• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권3호
• /
• pp.253-261
• /
• 2010

In this paper, the design and the fabrication of dual bandpass filter using heterogeneous resonators is presented. Each resonator would not have an effect on each resonant frequency. Two types of resonators are designed to have different fundamental resonant frequencies, one for the lower passband and the other for the upper passband. In the lower band, half and quarter wavelength resonators were used. In the upper band, a dual-mode resonator was used for adjusting bandwidth. In the upper pass band frequency, resonators of lower passband acts as the input and output. For WLAN, Proposed filters with different second passband frequencies at 2.45/5.2 GHz and 2.45/5.8 GHz are designed and fabricated.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3142-3144
• /
• 2000

청각시스템의 저전력 및 가격의 저렴화를 위해 달팽이관의 BM(Basilar Membrain)모델을 아날로그 VLSI 마이크로 파워 공정으로 구현하고 있다. Lyon and Mead는 실리론 공정으로 달팽이관 모델을 효과적으로 구현하였다. 이는 단순 직렬 연결된 구조로 각 채널의 지연시간의 차이로 인해 인식율이 떨어질 수 있다. 본 논문에서는 소리의 주파수 정보 추출기능을 하는 직렬 연결된 트리구조(TSBF:Tree-structured Cascaded Bandpass Filter)의 16채널의 아날로그 중간대역통과 필터회로를 CMOS VLSI 공정을 이용하여 설계하였다. 직렬 연결된 저대역통과필터와 고대역통과필터로 각 채널의 중간대역통과 필터를 구현하였다. 이러한 구조에서는 각 채널의 지연시간이 동일하므로 인식율을 높일 수 있다. 그리고 고대역통과필터를 1-poly 디지털 공정으로 구현 가능하고 기생 캐패시터의 영향을 적게 받는 구조로 설계하였다.

• Electrical & Electronic Materials
• /
• 제2권1호
• /
• pp.41-51
• /
• 1989

압전세라믹을 이용한 에너지포획형 단일체 대역통과필터는 '에너지포획'과 '탄생결합'이라는 두 중요한 원리를 사용한다. 본 연구의 주된 목적은 이중결합필터의 전극변수가 필터 특성에 미치는 영향을 규명하는 것이다. 예비단계로 에너지포획형 공진자의 부분전극의 단위 면적당 무게나 부분전극의 크기가 주파수특성에 미치는 영향을 조사하여 에너지포획을 야기시킬 수 있는 부분전극의 조건을 설정하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제13권10호
• /
• pp.4745-4750
• /
• 2012

In this paper a $6^{th}$ 1MHz~30MHz bandpass filter for Power line communication(PLC) modem receiver is designed using current mode synthesis method which is good to design the low-voltage and low-power filter. The designed bandpass filter is composed of cascade connecting between $3^{rd}$ Butterworth highpass filter and $3^{rd}$ Chebychev lowpass filter. As a core circuit in the current-mode filter, a current-mode integrator is designed with new architecture which can improve gain and unity gain frequency of the integrator. The gain and the unity gain frequency of the designed integrator is each 32.2dB and 247MHz. And the cutoff frequency of the designed $6^{th}$ bandpass filter can be controlled to 50MHz from 200KHz according to controlling voltage and the power consumption is 2.85mW with supply voltage, 1.8V. The designed bandpass filter was verified using a $0.18{\mu}m$ CMOS parameter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권1A호
• /
• pp.77-83
• /
• 2004

Parallel coupled microstrip bandpass filter is widely used in microwave circuits. But this filter limits the filter applications because of the narrow bandwidth and the spurious passband at twice the basic passband frequency. In order to solve this problem, a method of the asymmetrical coupled microstrip lines on composite dielectric substrate is presented. Closed form method is used to analyze the asymmetrical coupled microstrip lines on composite dielectric substrate. An experimental filter is fabricated over $33\%$ bandwidth centered at 9GHz. Compared with the filter on a single substrate, this filter on composite substrate shows improvement of the spurious passband.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권1호
• /
• pp.28-35
• /
• 2010

In this paper, we designed and fabricated a ultra-wideband(UWB) bandpass filter with a good performance of a stopband, and a notched band in passband. The transformed equivalent circuit of the highpass filter was realized by distributed element. A wide-passband with 3-dB fractional bandwidth of more than 100 % was achieved by using optimum response of the HPF. For improving lower and upper stopband characteristic, a cross coupling between feed lines was employed, which was analyzed by desegmentation technique. In order to reject interference of Wireless LAN and Hyper LAN(5.15~5.825 GHz), the narrow notched(rejection) band was realized by a spurline. The fabricated BPF indicated the passband from 3.1 to 10.55 GHz and the flat group delay of less than 0.94 ns over the entire passband except the rejection band. The filter shown sharp attenuation both inside and outside the band and notched band from 5.2 to 6.12 GHz.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제54권5호
• /
• pp.128-132
• /
• 2017

In this thesis, a BPF(band-pass filter) at the center frequency of 2.14GHz, and bandwidth of 20MHz is designed and implemented using high Q dielectric resonators with ${\varepsilon}_r=38$. The DR(dielectric resonator) is resonated by $TE_{01{\delta}}$-mode and it has a hole in the center of DR. The BPF consists of 6-poles dielectric resonators and the characteristic of elliptic function is obtained by non-adjacent coupling. It has the average insertion loss of 0.97dB and the return loss over 25dB in its passband. In this thesis, the frequency selectivity is more improved by the coupling characteristics between non-adjacent resonators than that of dielectric resonator filters with a Chebyshev response.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제26권6호
• /
• pp.1-6
• /
• 1989

Narrowband bandpass weveguide filters using inductive post obstacles in rectangular waveguide are designed and constructed to have an equal-ripple bandwidth of 50MHz (0.56% fractional band-width) at a center frequency of 9GHz. Both the triple-post and the single-post configurations are realized and compared. The measured center frequency, bandwidth, and attenuation characteristics for both filters show good agreement with the theoretical calculations. When the two filters are compared, the insertion loss characteristic of the triple-post filter is better than that of the single-post filter by 0.8dB at the passband.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• 제42권4호
• /
• pp.69-76
• /
• 2005

In this paper, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TM_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of If modes. The size and location of intercavity slot is determined by the coupling equation from E-and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.227-229
• /
• 2002

In this paper, we report on a microstrip line voltage controlled tunable bandpass filter. We used the characteristic the relative dielectric constant of thin film ferroelectrics depends on the applied dr voltage. we designed using Au/BSTO/MgO/Au structure. We cascaded many resonators for large furling range sustaining 1 GHz renter frequency, narrow band, low IL ($\leq$4 dB). We could design the BPF of which center frequency is 16 GHz, 1.9 GHz tuning range, the narrow bandwidth within 800 MHz, low insertion loss less than 3 dB by adjusting the gap of 3 cascaded resonators.