• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.114-120
• /
• 2003

In order to provide fundamental data for development of controlled environment facilities in Korean ginseng (Panax ginseng C.A. Meyer) cultivation, field survey and analysis of structural and environmental engineering characteristics on the shading structures in ginseng fields (the ginseng houses) were carried out. In this study shading structures for ginseng cultivation were classified according to their structural materials, connection types, and detailed structures. That is they were classified into wood or steel frames, single or multi spans, and frame or cable types. As a result of the investigation, standardization of structural materials, fabrication and construction methods arc required. And it was considered that a reinforced design and a countermeasure for heavy snow are the most important matters for structural improvement. In parts of the environmental management, researches for setting up the irrigation standard are required in the first place. And it was investigated that an installation of the shading structures is a work being the most hard, taking a lot of time, and having need for automation. So controlled environment ginseng houses, with a low cost, a structural safety and a satisfactory workability, should be developed.

• KDI Journal of Economic Policy
• /
• v.28 no.1
• /
• pp.95-116
• /
• 2006

Traditionally, foreign labor inflow into Korea has been rare and, hence, issues on foreign workers did not draw much attention. However, changing economic conditions of the Korean economy, such as "labor-shortage" problem in SMEs in manufacturing sector, has made the Korean government open its door to the foreign workers since the early 1990s through the Industrial Trainee System. The inflow of foreign workers, on the other hand, has generated various social and economic problems, such as substantial increase of illegal over-stayers, illegal utilization of foreign unskilled workers by domestic SMEs, to name a few. Against this background, the Employment Permit System was implemented from 2004. This new system aims at supplying foreign workers to SMEs as well as protecting them as legal 'employees'. In any case, it is very important to understand how and to what extent the inflow of foreign workers have affected the Korean economy in order to establish long-term policy stance. This paper aims to empirically assess the economic impact of foreign workers on domestic workers in the manufacturing sector during 1997~20001, focusing on the Industrial Trainee System. The empirical results of the paper can be summarized as follows. First, there is some evidence that male semi-skilled workers are the group that is likely to have been displaced by industrial trainees. Second, we were unable to find any strong evidence suggesting that the inflow of foreign industrial trainees decreased wages of less-skilled Korean workers.

• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.134-145
• /
• 1986

The experiment was crried out to evaluated the herbicidal properties of bensulfuron methyl [methyl 2-[[[[[(4, 6-dimethoxy pyrimidine-2yl) amino] carbonyl] amino] sulfonyl] methyl] benzoate]. No phytotoxicity was observed when bensulfuron methyl was applied at 3 and 6 g a.i./ 10a while the application rate 12 g a.i./10a slightly retared the growth of rice. The phytotoxicity decreased as the application time was delayed. The effect of application rate, leaching grade, transplanting depth, soil type and temperature on crop injury was little. Japonica variety (Dong-Jin) was more sensitive to bensulfuron methyl than indica X japonica variety (Sam-Kang). Bensulfuron methyl controlled effectively perennial weeds such as Sagittaria pygmaea Miq., Potamogeton diatinctus A. Benn., Cyperus serotinus Rottb., Sagittaria trifolia L., Eleocharis kuroguwai Ohwi. including most annual weeds except Echinochloa crus galli P. Beauv. The effect slightly decreased with lowering the temperature increasing the leaching grade. Application time and soil type employed did not affect the weeding effect.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.51-62
• /
• 1999

The objective of this research is to develop paper sludge reinforced thermoplastic composites which incorporate the advantages of each component materials. The effects of paper sludge content(0, 10, 20, 30, 40----), mesh size(20~40, 60~80, less than 100mesh), and coupling agent(Epolene E-43 and Epolene G-3003) on the mechanical properties of paper sludge-polypropylene composites were investigated. Composite density increased with an increase in the paper sludge content. When paper sludge is incorporated into a polypropylene matrix, the flexural properties of the composite increase significantly with an increase in the paper sludge mixing ratio. Especially, flexural modulus was improved with increasing paper sludge content. The flexural strength of composites was improved, but flexural modulus reduced somewhat with decreasing paper sludge particle size. The flexural properties of paper sludge-polypropylene composites were improved by using coupling agents to enhance the bonding between reinforcing filler and matrix. Use of the epolene E-43 and G-3003 resulted in considerable improvement in the flexural strength over control specimens. The flexural strength of the G-3003 composite system is higher than that of the E-43 system. Generally, izod notched impact strength of paper sludge-polypropylene composite decreased slightly, whereas izod unnotched impact strength decreased significantly with increasing paper sludge contents. There was no effects of paper sludge particle size on impact strength of paper sludge-polypropylene composites. And izod unnotched impact strength of epolene E-43 composite system sharply decreased but that of G-3003 composite system was no tendency with increasing additive content.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.13-20
• /
• 2014

In natural gas distribution system, gas pressure is regulated correspond to requirement using throttle valve which is releasing huge pressure energy as useless form. The waste pressure can be recovered by using turbo machinery devices such as a turbo expander. In this process, excessive temperature drop occurs due to Joule-Thompson effect during the expansion process. Installing natural gas boiler before or after the turbo expander prevents temperature drop. Fuel cell or gas engine hybrid system further improve the efficiency, but 1~2% of total transporting natural gas is used for operating the hybrid system. In this study, a heat pump system is proposed as a preheating device which can be operated without using transporting natural gas. Thermodynamic analysis on evaporating and condensing temperatures and refrigerants is conducted. Results show that R717 is proper refrigerant for the hybrid system with high COP and low turbine work within the defined operating conditions. In domestic usage in Korea, the heat pump system has more economic feasibility owing to natural gas being imported with a high price of LNG form.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.182-187
• /
• 2003

Quality attributes of reconstructed pork patties with ISP were evaluated. Reconstructed pork patties with 30% meat plus ISP and 50% meat plus had significantly less cooking loss and dimensional changes than control. Sensory evaluation revealed patties with 30 or 50% meat had higher hardness and juiciness than control, patties with ISP, and patties with direct addition of ISP. Objective elasticities of patties with 30 or 50 % meat were high, whereas patties without ISP had higher values of hardness, gumminess, and chewiness. Color of patties with 30 or 50% meat were different from that of control. These result show addition of ISP to meat emulsion for pork patties markedly improved cooking loss, dimensional changes, hardness, and juiciness. When pork patties and cutlets prepared according to meat (30%) formula were frozen, cooking loss was significantly higher in slow-frozen patties, but freezing rate did not affect dimensional changes of patties and cutlets. Slow-frozen patties had higher hardness, but other textural properties were affected by the freezing rate. Quality of pork cutlets was not significantly changed by the freezing rate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.899-905
• /
• 2003

The effects of cooked soybean and a traditional fermented soy product, chongkukjang, on blood pressure and lipid metabolism were studied in spontaneously hypertensive rat (SHR). SHRs were divided into 3 groups (n=10, male), and fed casein, powders of cooked soybean, and chongkukjang as dietary protein sources for 6 weeks. Body weight gain was not different among experimental groups, but food efficiency was increased in groups fed cooked soybean and chongkukjang diets compared to control group. Consumption of cooked soybean and chongkukjang for 6 weeks in SHR significantly suppressed blood pressure rise with aging (p<0.05). Feeding of cooked soybean and chongkukjang to SHR decreased plasma triacylglycerols (p<0.05) by 21.6% and 30.2% and LDL-cholesterol by 30.0% and 27.5%, respectively. Addition of cooked soybean and chongkukjang to the diet resulted in reduction of total lipids and triacylglycerols of liver, while consumption of cooked soybean and chongkukjang resulted in the increase of fecal cholesterol and bile acid excretions, respectively (p<0.05). Cooked soybean and chongkukjang diets down-regulated the activity of hepatic HMG-CoA reductase by 56.4% and 94.5%, compared to control, respectively. From the above-mentioned results, it can be concluded that consumption of cooked soybean and chongkukjang might be helpful in preventing cardiovascular disease by suppressing blood pressure rise and hyperlipidemia.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.575-580
• /
• 2013

The IMU(Inertial Measurement Unit) which is the expensive equipment has been used as a special limited area, usually in measurement of posture of applying to the areas of ship, submarine, aircraft and military equipment application. However, in the current situation, MEMS AHRS technology can replace the high-priced IMU in MEMS AHRS selected application field. In this paper, wireless hull motion measurement system was suggested for measuring key elements of ship's movement such as rolling, pitching and yawing using gyro, acceleration and magnetic sensors of AHRS. In order to reduce the error such as instantaneous acceleration, effects and vibration of geomagnetic, we have adopted the sensors equipped with Kalman filtering. The Wireless hull motion measurement system using AHRS sensors was tested in actual ship and it could easily be applied in limited installation circumstances of the ship. In the future, this system can be useful in the navigation safety and marine accident analysis by using with ship equipment such as INS or VDR in the maritime.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.387-394
• /
• 2010

In the field of healthcare, the conventional sterilization treatments have been replaced by irradiation methods which are in accordance with internationally well established quality standards. The quality control in radiation sterilization assures that the absorbed dose of the irradiated material is in agreement with its requirements and standards. The electron beam irradiation requires technical assessments of more process parameters than gamma irradiation does. Korea has witnessed wide uses of electron accelerators since early 2000 but there hasn't been research experiences relating to quality system in accordance with international standards. The new large scale e-beam irradiation system with the specification of 10 MeV, 8 kW was installed and operated in 2008 by Seoul Radiology Services Co. It consists of the electron accelerator, product handling system, safety, documentation and control subsystems into an integrated system to meet the requirement of the Good Manufacturing Practice such as process quality assurance and management of product tracking records. To implement the international standard such as EN ISO11137, it is necessary to understand the purposes aimed in the standard and carry out the tests following the procedures required. This study presented the specification of the e-beam facility and showed what its design requirements and features are. The test results on a variety of process parameters were presented and validated it they are within the required limits.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.530-537
• /
• 2015

Photovoltaic (PV) modules are environmentally energy conversion devices to generate electricity via photovoltaic effect of semiconductors from solar energy. One of key elements in PV modules is "Backsheet," a multilayered barrier film, which determines their lifetime and energy conversion efficiency. The representative Backsheet is composed of chemically resistant poly(vinyl fluoride) (PVF) and cheap poly(ethylene terephthalate) (PET) films used as core and skin materials, respectively. PVF film is too expensive to satisfy the market requirements to Backsheet materials with production cost as low as possible. The promising alternatives to PVF-based Backsheet are hydrocarbon Backsheets employing semi-crystalline PET films instead of PVF film. It is, however, necessary to provide improved barrier property to water vapor to the PET films, since PET films are suffering from hydrolytic decomposition. In this study, a polyurethane adhesive with reduced water vapor permeation behavior is developed via a homogeneous distribution of hydrophobic silica nanoparticles. The modified adhesive is expected to retard the hydrolysis of PET films located in the core and inner skin. To clarify the efficacy of the proposed concept, the mechanical properties and electrochemical PV performances of the Backsheet are compared with those of a Backsheet employing the polyurethane adhesive without the silica nanoparticles, after the exposure under standard temperature and humidity conditions.