• Journal of Plant Biotechnology
• /
• v.34 no.2
• /
• pp.111-118
• /
• 2007

Global warming crisis due primarily to continued green house gas emission requires impending change to renewable alternative energy than continuously depending on exhausting fossil fuels. Bioenergy including biodiesel and bioethanol are considered good alternatives because of their renewable and sustainable nature. Bioethanol is currently being produced by using sucrose from sugar beet, grain starches or lignocellulosic biomass as sources of ethanol fermentation. However, grain production requires significant amount of fossil fuel inputs during agricultural practices, which means less competitive in reducing the level of green house gas emission. By contrast, cellulosic bioethanol can use naturally-growing, not-for-food biomass as a source of ethanol fermentation. In this respect, cellulosic ethanol than grain starch ethanol is considered a more appropriate as a alternative renewable energy. However, commercialization of cellulosic ethanol depends heavily on technology development. Processes such as securing enough biomass optimized for economic processing, pretreatment technology for better access of polymer-hydrolyzing enzymes, saccharification of recalcitrant lignocellulosic materials, and simultaneous fermentation of different sugars including 6-carbon glucose as well as 5-carbon xylose or arabinose waits for greater improvement in technologies. Although it seems to be a long way to go until commercialization, it should broadly benefit farmers with novel source of income, environment with greener and reduced level of global warming, and national economy with increased energy security. Mission-oriented strategies for cellulosic ethanol development participated by government funding agency and different disciplines of sciences and technologies should certainly open up a new era of renewable energy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.119-127
• /
• 2014

The application of sulfur polymer emulsion (SPE) as an acrylate substitute for semi-rigid pavement grout was evaluated, and the performance improvement by employing PVA fibers were also evaluated. The result indicated that the filling ratio of semi-rigid pavement material decreased as the fiber content increased, but it was measured to be 92~94% in every mixing condition, which satisfies the target performance, 90%. The maximum Marshall stability value of semi-rigid pavement material was measured to be 25.4 kN, which is about 4.7 times higher than the Korean Standard required for semi-rigid pavement material, 5.0 kN. The dynamic stability evaluation of semi-rigid pavement material indicated that the resistance to deformation from the wheel tracking test was improved by an SPE substitution, and in every mixing condition, the deformation converged to a constant value after 45 minutes with the same dynamic stability of 31,500 times/mm. The strain at the flexural failure was about 0.53%, which shows superior rigidity to asphalt pavements. The examination of abrasion resistance and impact resistance showed that the loss ratio was 9.8~6.0% in every mixing condition, which indicates a good abrasion resistance. Also, when fiber content ratio was 0.3%, the impact resistance was 2.82 times higher compared to plain (i.e., when fibers were not added). In the limited range of this study, an SPE substitution ratio of 30% was found to be an optimal level considering the mechanical and durability performance. In addition, it is thought that semi-rigid pavement material with superior performance could be manufactured if fiber content ratio up to 0.3% is applied depending on the purpose of use.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.469-474
• /
• 2000

This study was conducted to investigate the utilization of defatted soybean meal as a substitute for fish meal in the diet for juvenile flounder (Paralichthys olivaceus). Duplicate groups of average weighing 35 g were fed one of four isonitrogenous ($54{\%}$) and isocaloric (575 kcal/100 g diet) diets containing $0{\%}, 10{\%}, 20{\%} and 30{\%}$ soybean meal for 45 days. Survival rates of all groups were $100{\%}$, Weight gain of fish decreased with increasing dietary soybean meal levels, However, this value was not significantly different between fish fed the control and $10{\%}$ soybean meal diet (P > 0.05). Feed efficiency and protein efficiency ratio decreased with increasing dietary soybean meal levels, but no significant differences were found among fish fed the control, $10{\%}\;and\;20{\%}$ soybean meal diets (P > 0.05). Daily feed and protein intake increased with increasing dietary soybean meal level. Crude protein and moisture content of liver tended to decrease and crude lipid content tended to increase with decreasing of dietary soybean meal levels. Plasma total cholesterol levels of fish fed the diets containing $20{\%}\;and\;30{\%}$ soybean meal were significantly lower than that of fish fed control diet (P < 0.05), Plasma GOT level significantly increased with increasing dietary soybean meal level (P < 0.05). It is concluded that soybean meal can be used as a partial substitute for fish meal up to $10{\%}$ in this dietary formulation for growth of juvenile flounder.

• Composites Research
• /
• v.34 no.1
• /
• pp.35-46
• /
• 2021

This paper aims to reduce weight by replacing the reinforcements of the B-pillar used in vehicles with CFRP(Carbon Fiber Reinforced Plastics) and GFRP(Glass Fiber Reinforced Plastics) from the existing steel materials. For this, it is necessary to secure structural stability that can replace the existing B-pillar while reducing the weight. Existing B-pillar are composed of steel reinforcements of various shapes, including a steel outer. Among these steel reinforcements, two steel reinforcements are to be replaced with composite materials. Each steel reinforcement is manufactured separately and bonded to the B-pillar outer by welding. However, the composite reinforcements presented in this paper are manufactured at once through compression and injection processes using patch-type CFRP and rib-structured GFRP. CFRP is attached to the high-strength part of the B-pillar to resist side loads, and the GFRP ribs are designed to resist torsion and side loads through a topology optimization technique. Through structural analysis, the designed composite B-pillar was compared with the existing B-pillar, and the weight reduction ratio was calculated.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.1
• /
• pp.21-34
• /
• 2023

This study identified the materials and construction methods of 'Old Wall' in 13 villages which were designated as National Registered Cultural Heritage at the time of designation and examined the their structural changes based on field survey. The results are as follows: First, the 'Old Wall' consisted of 10 Soil-Stone Wall and 5 Stone Wall. At the time of designation, Stone Wall, which was built irregularly by dry-construction of natural stones, is similar in shape, but Soil-Stone Wall showed difference by the construction method of making used stones, joints, and faces. Second, the study extracted the changes of 'Old Wall' by repair and examined the changes of construction methods as well as the substitution and addition of materials of structure. The wall-roof was built with cement roof-tile and asbestos slate which have the advantage improve durability and cost-effectiveness. In addition, tile-mouth soil was added to korean traditional roof-tile to prevent rainwater from flowing in. Besides, to improve constructional convenience, the natural stone of the wall-body was replaced with blast stone, float stone and cut stone. Cement block, cement brick and cement mortar were frequently used to repair as well. As Soil-Stone Wall was transformed from irregular pattern-construction to comb pattern-construction and wet-construction was changed to dry-construction, it caused landscape and structural problems. Also, the layer of cement mortar applied to wall-foundation blocked the flow of rainwater that was induced by dry-construction of natural stones. Third, the study regarded that the problem with the repair of 'Old Wall' may occur as it is located in living space, because the owner of the wall could repair for the minor damages without technical knowledge. In addition, it is difficult for repair companies in charge of maintenance of Cultural Heritage to supply local materials, and it is differential construction specifications are not applied.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.2
• /
• pp.74-94
• /
• 1993

Metabasites and metapelites in the Mungyong area were intruded by Cretaceous granites with radius of 4-8 km. As the distance from granite body increases, the mineral assemblage of metabasite changes from amphibole + plagioclase through amphibole + plagioclase + epidote to amphibole + plagioclase + epidote + chlorite. The compositional variations of amphibole and plagioclase according to the change of metamorphic grade and bulk rock compositions are very complex. Towards the Mungyong Cretaceous granite body, the mineral assemblage of metapelite changes from chlorite+ muscovite(ch1orite zone) through biotite + chlorite + muscovite(biotite zone) to andalusite+biotite + muscovite${\pm}$chlorite or cordierite+ biotite+ muscovite${\pm}$chlorite(cordierite zone). The estimated metamorphic conditions of cordierite zone are 480~$580^{\circ}C$ 1.5-3.3 kb. The theoretical study on the thermal metamorphism caused by the Cretaceous granite with radius longer than 4 km in the Mungyong area suggests the followings: The degree of metamorphism is mainly determined not by the size of granite body but by the temperature of granite intrusion; The country rocks within 2 km from Cretaceous granite have undergone metamorphism with temperature higher than $500^{\circ}C$, which is consistent with the petrological study in the Mungyong area. Mungyong Cretaceous granite caused a low P/T thermal metamorphism to the country rocks; the amphibolite facies metamorphism to the country rocks within 1-2 km from the granite body and the epidote-amphibolite and greenschist facies metamorphism to the country rocks within 2-5 km.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.252-254
• /
• 2005

박물관 수장고와 전시실 내의 유기물 문화재는 실내공기에 부유하고 있는 먼지와 곰팡이로 인해 생물적 피해를 받는다. 미생물로 인한 피해를 줄이기 위하여 박물관에서는 환경 조절법을 시행하거나 수장고와 전시실 내에 보존약제를 놓거나 또는 훈증 처리를 통한 방균 방제처리를 시행하고 있다. 미생물의 발생은 문화재 표면의 착색, 재질 분해, 변질 등을 야기한다. 본 연구는 위에 제시된 방법 외에 공기청정기를 이용하여 실내 부유 미생물 수를 줄여 유기물 문화재의 피해를 줄일 수 있는지를 알아보았다. 국립문화재연구소 내 생물과학실의 실험실 한 곳을 임의로 지정하여 공기청정기를 설치하기 전 곰팡이의 수를 측정하고, 공기청정기를 설치한 후의 곰팡이 변화를 4일 간격으로 측정하였다. 또한, 공기 중의 ???r성분 분석을 위하여 가스크로마토그래피(Gas Chromatography)를 이용하였다. 측정결과 곰팡이의 수는 대체적으로 감소하였으며, 채취한 곰팡이를 배양하여 동정을 실시하였다. 곰팡이 동정은 현미경을 통한 형태학적 분류와 ITS(Internal Transcribed Sequence)를 이용한 rDNA(Ribosomal DNA) PCR(Polymerase Chain Reaction)분석 두 가지 방법을 이용하여 동정하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.235-237
• /
• 2005

인터넷 사용의 증가로 않은 사람들이 기존의 편지나 엽서를 사용하던 것을 전자 메일(e-mail)로 대체하고 있다. 전자 메일은 텍스트뿐만 아니라 그림, 음성, 동영상까지 전송이 가능하여 필요한 문서들도 첨부가 가능하여 많은 사람들에게 호응을 얻고 있지만 광고 메일이나 음란 사이트 홍보 메일로 사용되면서 많은 전자 메일 사용자들에게 정신적 피해를 주고 있으며 메일링 서비스를 하고 있는 업체들에게 큰 유해를 끼치고 있다. 본 논문에서는 사용자가 요구하지 않은 광고성 스팸 메일을 OTP(One Time Password)를 이용하여 효과적으로 차단하는 모듈을 제안, 설계한다. 기존의 차단 방식은 메일 서버에 저장된 메일들을 삭제하는 방식으로 메일 서버에 많은 과부하를 주며 메일 서버의 저장 용량을 낭비하여 사용자로 하여금 곡 필요한 메일들을 송, 수신 하지 못할 수도 있었다. 본 논문에서 제안하는 시스템은 스팸 메일로 분류된 메일들을 메일 서버 자체에 저장하지 않는 방식을 사용하여서 기존의 문제점을 해결하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1584-1589
• /
• 2013

A new and significantly small guided and resonant structure is suggested to take over bulky metallic hollow waveguides used in military satellite transceivers. Below Ku-band, the conventional waveguides resulting in quite heavy transceivers will be replaced by the low profile SIW(substrate integrated waveguide) structures that are distinguished from the others in that the suggested ones have much lower cut-off frequencies by the circuital configuration of DNG(dobule negative) constitutive parameters and become even smaller than the other SIWs. The design scheme is validated by the circuit and full-wave simulations from the guided, resonant, and coupled structures. Besides, a bandpass filter as the suggested coupled structure is fabricated with a cheap substrate in a low-budget fabrication process and its frequency response is measured as verification of the purpose of the design.

• Journal of the Korean Ceramic Society
• /
• v.49 no.3
• /
• pp.216-220
• /
• 2012

Mullite formation in a porcelain body was promoted extensively by replacing kaolinite with pyrophyllite. Effects of mullite formation and vitrification by substitution of kaolinite with pyrophyllite on the mechanical and thermal properties were investigated. Addition of 45-55% pyrophyllite (pyrophyllite (45-55%)-feldspar (30%)-Gairome clay (20%)) could vitrify the sintered samples (water absorption : 0.05%, bulk density : 2.66g/cc) and improve the flexural strength (122MPa) when fired at $1280^{\circ}C$. Mullite formation was found to be decreased with increasing content of pyrophyllite. On the contrary, beyond 50% of pyrophyllite quartz and cristobalite phases was found to be increased. Thermal expansion coefficient of the samples decreased with increase of mullite phase. In triaxial system of pyrophyllite-feldspar-clay, the mullite formation of the samples with 50% pyrophyllite reaches about 78.7% and thermal expansion coefficient was found to be $5.4{\times}10^{-6}/K$.