreign preceding research analyses associated with optimal design modularization technique, module factory automation and assembly automation of modularized objects.

• 한국가스학회:학술대회논문집
• /
• 1997.09a
• /
• pp.121-126
• /
• 1997

우리나라는 그동안 가스산업에서 고속성장을 이룩해 왔으나, 근래에는 중대가스산업사고가 빈번하게 일어나고 있다. 그런 이유로 1996년도에는 중대산업사고 예방제도가 전면적으로 실시되고 공정안전보고서를 자성하여 제출하도록 함으로서 위험성 평가의 중요성이 점차 높아가고 있으며, 위험성 평가 기법들에 대하여 여러 연구 단체에서 연구${\cdot}$ 시도되고 있다. 또한 이러한 연구${\cdot}$보고된 위험성 평가 기법들을 프로그램화하고 적용하려는 시도가 많이 있어 왔다. 본 연구에서는 기존에 연구${\cdot}$개발된 위험성 평가 기법들에 최근 컴퓨터 산업의 발달에 힘입어 각광을 받고 있는 지리정보시스템을 적용하고자 한다. 이러한 가스산업시설의 위험성 평가 시스템은 위험성을 평가하기 위해서 필요한 여러 가지 정보들을 지리정보시스템이 속성 데이터로서 저장하고 있으며, 가스산업시설에 관련된 주변의 도민들을 공간 데이터로서 저장하고 있다. 그리고 위험성 평가 시스템의 세부적인 기능을 모듈화하였다. 우선 위에 언급한 속성 데이터와 공간 데이터를 관리하는 모듈과 이러한 데이터를 가지고 사고영향 범위를 산출해내기 위한 모듈, 그리고 산출된 사고 영향 범위를 도면에 나타내는 모듈로 나뉘어져 있다. 이렇게 지리정보시스템에 구축되어 있는 도면에 위험성을 평가한 결과치를 나타냄으로서 위험성 평가 숙련자가 아니더라도 위험성 평가를 할 수 있고 결과를 분석하도록 도와 줄 수 있도록 할 수 있다. 또한 향후 재난관리시스템에서는 도면상의 도로에 교통량 가중치와 인근 소방서와 경찰서등의 위치를 관리하도록 지리정보시스템을 적용할 수 있으며, 가스시설물 관리시스템에서는 최근 대형가스사고의 대부분이 타공사에 의한 것임을 고려하여 가스배관망을 포함하여 기타 다른 지하배관망을 관리하도록 지리정보시스템을 적용할 수 있다.기질로서 이용하지 못하므로 invertase 및 ${\alpha}-glucosidase$ 활성이 없는 것으로 나타났다.)의 모양은 배양에 의해 형성된 균핵(菌核)의 모양과 다소 차이가 있었다. R. cerealis의 균사생장(菌絲生長) 적온(適溫)은 $23^{\circ}C$였으며, 다른 균핵진균(菌核眞菌)들의 균사생장(菌絲生長) 적온(適溫)은 $27-33^{\circ}C$였다. 일부 균핵진균(菌核眞菌)들의 균사생장(菌絲生長) 최고온도(最高溫度)는 $41^{\circ}C$ 로서 높은 반면, R. cerealis 의 균사생장(菌絲生長) 최고온도(最高溫度)는 $31^{\circ}C$로서 낮았다. R. cerealis 의 균사생장(菌絲生長) 최저온도(最低溫度)는 $2^{\circ}C$ 였으며, 다른 균핵진균(菌核眞菌)들의 균사생장(菌絲生長) 최저온도(最低溫度)는 $6-10^{\circ}C$였다. 시술(施術)하였다. 10. 한양방향시치료시(韓洋方同時治療時) 양호이상(良好以上)의 효과(效果)를 보인 경우(境遇)가 30건중(件中) 21건(件)으로 70%의 치료효과(治療效果)를 보여 한방단일진료시(韓方單一診療時)보다 다소 높은 치료효과(治療效果)를 나타냈다. 11. 1일평균(日平均) 한방진료건수(韓方診療件數)는 26.95명(名)이었고, 1일평균(日平均) 한방초진환자수(韓方初診患者數)는 3.9명(名)으로 나타났으며, 한방진료(韓方診療)가 양한방(洋韓方) 총진료(總診療)의 23.20%를 차지했고, 1일(日) 평균(平均) 한양방(韓洋方) 총진료건수(總診療件數)에 대(對)해 1일(日) 평균(平均) 한방초진건수(韓方初診件數)가 21.51%를 차지하는 것으로 나타났다.험이 완료된 31명에서는 부작용이 없거나 경도의 부작용이 있었으나 임상적

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.69-75
• /
• 1997

우리나라는 그동안 가스산업에서 고속성장을 이룩해 왔으나, 근래에는 중대가스산업사고가 빈번하게 일어나고 있다. 그건 이유로 1996년도에는 중대산업사고 예방제도가 전면적으로 실시되고 공정안전보고서를 작성하여 제출하도록 함으로서 위험성 평가의 중요성이 점차 높아가고 있으며, 위험성 평가 기법들에 대하여 여러 연구 단체에서 연구ㆍ시도되고 있다. 또한 이러한 연구ㆍ보고된 위험성 평가 기법들을 프로그램화하고 적용하려는 시도가 많이 있어 왔다. 본 연구에서는 기존에 연구ㆍ개발된 위험성 평가 기법들에 최근 컴퓨터 산업의 발달에 힘입어 각광을 받고 있는 지리정보시스템을 적용하고자 한다. 이러한 가스산업시설의 위험성 평가 시스템은 위험성을 평가하기 위해서 필요한 여러 가지 정보들을 지리정보시스템이 속성 데이터로서 저장하고 있으나, 가스산업시설에 관련된 주변의 도면들을 공간 데이터로서 저장하고 있다. 그리고 위험성 평가 시스템의 세부적인 기능을 모듈화하였다. 우선 위에 언급한 속성 데이터와 공간 데이터를 관리하는 모듈과 이러한 데이터를 가지고 사고영향 범위를 산출해내기 위한 모듈, 그리고 산출된 사고 영향 범위를 도면에 나타내는 모듈로 나뉘어져 있다. 이렇게 지리정보시스템에 구축되어 있는 도면에 위험성을 평가한 결과치를 나타냄으로서 위험성 평가 숙련자가 아니더라도 위험성 평가를 할 수 있고 결과를 분석하도록 도와 줄 수 있도록 할 수 있다. 또한 향후 재난관리시스템에서는 도면상의 도로에 교통량 가중치와 인근 소방서와 경찰서등의 위치를 관리하도록 지리정보시스템을 적용할 수 있으면, 가스시설물 관리시스템에서는 최근 대형가스사고의 대부분이 타공사에 의한 것임을 고려하여 가스배관망을 포함하여 기타 다른 지하배관망을 관리하도록 지리정보시스템을 적용할 수 있다. (중략)램프에서 좋은 광학적 특성을 얻기 위해 가장 중요한 것은 수축이 없이 방전을 확산시키는 것이다. 이를 위해서 램프구조와 구동법을 최적화하는 것이 필요하다. 또한 기체압력을 높임으로서 Xe의 여기복사를 얻을 수 있었다. 동시에 새로운 적용영역의 가능성을 탐구하는데 있다 하겠다.[C/N]의 값을 나타내었다.다.다.화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.었다.다._{2}$가 0.25[wt%] 첨가된 시편의 20[.deg.C]에서의 유전상수는 16,700으로 최대값을 유전손실을 1.28[%]로 최소값을 나타내었다. 또한 모든 시편은 온도 및 주파수에 따라 유전상수가 완만하게 변화하는 유전이완 특성을 나타내었다.다.수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/m

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.78-85
• /
• 2020

The scaffolding system, which is a construction workbench of the cargo containment for a membrane LNG carrier, is a large truss structure composed of various members. To shorten the installation period and process of the scaffolding system, it is effective to enlarge the mounting unit from the existing two stages to eight stages. Owing to the increase in lifting load according to the large size of the module, the stresses around the pin and hole will be increased significantly. In this study, a tensile strength test and contact stress analysis were performed to confirm the structural safety. The relatively large hole deformation was observed visually near the average load generated in the vertical pipe at the top through tensile strength tests. A contact stress calculation confirmed the stress distribution around the hole. The contact problem was dealt with in terms of the Herzian contact stress. The possibility of 8-stage loading was examined by comparing the yield strength and contact stresses of failure critical locations. As a result, the 8-stage loading method of the existing scaffolding material was inadequate, and a new loading method with proper safety is proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.677-683
• /
• 2016

In urban areas, underground tunnel construction sites have spread widely to accommodate rapidly increasing traffic volume along with a high-degree economic growth. Earth tunneling might be adapted frequently for the underground space securing, and various tunneling methods have been developed to stabilize the tunnel face and crown. Among them, the DSM (divided shield method) is gaining popularity for its enhanced stability and construction efficiency. This method has its foundation from the Messer Shield method, which is one of the trenchless special tunneling methods. This study examined the effects of face reinforcement on construction the sequence through a large scale soil chamber test and numerical analyses. The chamber has a size of a 1/2 scale of the real tunnel. Surface settlements were measured according the tunneling process. Commercially available software, MIDAS GTS, was used for numerical analysis and its result was compared with the values obtained from the chamber test. The results of the study show that both settlements of the embanked soils and the stress of the tunnel girder are located within the safe criteria. Overall, this study provides basic data and the potential of using a reinforced tunnel face to enhance DSM applications.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.243-248
• /
• 2015

Domestic road and railroad construction have been increasingly growing and for reasons of mitigating traffic congestion, urban plan and refurbishment project, deeper and longer tunnels have been built. The event of fire is the most fatal accident in a tunnel, and it can be very disastrous with a high possibility. In this study, QRA (Quantitative Risk Analysis) which is one of quantitative risk analysis approaches was applied to tunnel fire safety design and the evaluation of QRA cases and the cost comparison of QRA methods were carried out. In addition analysis of risk reduction effect of tunnel fire safety system was conducted using AHP (Analytic Hierarchy Process) and the priority of major factors that could mitigate the risk in tunnel fire was presented. As a result, significant cost reduction effect could be obtained by incorporating QRA and it is expected to design fire safety system rationally. The priority of fire safety system based on risk mitigation effect by fire safety system considering the cost is in order of water pipe, emergency lighting, evacuation passage and smoke control system.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.588-597
• /
• 2016

According to an annual industrial accident report from Ministry of Employment of Labor, among the various types of accidents, the number of accidents from construction industry increases every year with the percentage of 27.56% as of 2014. In fact, this number has risen almost 3% over the last four years. Currently, among the industrial accidents, heavy machinery causes most of the tragedy such as collision or narrowness. As reported by the government, most of the time, both heavy machinery drivers and workers were unaware of each other's positions. Nowadays, however when society requires highly complex structures in minimal time, it is inevitable to allow heavy construction equipments running simultaneously in a construction field. In this paper, we have developed Approach Detection System for excavator in order to reduce the increasing number. The imaged based Approach Detection System contains camera, approach detection sensor and Around View Monitor (AVM). This system is also applicable in a small scale construction fields along with other machineries besides excavators since this system does not require additional communication infra such as server.

• Journal of the Korean Regional Science Association
• /
• v.32 no.1
• /
• pp.3-26
• /
• 2016

This study aims to examine the influence of the Daegu Subway Line 3 construction on apartment price fluctuation and to find the factors causing the apartment price fluctuation in the station area of the Daegu Subway Line 3. Empirical results of this study are as follows: first, the apartment price is more fluctuated or increased at the time of completion of subway construction than at the time of breaking ground; second, the opening of the Daegu Subway Line 3 has positive impact on apartment price nearby the station area of the Daegu Subway Line 3, especially apartment prices in the second station area (200-600m) are positively related to the opening of the Daegu Subway Line 3; third, medium-large size ($85-135m^2$) and large size (excess of $135m^2$) apartment are sensitively related to the apartment price fluctuation by the Daegu Subway Line 3 construction; and fourth, Buk-gu and Suseong-gu areas are the main beneficiaries. The results of this study suggest implications for tax and redistribution policies in the station areas.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.553-560
• /
• 2014

The road tunnel install a vent for the purpose of ventilation and smoke control. Ventilation equipment capacity(number of jet fans) depends on from the condition that of the pressure and ventilation resistance. Pressure and the resistance under operating vehicle have affected on the drag coefficient. The drag coefficient of the tunnel have affected by the blockage effect and slipstream effects. However, when calculating the ventilation fan, are not properly consider taking into account such effects. Therefore, ventilation force may have been slightly overestimated. This paper describes the drag coefficient through a numerical analysis to calculate the equivalent resistance area that reflects the vehicle distance, and examined the equivalent resistance area. The ventilation coefficient corresponding to the result heavy vehicle mixing ratio of the present study was not clear. Equivalent resistance area had reduced by about 86% compared to the road design handbook current standards. Also it had analyzed and reduced to 62.2% compared to Korea Highway Corporation ventilation design criteria ratio, which is the old standard.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.1
• /
• pp.23-30
• /
• 2015

Developed in this study were Octagonal-hollow-section(OHS) struts, whose compressive strengths against flexural and local buckling is higher than H-shape or rectangular-hollow-section(RHS) struts with the same unit weight. OHS members are also advantageous in handling and storing compared to circular hollow sections(CHS). OHS members were fabricated from HR Plates by cold forming and fillet welding. 5 numbers of 20m long OHS struts were assembled, each of which consist of two 9.6m long OHS member and two end connection elements made of cast iron. The compressive strength of the OHS strut was evaluated by comparing the test results, design codes and FEM analysis each other. Test results show that all of the struts have almost same or larger compressive strength than Korean Road Bridge Design Code(KRBDC) (2012). The initial imperfections can be estimated by using measured strains and are turned out to be less than L/450 for all the struts tested. The results of FEM analysis show that the variation of initial imperfection has less effects on the compressive strength for struts with vertical surcharge than for those with self-weight only, while the strength decreases as the initial imperfection increases. As the result of this study, the allowable initial imperfection for 20m long OHS struts is recommended to be less than L/350 on job sites.