• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.291-305
• /
• 2010

A three-dimensional time-domain calculation method is of crucial importance in prediction of the motions and wave loads of a ship advancing in a severe irregular sea. The exact solution of the free surface wave-ship interaction problem is very complicated because of the essentially nonlinear boundary conditions. In this paper, an approximate body nonlinear approach based on the three-dimensional time-domain forward-speed free-surface Green function has been presented. The Froude-Krylov force and the hydrostatic restoring force are calculated over the instantaneous wetted surface of the ship while the forces due to the radiation and scattering potentials over the mean wetted surface. The time-domain radiation and scattering potentials have been obtained from a time invariant kernel of integral equations for the potentials which are discretized according to the second-order boundary element method (Hong and Hong 2008). The diffraction impulse-response functions of the Wigley seakeeping model advancing in transient head waves at various Froude numbers have been presented. A simulation of coupled heave-pitch motion of a long rectangular barge advancing in regular head waves of large amplitude has been carried out. Comparisons between the linear and the approximate body nonlinear numerical results of motions and wave loads of the barge at a nonzero Froude number have been made.

• Reproductive and Developmental Biology
• /
• v.31 no.1
• /
• pp.29-33
• /
• 2007

This study was conducted to examine the development of in vitro fertilized (IVF) and nuclear transfer (NT) embryos following vitrification IVF and NT embryos developed to the blastocyst stage were equilibrated by 3 steps, vitrified and thawed, and their survival and hatching rates were examined. In IVF embryos, higher survival (82.1%, 96/117) and hatching rates (64.1%, 75/117) were obtained respectively after thawing and culture in expanded blastocysts compared to blastocysts (p<0.05). High survival and hatching rates were also obtained by vitrification of NT blastocysts, especially in expanded and hatching blastocysts (81.1 and 78.3%, respectively). The result of this study shows that IVF and NT blastocysts, especially late stage blastocysts, are successfully cryopreserved by vitrification.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.115-122
• /
• 2005

In this paper, a new method composed of discrete element method and genetic algorithm has been introduced to estimate the safety factor and search critical slip surface on slope stability analysis. In case of estimating the safety factor, conventional methods of slope analysis based on the limit equilibrium do not satisfy the overall equilibrium condition; they must make assumptions regarding the inclination and location of the interstice forces. An alternative slope analysis method based on the discrete element method, which can consider the compatibility condition between force and displacement, is presented. Real-coded genetic algorithm is applied to the search for the minimum factor of safety in proposed analysis method. This search method is shown to be more robust than simple optimization routines, which are apt to find local minimum. Examples are also shown to demonstrate the applicability of the proposed method.

• Journal of Hydrogen and New Energy
• /
• v.25 no.6
• /
• pp.561-569
• /
• 2014

Ceria ($CeO_2$) was used to increase the durability of the membrane in the polymer electrolyte membrane water electrolysis (PEMWE) circumstance. The sulfonated polyether ether ketone (SPEEK) as polymer matrix was prepared in the sulfonation reaction of polyether ether ketone (PEEK) to improve electrochemical characteristics. After sulfonation reaction, the organic-inorganic blended composite membranes were prepared by means of sol-gel casting method with loading the highly dispersed $CeO_2$ and Cs-substituted molybdophosphoric acid (Cs-MoPA) with cross-linking agent (tetrapropyl orthosilicate). Consequently, the composite membrane CL-SPEEK/Silane 4wt%/Cs-MoPA/Ceria(1%) showed the improved characteristics such as 82% of water content, 0.11136 S/cm of proton conductivity at $80^{\circ}C$, 55.50 MPa of tensile strength and 4.37% of breeding out of MoPA.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.92-99
• /
• 1991

A moored body in the sea is subjected to second-order wave forces as well as to linear oscillatory ones. The second-order farces contain slowly-varying components, of which the characteristic frequency can be as low as the natural frequency of horizontal motions of the moored body. As a consequence, the slowly-varying force can excite unexpectedly large horizontal excursion of the body, which may cause a serious damage on the mooring system. In design analysis of Turret-type mooring system which is one of the interesting mooring systems for a floating body. the slowly-varying drift forces and the transient motion of the system during weathervaning are very important. In this paper the slowly-varying drift forces were calculated by using the Quadratic Transfer Function with considering the second order free-wave contributions. Additionaly the transient surge motion of the moored body was simulated with including the roll of the time-memory effect. In this simulation the spring constant of the spread Turret mooring system is updated at every time step for considering the nonlinear effect.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.71-79
• /
• 2002

Nuclear design characteristics of duplex burnable poison rod were evaluated based on 24 month cycle fuel for Korean Standard Nuclear Plant. A fuel assembly with duplex burnable poison rod was designed for an equivalent assembly to 16 gadolinia BPs. Duplex BP is composed of inner region of natural U-12wt%Gd$_2$O$_3$ and outer shell of 4.95wt%UO$_2$-2wt%Er$_2$O$_3$. In order to compare this duplex option, assemblies with 140 erbia pins were designed as an alternative option. The variation of k-infinitive, rod worth, pin peaking and MTC were compared. Duplex BP had the better neutronic performance than gadolinia BP in all parameters. However, Duplex BP was worse than erbia BP in the aspect of safety.

• Journal of Animal Reproduction and Biotechnology
• /
• v.34 no.3
• /
• pp.232-239
• /
• 2019

In general, cloned pigs have been produced using the somatic cell nuclear transfer (SCNT) technique with various types of somatic cells; however, the SCNT technique has disadvantages not only in its low efficiency but also in the development of abnormal clones. This study aimed to compare early embryonic development and quality of SCNT embryos with those of induced pluripotent stem cells (iPSCs) NT embryos (iPSC-NTs). Ear fibroblast cells were used as donor cells and iPSCs were generated from these cells by lentiviral transduction with human six factors (Oct4, Sox2, c-Myc, Nanog, Klf4 and Lin28). Blastocyst formation rate in iPSC-NT (23/258, 8.9%) was significantly lower than that in SCNT (46/175, 26.3%; p < 0.05). Total cell number in blastocysts was similar between two groups, but blastocysts in iPSC-NT had a lower number of apoptotic cells than in SCNT (2.0 ± 0.6 vs. 9.8 ± 2.9, p < 0.05). Quantitative PCR data showed that apoptosis-related genes (bax, caspase-3, and caspase-9) were highly expressed in SCNT than iPSC-NT (p < 0.05). Although an early development rate was low in iPSC-NT, the quality of cloned embryos from porcine iPSC was higher than that of embryos from somatic cells. Therefore, porcine iPSCs could be used as a preferable cell source to create a clone or transgenic animals by using the NT technique.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1235-1244
• /
• 2017

The purpose of this study was to investigate the effect of dietary addition of pegmatite for Hanwoo steers on the carcass characteristics. Based upon the findings yielded by the research referenced above, the results may be summed up as follows : Oleic acid was for the most part, higher as T2 plots (45.40%) and T3 plots (44.20%) compared with Con. plots (42.50%). As well, this study has shown that the treatment plots in unsaturated fatty acid (UFA), monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) were largely higher than that of Con. plots, and of them all, T2 plots were highest. As for the melting point of fat, T2 plots ($29^{\circ}C$) were largely lower than that of Con. plots ($31.9^{\circ}C$). This study has shown that the treatment plots were significant higher as the content of total essential amino acid and total amino acid and inosine monophosphate in the nucleotide compound for the Hanwoo beef was treatment plots when compared with Con. plots.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.4
• /
• pp.300-304
• /
• 1993

This experiment was carried out to increase the utility and productivity of forage crop as to investigate the rotation system which is suitable to cultivat at the alpine area. The treatments were 9 crops combinations including corn - rye treatment. The results obtained were as follows: 1. Rye can be cultivated satisfactorily at cold and high altitude areas such as Tae Kwan Ryong. 2. Corn, to be raised as a second crop after rye in the same year, does not have to be early (short) or medium maturity varieties in the high alpine area. 3. It is possible to increase the harvest by 30% in terms of dry melter or green crop yield through raising two crops, rye and corn, in the same year. 4. Maturity period or growth conditions of corn. as a tropical crop and the best forage crop, can improve or worsen acording to the external circumstance, such as low temperature resulting from high atitude.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.121-125
• /
• 2012

This paper presents the friction and anti-wear characteristics of nano-oil with a mixture of a refrigerant oil and carbon nano-particles in the thrust slide-bearing of scroll compressors. Frictional loss in the thrust slide-bearing occupies a large part of total mechanical loss in scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the thrust bearing experimental apparatus for measuring friction surface temperature and the coefficient of friction at the thrust slide-bearing as a function of normal loads up to 4,000 N and rotating speed up to 3,200 rpm. It is found that the coefficient of friction increases with decreasing rotating speed and normal force. The friction coefficient of carbon nano-oil is 0.023, while that of pure oil is 0.03 under the conditions of refrigerant gas R-22 at the pressure of 5 bars. It is believed that carbon nano-particles can be coated on the friction surfaces and the interaction of nano-particles between surfaces can be improved the lubrication in the friction surfaces. Carbon nano-oil enhances the characteristics of the anti-wear and friction at the thrust slide-bearing of scroll compressors.