• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.415-417
• /
• 2003

본 논문에서는 휴대폰에서 실시간으로 사용할 수 있는 GIS 기반의 약도를 생성하는 기법을 소개한다. 휴대폰의 출력 창은 크기가 제한되어, 자세한 도로 정보들이나 건물 정보 등의 GIS 정보를 모두 출력 창에 표현하면 사용자들이 인식하기가 매우 어렵다. 그러므로, 출력창의 크기에 맞춘 간략한 약도를 제공하여 사용자들이 지리 정보를 손쉽게 활용할 수 있도록 도와주자는 것이다. 기존의 GPS와 지리 정보를 이용한 경로 탐색 및 안내 장비는 차량 운전자를 위한 도로 중심의 지리 정보를 제공한다. 우리나라 도로 환경에서는 휴대폰을 가진 보행자가 장소 찾기에 필요한 지리 정보를 원하는 경우도 않다. 그러므로 본 연구에서는 도보 통행자 및 대중교통 사용자들이 이용하기 편리하도록 지하철역이나 버스 정류장, 대형건물과 같은 이정표를 중심으로 하고. 장소 찾기에 필요한 도로만을 출력 창에 나타내어 단순화된 지리정보를 제공하고자 한다. 또한, 기존에 사용하던 방위 개념 중심의 지도들을 가지고, 지도 읽기에 익숙하지 않은 일반 보행자들이 길 찾기에 바로 사용하는 것은 쉽지 않다. 그러므로 수직 개념을 이용한 단순화된 도로 표현 기법을 사용하여 일반인도 쉴게 지도를 보고 길을 찾을 수 있도록 하였다. GIS 정보 중에서 필요로 하는 도로들을 선택하여 그 경로들을 수직선과 수평선에 가깝게 변형하고, 불필요한 도로를 생략, 지도를 단순화하였다. 또한 포함되어 있던 많은 정보들 중에서 일반적으로 보행자들이 길을 찾아갈 때에 참고하는 정보들을 제외한 나머지 정보들을 생략함으로써, 불필요한 정보로 인한 지도의 복잡도를 줄이고, 지리 정보의 가독성을 향상시켰다. 본 연구의 결과를 활용하면 휴대폰의 출력 창에는 이정표 중심의 약도를 표현할 수 있으므로, 약도 정보를 실시간으로 서비스할 수 있을 것으로 기대된다.성뿐만 아니라 보안성을 중요하게 생각하였으며, 앞으로 보안 관련 소프트웨어 개발에 사용될 수 있는 도구들이 가이드 라인에 대한 정보를 제공한다.용할 수 있는지 세부 설계를 제시한다.다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각 가장 낮았다. 2. 사산(死産)과 초생아사망(初生兒死亡)을 구분(區分)하여 고려해 볼때 사산(死産)은 모성(母性)의 임신력(姙娠歷)과 매우 밀접한 관련이 있는 것으로 사료(思料)되었고 초생아사망(初生兒死

• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.653-659
• /
• 2019

The purpose of this study is to measure the (air dose rate of radiation dose) the discharged patient who was administrated high dose $^{131}I$ treatment, and to predict exposure radiation dose in public person. The dosimetric evaluation was performed according to the distance and angle using three copper rings in 30 patients who were treated with over 200mCi high dose Iodine therapy. The two observer were measured using a GM surverymeter with 8 point azimuth angle and three difference distance 50, 100, 150cm for precise radion dose measurement. We set up three predictive simulations to calculate the exposure dose based on this data. The most highest radiation dose rate was showed measuring angle $0^{\circ}$ at the height of 1m. The each distance average dose rate was used the azimuth angle average value of radiation dose rate. The maximum values of the external radiation dose rate depending on the distance were $214{\pm}16.5$, $59{\pm}9.1$ and $38{\pm}5.8{\mu}Sv/h$ at 50, 100, 150cm, respectively. If high dose Iodine treatment patient moves 5 hours using public transportation, an unspecified person in a side seat at 50cm is exposed 1.14 mSv radiation dose. A person who cares for 4days at a distance of 1 meter from a patient wearing a urine bag receives a maximum radiation dose of 6.5mSv. The maximum dose of radiation that a guardian can receive is 1.08mSv at a distance of 1.5m for 7days. The annual radiation dose limit is exceeded in a short time when applied the our developed radiation dose predictive modeling on the general public person who was around the patients with Iodine therapy. This study can be helpful in suggesting a reasonable guideline of the general public person protection system after discharge of high dose Iodine administered patients.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.355-363
• /
• 2023

In safety assessment of a aged bridge, dynamic characteristics and displacement are directly related to the rigidity of the structural system, especially displacement is the most important factor as the physical quantity that the bridge user can directly detect. However, in order to measure the displacement of the bridge, it is difficult to install displacement sensors at the bottom of the bridge and conduct traffic blocking and loading tests, resulting in increased costs or impossible measurements depending on the bridge's environment. In this study, a method of measuring the displacement of a bridge using only accelerometers without installing displacement sensors and ambient vibration without a loading test was proposed. For the analysis of bridge dynamic characteristics and displacement using ambient vibration, the mode shape and natural frequency of the bridge were extracted using a TDD technique known to enable quick analysis with simple calculations, and the unit load displacement of the bridge was analyzed through flexibility analysis to calculate static displacement. To verify this proposed technology, an on-site test was conducted on C Bridge, and the results were compared with the measured values of the loading test and the structural analysis data. As a result, it was confirmed that the mode shape and natural frequency were 0.42 to 1.13 % error ratio, and the maximum displacement at the main span was 3.58 % error ratio. Therefore, the proposed technology can be used as a basis data for indirectly determine the safety of the bridge by comparing the amount of displacement compared to the design and analysis values by estimating the displacement of the bridge that could not be measured due to the difficulty of installing displacement sensors.

• Journal of Advanced Technology Convergence
• /
• v.2 no.3
• /
• pp.17-24
• /
• 2023

I am designing a research paper with the aim of studying hybrid vehicles. Hybrid vehicles, as the next-generation automobiles, feature a combination of internal combustion engines and battery engines, resulting in a revolutionary reduction in fuel consumption and harmful gas emissions compared to conventional vehicles. The electric motor in hybrid cars derives power from a high-voltage battery installed within the vehicle, which is recharged during vehicle motion. In contrast to traditional cars, which often experience energy losses due to idling caused by traffic congestion, hybrid systems optimize efficiency by skillfully managing the interplay between the internal combustion engine and the electric motor. This approach effectively addresses the inherent drawbacks of gasoline or diesel engines.Hybrid cars offer an array of benefits, including improved fuel efficiency, environmental friendliness, cost-effectiveness, and reduced noise emission. Consequently, they are progressively becoming a favored alternative among a growing number of individuals. This research endeavor has the potential to contribute towards curbing environmental pollution and dedicating efforts to future automotive research.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.247-257
• /
• 2014

This study proposes a new housing need and demand assessment model centering on small-scale housing development projects and happy house development projects that reflected the recent changes in rental and small sized apartment centered public housing policies and development paradigms. The housing need and demand assessment model of public housing development projects consists of quantitative evaluation factors such as potential need indicator and demand pressure indicator and qualitative evaluation factors such as local condition indicator. The potential need indicators of small sized housing development projects are calculated by subtracting the stock of already-supplied constructed rental and purchased rental housings from the potential quantity of need drawn from the small regions such as -eup, -myeon, and -dong. In the potential need indicators of happy house development projects, the potential need is calculated from those who are expected to receive a happy house in the unit of -si, -gun, and -gu. In small-sized housing development projects, demand pressure indictors are the number and the proportion of those who opened a subscription deposit, the number of those who received basic livelihood security and the number of those who were patriots and veterans. The demand pressure indicators of the happy house development projects are stock ratio of small-sized houses, rate of rise in housing rent price, level of housing rent price, and rate of monthly rent house.