• Elastomers and Composites
• /
• v.49 no.4
• /
• pp.293-304
• /
• 2014

Rubber air spring (RAS) is a special suspension device for the industries of automobile, railroad car and other transportation. A RAS serves as a spring component with the elastic effect of compression and expansion of air in a composite rubber bag. The main component of RAS is the rubber sleeve. Rubber sleeve is the composite which is made up of combination of chloroprene rubber (CR) and nylon 6 cord, and the adhesive strength between CR and nylon 6 cord is very important. In this study, considering the effects of additives in rubber sleeve, various physical properties were tested to find the optimal combination of composition and conditions. Further, in order to select the optimum orientation of the reinforcing fibers, numerical analysis was performed using the finite elements method. After assembling all components of RAS, it was mounted on an actual vehicle, and then it was tested air leakage, fatigue life and fundamental properties.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.305-312
• /
• 2014

The current American Concrete Institute(ACI), Canadian Standard Associate(CSA) and CEB-FIP Model Code 2010 provisions on the shear strength of a simply supported deep beam suggest that deep beams should be designed using the strut-and-tie model. Although this is a useful methodology to design members in disturbed regions, the quality of the design is highly dependent on the truss model that designers create. However, Hong et al. derived the shear strength equations of reinforced concrete deep beams. This thesis investigates the validity of the current ACI, CSA and CEB-FIP code provisions on the shear strength of simply supported reinforced concrete deep beams by comparing them with the shear strength equations proposed by Hong et al. The comparison shows that all of these code provisions provide reasonable estimates on the shear strength of concrete deep beam members and the selection of an internal truss model plays an important role on the estimation of shear strength.

• Journal of Aerospace System Engineering
• /
• v.11 no.6
• /
• pp.42-49
• /
• 2017

A 10kw wind turbine blade aerodynamic design was carried out using the self-developed program AeroDA. The concept, basic shape, and optimization were designed and verified. A performance analysis was carried out and the key factors in each design stage are summarized. In addition, a guide for the placement of cross-section airfoils constituting the blades is presented, and the importance of the stall margin test as a method of verifying aerodynamic design is summarized. In order to verify the design program AeroDA, we compared the results of the performance analysis with a specialized program DNVGL_Bladed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.39-46
• /
• 2013

Bicationic minerals such as calcium and magnesium are known to protect the skin barrier. The principal objective of this study was to evaluate the skin barrier protective effects of mineral water, which is composed of calcium, magnesium, manganese, and fluorine. UVB irradiation induces a destruction of tight junction (TJ) components. The TJ permeability barrier was also disrupted by UVB irradiation. We employed a skin equivalent model to assess the efficacy of mineral water in this regard. Mineral water maintained the structure of the skin equivalents following UVB irradiation. The results of the TJ permeability assay showed that mineral water helped to maintain the TJ permeability barrier after UVB irradiation in skin equivalent model. Mineral water supported the structure of TJ components and restored the occludin protein level in differentiated normal human keratinocytes after UVB irradiation. In conclusion, we found out the protective effect of mineral water against UVB irradiation.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.3
• /
• pp.47-59
• /
• 2017

As the global warming threats to humanity, renewable energy is considered the key solution to overcome the climate change. In this circumstance, distributed PV systems are being expanded significantly its market share in the renewable energy industry. The performance of inverter is the most important component at PV system and numerous researches are focusing on it. In order to improve the inverter, PV simulator is an essential device to experiment under various load and conditions. This paper proposes the PV Power-Hardware-In-Loop simulator (PHILS) with real-time processing converted electrical and mathematical models to improve computation speed. Single-diode PV model is used in MATLAB/SIMULINK for the PV PHILS to boosting computation speed and dynamic model accuracy. In addition, control algorithms for sub-components such as DC amplifier, measurement device and several interface functions are implemented in the model. The proposed PV PHILS is validated by means of experiments with commercial PV module parameters.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.6
• /
• pp.763-770
• /
• 1993

To investigate the quality changes during frozen storage, top shell, Omphalius pfeifferi capenteri, was stored at -18$^{\circ}C$, -$25^{\circ}C$ and -3$0^{\circ}C$ immediately after shelling and water holding capacity, protein composition and histological features were examined with the lapsed period of the storage. During the storage period, amount of free drip was increased with higher frozen temperature and longer frozen period, but with the longer storage period, the lower water holding capacity was observed. The extractability and composition of muscle protein, sarcoplasmic protein and stroma protein were rather stable regardless of frozen temperature and frozen storage period. However, the extractability of myofibrillar protein was decreased with higher frozen temperature and longer frozen storage period. On the changes of muscle tissue structure, following points were observed. 1) In the muscle tissue structure of fresh sample, fine muscle fiber was closely distributed all over the tissue regardless of cross and longitudinal section. 2) In tissue structure under frozen state, it was observed that ice crystals apparently grew with the higher storage temperature. Empty spaces between muscle bundles which wee formed by aggregations of muscle fiber were observed after 3 months storage at -18$^{\circ}C$ . 3) Tissue structure in thawed state was restored satisfactorily after 1 month storage regardless of storage temperature. After 3 months storage at -3$0^{\circ}C$, muscle tissue was well restored, but at -18$^{\circ}C$, empty spaces were apparent due to incomplete restoration.

• Journal of Embryo Transfer
• /
• v.32 no.3
• /
• pp.159-163
• /
• 2017

The artificial insemination (AI) is one of the best assisted reproductive technologies for increasing reproductive capacity and facilitating the genetic improvement in farm animals. AI has been used in Uganda for over 60 years, but a small population of the total herd has been used. This study was conducted to investigate the efficacy of AI with estrus synchronization technique and to propose ways of improving the productivity of dairy farms through AI services in Uganda. In total, 78 cows from 11 dairy farms were selected for timed-AI. Synchronization was performed according to the ovsynch programs followed by AI using frozen semen from Korean Holstein (0.5 ml straws). Pregnancy rate was varying among farms (0-50%) and the overall pregnancy rate was 28.2%. Cows in luteal phase at the time of treatment was 40.0% whereas that in follicular phase was 20.8%. After treatment, cows that showed normal estrus signal were 45.5% (25/55). Abnormal estrus was categorized into pre-estrus (9.1%), cystic ovaries (21.8%), anestrus (18.2%) and delayed ovulation (5.5%), respectively. These results imply that an assured protocol for timed-AI should be developed to improve the productivity of dairy farms through AI services in Uganda.

• Archives of design research
• /
• v.17 no.1
• /
• pp.135-142
• /
• 2004

This study is an analyze for Casa del Fascio, of Giuseppe Terragni, an important architect of fascism period of Italy. Based on the spot reinvestigation of first copies and unpublished data in a archive for a month of 2002. August, Terragni, Como, to compromise with the limit of studies up to the present. General's from early scheme to final constructed scheme, finally offered standard way to understand Terragni's scheme. Result of analyze are to two conclusions. 1) It has direct bearings between physical environment of site which was to build from original scheme and final decided external form. Especially there is direct relation between facade and composition of Duomo Cathedral, in the center of Como. 2) Although the image for scheme by architect represented as a physical form which was impossible to analyze the data as development sequence from archive, it influences on the first image, which had changed many times, exists as important element to final constructed scheme.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.37-48
• /
• 2012

These days many DLNA home media network services start in home network area. DLNA networking softwares included in DLNA media devices contains all of server, renderer and controller functions. But a home media device in home media network environment not uses all of DLNA functions but uses only limited functions. Using all of integrated DLNA functions wastes networking and processing resources especially in home media network, because a home media device uses very limited functions. For example, a smart-TV has a main role of playback and a network attached storage has a main role of media content storage. In this paper, we analyze integrated DLNA networking softwares and design DLNA software models representing each home media device so as to utilize device resources efficiently. And we implement DLNA softwares for smart-TV and smart-phone and test resource efficiency.

• Journal of KIISE:Software and Applications
• /
• v.31 no.2
• /
• pp.182-188
• /
• 2004

This paper proposes to synthesize facial images from a few parameters for the pose and the expression of their constituent components. This parameterization makes the representation, storage, and transmission of face images effective. But it is difficult to parameterize facial images because variations of face images show a complicated nonlinear manifold in high-dimensional data space. To tackle this problem, we use an LLE (Locally Linear Embedding) technique for a good representation of face images, where the relationship among face images is preserving well and the projected manifold into the reduced feature space becomes smoother and more continuous. Next, we apply a snake model to estimate face feature values in the reduced feature space that corresponds to a specific pose and/or expression parameter. Finally, a synthetic face image is obtained from an interpolation of several neighboring face images in the vicinity of the estimated feature value. Experimental results show that the proposed method shows a negligible overlapping effect and creates an accurate and consistent synthetic face images with respect to changes of pose and/or expression parameters.