• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.145-150
• /
• 2011

Presently, mass concrete structures are being built in federal and private projects of civil infrastructures and building structures. The hydration heat of mass concrete structures is the most important factor in the quality of concrete matrix and construction period. Moreover, internal cracks caused by hydration heat degrades durability, water tightness, and strength of concrete. To reduce hydration heat, it is necessary to blend belite cement (${\beta}-C_2S$) with industrial by-products (i.e. granulated slag and fly ash). In this experiment, 14 levels of binary binders and 4 levels of ternary binders were used to understand the effect of different replacement ratio on hydration heat, strength and microstructure (i.e. SEM and XRD) of mortar. Cumulative hydration heat at 28 days for the binary and ternary binders was affected by replacement ratio of fly ash and/or granulated slag. As fly ash content increased, hydration heat decreased. As granulated slag content increased, reduction rate of the hydration heat was lower than when fly ash was used. Especially, the hydration heat of ternary binder blended with 40% flyash and 30% granulated slag showed about 50% of hydration heat from using belite cement (P). The study results showed that the temperature rise of concrete matrix can be decreased by using blended belite binders producing low hydration heat and reasonable strength.

• Journal of Engineering Education Research
• /
• v.10 no.4
• /
• pp.78-92
• /
• 2007

This study presents how the engineering ethics instructional modules have been developed based on Korean culture and how they are implemented into the existing engineering curricula at Sungkyunkwan University. The engineering ethics instructional modules were designed to be taught by engineering faculty members who did not have any teaching experience in ethics. As a result, it was determined that the engineering ethics instructional modules should include a detailed instructor lesson plan and all supporting resources such as slides (Power Point base), and handouts, or assessment units (pre- and post-test). Two 75 minute modules developed in this study consist of the diverse instructional activities for various student group sizes. In order to improve students' interests and classroom attention, various visual and audio resources such as famous movies, cartoons, and poems were included in the instructional resources. In addition, a number of case studies which might happen in the students' daily lives were chosen. The resulting ethical module No. 1 has been instructed in the existing engineering classes during the 1st semester in 2007. Overall, the students reported positive impressions of the modules and the faculty members also reported favorable perceptions of the modules. Also, team based activities encouraged students to participate in constructing the event trees, which are a basic analysis tool for ethics case studies. The results of this study will provide a guideline of implementing engineering ethics into the engineering curricula to other engineering programs and schools.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1997.04a
• /
• pp.269-279
• /
• 1997

An investigation was peformed to study the predicting the joint strength of mechanical fasteners. Bearing failure is most important failure mode for designing joint. So in this study, the prediction method in consideration with bearing failure was chosen. In the proposed method, the characteristic length is combined with the Yamada-Sun failure criterion, Tsai-Hill failure criterion and characteristic length for Tension and Compression is determined from investigation. Especially the length of compression is determined from the "bearing failure test" that newly conceived to take bearing failure into consideration. The proposed prediction method was applied to quasi-isotropic carbon/epoxy joint showing net-tension and bearing failure experimentally. Good agreement was found between the predicted and experimental result for each joint geometry.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.105-119
• /
• 1976

Sucrose, glucose, starches hydrolyzates and raw starchy materials hydrolyzates were caramelized using various catalysis and the caramel products were analysed, in order to carry out the basic research for the replacement of caramel coloring. The results obtained were summarized as follows. 1. The caramel which was manufactured by sucrose syrup being pH 3.5 adjusted by sulfuric acid showed strong color intensity and hue as well as good stability in the solutions of table salt, tannin and alcohol. 2. The product caramelized from sucrose syrup being pH 9.5 adjusted by sodium carbonate showed very strong color intensity and black color component, and was quite stable in alcohol solution but not in table salt and tannin solutions. 3. The caramel products made from sucrose syrup using ammonium salts of strong acid like $NH_4Cl$ and $(NH_4)_2SO_4$ as catalyst showed strong color intensity and black color component but hazy apparence in solution of table salt, tannin and alcohol. 4. The product caramelized from glucose syrup being pH 9.5 adjusted by sodium carbonate indicated strong color intensity but weak red color component and was transparent in solution of table salt and alcohol but hazy in tannin solution. 5. In glucose caramel using $NH_4Cl$, $(NH_4)_2SO_4$, $(NH_4)_2CO_3$ and $(NH_4)_2SO_3$ as catalyst, $NH_4Cl$ plot was very weak in color intensity and insufficient in red color component but stable in solution of table salt, tannin and alcohol. In the case of $(NH_4)_2CO_3$, $(NH_4)_2SO_4$ and $(NH_4)_2SO_3$ plots, all products were strong in color intensity but little insufficient in red color component. On the stability in solutions, $(NH_4)_2SO_3$ plot was stable in two solutions expect tannin solution, $(NH_4)_2CO_3$ plot was only stable in alcohol solution and $(NH_4)_2SO_3$ plot was only stable in table salt solution. 6. When the acid hydrolyzed starch syrups without neutralization were caramelized using $(NH_4)_2SO_4$ as catalyst, the potato starch hydrolyzate caramel showed higher in color intensity being similar to its of glucose caramel than sweet potato starch hydrolyzate caramel and corn starch hydrolyzate caramel. 7. Dried sweet potato powder, dried acorns powders, the acorns (from Q. serrata THUNB and Q. acutissima CARR.) powders extracted with water for 7 days and with 50% alcohol solution for 24 hrs were hydrolyzed by sulfuric acid in autoclave at $3.5kg/cm^2$ as pressure for 60 mins, and were caramelized using $(NH_4)_2SO_4$ as catalyst. It was supposed that all of those products were poor quality on color and stability in solutions at the viewpoint of food coloring matter.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.67-75
• /
• 1976

This experiment was studies for grassland establishment on west coastal saline land in Korea from May 1975 to March 1976 and used seeds were introduced from Australia. The results of adaptability were summarized as follow. 1. The seeds germination percentage was not influence in 0.5% salt included, but delayed days in 1% salt included and decreased germination percentage. 2. Any experimental grasses species were not growth on the 0.5% salt included soil and also growth was much damaged on the 0.05% salt included soil. It was suggested that $Mg^+$, $K^+$ ions involved with $Na^+$ ion. 3. The yield of grasses were much decreased on 0.05% salt included soil which compared control group. The yield rate of decrease were 30% in kikuyu, 60% in strawberry clover, 63% in reed canarry and 89% in orchard grass. 4. For winter-hardness test, nearly all the species well overwintered but except kikyu. 5. One of salt tolerance native grass (Agrostis distans crieseb var coreensis, Hackel) was discovered in saline area, and it was growth from middle of May to Middle of September. Also it was known that the native grass was good feed stuff but it was not so long in growth life. 6. It was concluded that more experimental work must be carried out to select of salt tolerance grass for grassland establishment on saline by introduce some more species such like saltgrass, saltbush, shadsclae from foreign land.

• Journal of the Daesoon Academy of Sciences
• /
• v.32
• /
• pp.31-76
• /
• 2019

Lee Sang-ho published Jeungsan Cheonsa Gongsagi (Records of the Holy Works of Celestial Master Jeungsan) in 1926. Then, after complementing the book with additional materials, he published Daesoon Jeon-gyeong in the form of a religious scripture. Since then, Daesoon Jeon-gyeong has been expanded to a sixth edition which was published in 1965. The Haengnok of Daesoon Jinrihoe's The Jeon-gyeong, which was published decades later than Daesoon Jeon-gyeong describes Sangje's whole life year by year in five chapters starting from his descent to the human world all the way to his passing into heaven. It comprehensively contains the essential contents of other chapters from The Jeon-gyeong. This paper was written for the following three goals: first, to study the contents of Haengnok that summarize Sangje's life. Second, to see how its contents are related to descriptions from the other six chapters. Lastly, to discuss how certain verses have been changed from the way they appeared Daesoon Jeon-gyeong. When we compare these two scriptures, there are some verses that are found only in the Haengnok section of The Jeon-gyeong. For example, the verse that explains how Sangje's family name 'Kang' originated and how his ancestors came to live in Gobu area is described only in The Jeon-gyeong. The origin of the family name Kang is considered important because he descended into the world as a human bearing the family name Kang, and it is included in his official name that represents his divine position. Also, unique to The Jeon-gyeong are verses such as those describing "Samsin San (the three holy mountains) in the area where Sangje descended to and verses about the historical change of place names in the areas where Sangje lived. These verses have great significance in terms of their mystical aspects within Daesoon Thought. Secondly, the record about Sangje's Holy Works at Siru Mountain in The Jeon-gyeong is not found in Daesoon Jeon-gyeong. The Holy Works at Siru Mountain are important because they provide proof of Sangje's major activities during the period between his 3-year travel around the country and his Cheonji-gongsa (Reordering Works of the Universe). Next to be observed are some changes in verses that can be seen when comparing The Jeon-gyeong to Daesoon Jeon-gyeong. Of particular impostance here are the story of Sangje's Holy Work called 'King in White Cloth and General in White Cloth' and the description of Sangje's passing into heaven. Both records contain key changes that distinguish The Jeon-gyeong from Daesoon Jeon-gyeong.