• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.809-820
• /
• 2017

Efficient management of large-size wastes generated from disasters etc. is always in demand. Large-size wastes are closely connected to the environment, producing adverse effects on the air quality, water quality, living environment and so on. When large-size wastes are generated, we must be able to estimate the generated amount in order to transfer them to a temporary trans-shipment site, or to properly treat them. Currently, we estimate the amount of generated large-size wastes by using satellite images or unit measure for wastes; however, the accuracy of such estimations have been constantly questioned. Therefore, the present study was performed to establish three-dimensional spatial information based on UAS, to measure the amount of waste, and to evaluate the accuracy of the measurement. A measurement was made at a waste site by using UAS, and the X, Y, Z RMSE values of the three-dimensional spatial information were found to be 0.022 m, 0.023 m, and 0.14 m, all of which show relatively high accuracy. The amount of waste measured using these values was computed to be approximately $4,273,400m^3$. In addition, the amount of waste at the same site was measured by using Terrestrial LiDAR, which is used for the precise measurement of geographical features, cultural properties and the like. The resulting value was $4,274,188m^3$, which is not significantly different from the amount of waste computed by using UAS. Thus, the possibility of measuring the amount of waste using UAS was confirmed, and UAS-based measurement is believed to be useful for environmental control with respect to disaster wastes, large-size wastes, and the like.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1037-1051
• /
• 2020

The accurate monitoring and forecasting of the intensity of tropical cyclones (TCs) are able to effectively reduce the overall costs of disaster management. In this study, we proposed a multi-task learning (MTL) based deep learning model for real-time TC intensity estimation and forecasting with the lead time of 6-12 hours following the event, based on the fusion of geostationary satellite images and numerical forecast model output. A total of 142 TCs which developed in the Northwest Pacific from 2011 to 2016 were used in this study. The Communications system, the Ocean and Meteorological Satellite (COMS) Meteorological Imager (MI) data were used to extract the images of typhoons, and the Climate Forecast System version 2 (CFSv2) provided by the National Center of Environmental Prediction (NCEP) was employed to extract air and ocean forecasting data. This study suggested two schemes with different input variables to the MTL models. Scheme 1 used only satellite-based input data while scheme 2 used both satellite images and numerical forecast modeling. As a result of real-time TC intensity estimation, Both schemes exhibited similar performance. For TC intensity forecasting with the lead time of 6 and 12 hours, scheme 2 improved the performance by 13% and 16%, respectively, in terms of the root mean squared error (RMSE) when compared to scheme 1. Relative root mean squared errors(rRMSE) for most intensity levels were lessthan 30%. The lower mean absolute error (MAE) and RMSE were found for the lower intensity levels of TCs. In the test results of the typhoon HALONG in 2014, scheme 1 tended to overestimate the intensity by about 20 kts at the early development stage. Scheme 2 slightly reduced the error, resulting in an overestimation by about 5 kts. The MTL models reduced the computational cost about 300% when compared to the single-tasking model, which suggested the feasibility of the rapid production of TC intensity forecasts.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2005

The soil properties of the royal tombs (managed by cultural properties administration) located in Seoul and suburban Gyonggi area were investigated to see the influence of the change in soil environment on the royal tomb s이I. To compare the soil chemical properties of four royal tombs soil of Changdeokgung, Jongmyo, Seooneung, and Dongguneung, pH, organic content, available phosphate, extractable calcium, extractable potassium, extractable magnesium, cation exchange capacity, degree of base saturation, and total nitrogen content were measured. The concentrations of Cd, Pb, and Cu measured as the degree of heavy metal contamination can be an indication of atmospheric pollution in the soil environment. To estimate the degree of soil compaction, soil hardness, pore space, porosity, bulk density, and soil atmosphere were analyzed. Through these studies, following conclusions were made: 1. The soil hardness and pore space which can be used as indexes of soil compaction, were worse in the soil of Seooneung than in those of Changdeokgung and Dongguneury. These phenomena seem to be the result of increase in visitors in Seooneung and Dongguneung better and soil management in Changdeokgung and Dongguneung. When three different regions of forest area, prohibited area, and soil compaction area in Seooneung soil were compared, the degree of compaction in the forest area was less than compaction area, indicating the need for the employment of soil resting period in the compaction area. 2. The pH measurements of all four royal tombs soil were higher in top soil than sub soil. The higher soil pH values in Jongmyo and Seooneung seem to result from the application of soil conditioner. In the case of Seooneung, the values for soil pH and organic content were higher in the forest area than those in compaction area. It is thought that active soil management was employed in the forest area through application of organic matters and soil conditioners. 3. The heavy metal contents from soil of Changdeokgung and Jongmyo were higher than that from soil of Dongguneung. Since Changdeokgung and Jongmyo are located inside Seoul, it is thought that the high level of heavy metal concentrations in these royal tomb soil is the result of accumulation of pollutants from the city.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.123-133
• /
• 2007

This study analyzed whether a transit network with hierarchy is efficient or not, and if transit network hierarchy has cost efficiency, then which condition guarantees the efficiency of the transit network hierarchy. The authors modeled the total cost of the transit network and suggested the conditions in which the transit network hierarchy has cost efficiency through comparing the cost of the transit network with and without hierarchy. The efficiency of transit network hierarchy is guaranteed when the travel cost savings induced by using a higher hierarchy transit network is larger than the increasing non-travel cost, which is the sum of access cost, waiting cost, and operating cost, induced by the introduction of a higher hierarchy transit network. This result is consistent with common sense and with the concept of cost and benefit analysis. If a passenger traveling within the area divided by a higher hierarchy transit network uses only a lower hierarchy transit network and the passenger traveling out of the area divided by the higher hierarchy transit network uses both lower and higher hierarchy transit networks, the travel demand using the higher hierarchy transit network is inversely proportional to the square of the line spacing. This means that the transit network becomes more efficient and small increases of travel demand guarantee the efficiency of the transit network hierarchy as the connectivity of the network becomes higher. This result shows that transit networks have economies of aggregation. This study is the first analytical research on transit network hierarchy and is expected to be a basis for numerical research. However, numerical research should complement this study, since analytical research has some limitations for considering a real network.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.5
• /
• pp.289-296
• /
• 2001

The main objective of this topic is to establish strategies and to plan biotechnology researches which are related to the agricultural improvements especially focusing on the crop breeding in Korea. From 1960's to 1980's government policy had been emphasized to develope high yielding cultivars for the self sufficient supply of the staple food crops. As a result, considerable increase of rice production has been made with accumulating technology and man's powers. Recently genetically modified crops harboring useful characteristics have been developed using biotechnology and released in the developed countries. National research institutes and private companies have been developed biotechnology researches to establish competitive capabilities, however they have not been successfully used in commercialization. Therefore it is necessary to promote the practical. application by connecting molecular technology with conventional breeding. Proposed research projects are; (1) basic researches including plant genome studies, (2) developing new cultivars through gene transformation, (3) screening and producing antioxidants, secondary metabolite substances and edible vaccines. To set a government policy, both domestic and international research trends were reviewed and possibility of success based on the economic view point were discussed. The intellectual property and preservation of environment play a key role to decide the research priority. It is also necessary for us to make one step system for the distribution of research resources such as microorganisms, genes cloned, plant seeds and research informations for promoting research activities.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.1 s.45
• /
• pp.117-134
• /
• 1994

The effects of regional medical insurance on utilization of medical care in urban population was examined in this study. The data was collected in a 2-year follow-up household survey conducted at Taegu city before and after implementation of the regional medical insurance. The study population was divided into 2 groups. Cohort I was the uninsured in 1989 and cohort II was the insured in 1989. After the coverage of medical insurance, physician visit rate per 1,000 population, use-disability ratio and use-restricted activity ratio in cohort I were increased compared to cohort II in both of acute and chronically ill people. The use-disability ratio and use-restricted activity ratio of the insured poor were lower than those of the insured nonpoor in both of cohort I and cohort II. The major reasons for pharmacy use were accessibility and affordability before the coverage of medical insurance in cohort I, however, after the coverage of medical insurance, the important reason was accessibility rather than affordability. In logistic regression analysis of physician visit, the significant independent variables were acute illness episode (+), chronic illness episode (+) and income (+) in both of cohort I and cohort II. In cohort I, after the coverage of medical insurance, more people replied that the medical cost of hospital and clinic was reasonable. The people who covered by the regional medical insurance were more dissatisfied with the imposed premium than those who covered by other types of medical insurance in both of cohort I and cohort II. More people in cohort II than cohort I were dissatisfied with the services from hospitals and clinics after implementation of the regional medical insurance. In conclusion. after the coverage of medical insurance, the gap between the poor and the nonpoor still exists in terms of medical care utilization.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.13-18
• /
• 2008

Purpose: The image processing method due to the algorism which is various portion nuclear medical image decision is important it makes holds. The purpose of this study is it applies hereupon new image processing method SIEMENS (made by Pixon co.) Onco. flash processing reconstruction and the comparison which use the image control technique of existing the clinical usefulness it analyzes with it evaluates. Materials & Methods: 1. Whole body bone scan-scan speed 20 cm/min, 30 cm/min & 40 cm/min blinding test 2. Bone static spot scan-regional view 200 kcts, 400 kcts for chest, pelvis, foot blinding test 3. 4 quadrant-bar phantom-20000 kcts visual evaluation 4. LSF-FWHM resolution comparison ananysis. Results: 1. Raw data (20 cm/min) & processing data (30 cm/min)-similar level image quality 2. Low count static image-image quality clearly improved at visual evaluation result. 3. Visual evaluation by quadrant bar phantom-rising image quality level 4. Resolution comparison evaluation (FWHM)-same difference from resolution comparison evaluation Conclusion: The study which applies a new method Onco. flash processing reconstruction, it will be able to confirm the image quality improvement which until high level is clearer the case which applies the method of existing better than. The new reconstruction improves the resolution & reduces the noise. This enhances the diagnostic capabilities of such imagery for radiologists and physicians and allows a reduction in radiation dosage for the same image quality. Like this fact, rising of equipment availability & shortening the patient waiting move & from viewpoint of the active defense against radiation currently becomes feed with the fact that it will be the useful result propriety which is sufficient in clinical NM.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.510-514
• /
• 2007

This study was carried on cool and RT(room temperature) storage of unhulled rice. In RT storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and breakdown, setback and protein content. high significant negative coefficients were showed setback and breakdown, breakdown and protein content. In cool storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and amylose content and gelatinization start temperature and protein content and high significant negative coefficients were showed toyo index and whiteness, toyo index and gelatinization start temperature, gelatinization start temperature and amylose content. In RT storage of a path coefficient analysis, a highest positive direct influence was observed in amylose content and a highest negative direct influence was protein content. Positive indirect influence was high revealed breakdown and protein content and negative indirect influence was gelatinization start temperature and Mg/K ratio. In cool storage of a path coefficient analysis, a highest positive direct influence was whiteness and a highest positive indirect influence was gelatinization start temperature. Positive indirect influence was high revealed gelatinization start temperature and amylose content, negative indirect influence was whiteness and gelatinization start temperature. In RT storage of Multiple regression equation of Toyo index based on physicochemical properties of unhulled rice, a highest coefficient of determination was revealed among five facters of whiteness, protein content, Mg/K ratio, amylose content and gelatinization start temperature. In cool storage of Multiple regression equation of toyo index based on physicochemical properties of unhulled rice, highest coefficient of determination was revealed among five facters of moisture content, amylose content, gelatinization start temperature, breakdown and setback.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.299-308
• /
• 2000

A model experiment on the anchovy boat seine was carried out in the southern sea of korea to analyze the vertical opening and the underwater geometry. The model net A was made of half size in the length and width of the prototype net. The model net B was attached floats and chain to the model net-A. The vertical opening and the underwater geometry of the model net were determined by distance of Minilog position with the combinations of the distance between paired boats and the towing speed. The results obtained can be summarized as follows; 1. Vertical opening of the model net was gradually lowered according to the increase of the distance between paired beats and the towing speed. 2. Vertical opening of Wing net, In side wing net, Square, Fore bag net, Flapper and After bag net of the model net A according to the distance between paired boats were varied in the range of 10.8~9.0, 12.0~8.3, 12.6~9.0, 10.4~6.6, 4.6~5.2, 8.8~7.7m respectively, varied in the range of 36~30, 21~15, 31~22, 80~51, 80~96, 59~51% of the normal opening respectively 3. Vertical opening of Wing net, In side wing net, Square, Fore bag net, Flapper and After bag net of the model net B according to the distance between paired boats were varied in the range of 9.1~8.5, 9.8~6.5, 11.2~8.0, 11.0~8.1, 4.7~5.0, 7.0~7.5m respectively, varied in the range of 30~28, 18~12, 27~20, 85~62, 87~93, 47~50% of the normal opening respectively 4. Vertical opening of each a part of the model net according to the towing speed was as same as the former. 5. Model net was appeared apparent the pocket shape, because Wing net and Inside wing net was opened 30% of the normal opening. 6. The bosom and the bag net of the model net A were risen up to the upper lazer, this phenomenon was more apparent as the distance between paired boats and the towing speed increase, but the model net B was almost constant. 7. Working depth of the model net was gradually hallowed according to the increase of the distance between paired boats and the towing speed

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.37-42
• /
• 2006

The current study was conducted to investigate the effect of types of crate and season on transport condition and mortality, and ultimately to identify the best practice for reducing economic lose. Total loading weight stocking density, transport and lairage times and mortality were surveyed from the management data sheet of two companies for each first week of January, April, August and October, An average loading weight, length of transport and lairage times and mortality were 3.9 ton, 96 min, 478 min and 0.6%, respectively. Mortality after lairage was not significant between two types of crate. In addition, container type crate showed higher loading weight and stocking density than box type one. Spring and winter had significantly higher mortality with 0.7 and 0.8%, respectively, then summer and fell of 0.5%. An interaction between crate type and season on mortality showed that mortality for box type on was higher in spring and winter with 0.8 and 0.7%, respectively, compared to summer and fall of 0,3 and 0.4% respectively. In the case of container type crate, spring, fall and winter had greatly different death into with 0.7, 0.5 and 0.8%, respectively, while there was no difference between spring and summer, and between summer and winter, Mortality after transportation was similar between both crate type, with higher rate for spring and winder than other seasons. The result was likely related to death of exposure due to extended waiting time without heating facility.