• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.267-274
• /
• 2011

The environmental impacts of 95% remediation of a total petroleum hydrocarbon-contaminated soil were evaluated using life cycle assessment (LCA). LCA of two remediation systems, soil vapor extraction (SVE) and biopile, were conducted by using imput materials and energy listed in a remedial system standardization report. Life cycle impact assessment (LCIA) results showed that the environmental impacts of SVE were all higher than those of biopile. Prominent four environmental impacts, human toxicity via soil, aquatic ecotoxicity, human toxicity via surface water and human toxicity via air, were apparently found from the LCIA results of the both remedial systems. Human toxicity via soil was the prominent impact of SVE, while aquatic ecotoxicity was the prominent impact of biopile. This study also showed that the operation stage and the activated carbon replacement stage contributed 60% and 36% of the environmental impacts of SVE system, respectively. The major input affecting the environmental impact of SVE was electricity. The operation stage of biopile resulted in the highest contribution to the entire environmental impact. The key input affecting the environmental impact of biopile was also electricity. This study suggested that electricity reduction strategies would be tried in the contaminated-soil remediation sites for archieving less environmental impacts. Remediation of contaminated soil normally takes long time and thus requires a great deal of material and energy. More extensive life cycle researches on remedial systems are required to meet recent national challenges toward carbon dioxide reduction and green growth. Furthermore, systematic information on electricity use of remedial systems should be collected for the reliable assessment of environmental impacts and carbon dioxide emissions during soil remediation.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.460-472
• /
• 1994

This study has been conducted to give some ideas for reasonable ecological management of Taejon city and its adjacent forest ecosystem against the effect of acid rain. Rain monitoring points to analyse its components represented 1 point in industrial area, 4 points in commercial area, 4 points in residential area, and 5 points in suburban area and forest survey was done in 7 forest sites adjacent to rain monitoring points. Transformed vegetation index(TVI) based on Landsat TM data was analysed for forest area. Taejon area was seriously contaminated by air pollutants and average concentration of anions in precipitation were 20.16mg/l for $SO_4{^{2-}}$, 3.65mg/l for $NO_3{^-}$, and 3.09mg/l for $Cl^-$. Anion in precipitation were $1.09mg/m^2/month$ for $SO_4{^{2-}}$, $0.23mg/m^2/month$ for $NO_3{^-}$, and $0.20mg/m^2/month$ for $Cl^-$. Cation in precipitation were $0.14mg/m^2/month$ for $Ca^{2+}$, $0.10mg/m^2/month$ for $NH_4{^+}$, $0.08mg/m^2/month$ for $Na^+$, $0.07mg/m^2/month$ for $K^+$, and $0.08mg/m^2/month$ for $Mg^{2+}$. The region with the highest concentration of $SO_4{^{2-}}$, $NO_3{^-}$, and $Cl^-$ in rain was industrial area. $SO_4{^{2-}}$, $NO_3{^-}$, and $Cl^-$ concentrations in industrial area were 43.08, 3.88, and 3.64ppm, respectively. Forest soil showed strongly acidic ranging pH4.16-4.94. Transformed vegetation index(TVI) were 3.11 in Dangsan, 4.00 in Kyechoksan, 4.13 in Bomunsan, 4.18 in Kabhasan, 3.34 in Bongsan, 4.13 in Sikchangsan, and 4.20 in Seongchisan. Dangsan forest located near in industrial area showed the lowest TVI.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1107-1115
• /
• 2009

The strengthened regulations for atmospheric emissions from ships like MARPOL Annex VI have caused a necessity of new, alternative power system in ships for the low pollutant emissions and the high energy efficiency. This paper attempts to investigate the configuration of SOFC/GT hybrid power system for marine applications like LNG tanker and to analyze the influence of design parameters on the system performance. The simulation results provide the basic data for the design and efficiency improvement of SOFC/GT hybrid system and indicate the guidelines for the safe system operation.

• Environmental and Resource Economics Review
• /
• v.18 no.3
• /
• pp.523-544
• /
• 2009

The purpose of this paper is to estimate the impact of foreign direct investment on environmental performance for 27 OECD countries using endogenous environmental policy model. The empirical test shows that with 1% increase in the ratio of inflow stock of foreign direct investment over domestic capital stock, emission on NOx and $CO_2$ will increase by 0.0071%(NOx) and 0.0165%($CO_2$) and 1% increase in the ratio of foreign capital stock induces 0.044%(fixed effect) and 0.047%(random effect) of economic growth. 1% increase of per labor total output increases 2.038%(fixed effect) or 1.890%(random effect) in reinforcement of environmental regulation. However, we could not confirm the Porter's hypothesis that the more strong environmental regulation leads technical innovation. The scale effects (0.0119, 0.0172) are estimated higher than the technical effects (-0.0048, -0.0007) in two pollutants (NOx, $CO_2$). It implies that each country needs to increase pollution abatement and control expenditure more aggressively to protect environment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.151-159
• /
• 2015

Paper records were generally degraded by some factors from atmospheric environments, like temperature, relative humidity or air pollutants. In this study, the degradation behavior of paper records by single or mixed gases of $NO_2$, $SO_2$, HCHO and TVOC was evaluated. The mechanical, optical and chemical properties of 4 kinds of paper (acid and neutral-based printing paper, traditional Hanji, and filter paper) were directly and indirectly affected by gaseous harmful materials. The brightness and $L^*$ value in all papers were slightly increased by accelerated aging under gaseous HCHO and TVOCs, but highly decreased by conditions under gases $NO_2$ and $SO_2$. The optical properties of paper records were most vulnerable in acid-based paper and high stable in filter paper and traditional Hanji by air pollutant degradation. The aging treatments under mixed gas pollutants including $NO_2$ resulted in decrease of physical, mechanical and optical properties of paper, so it was supposed that the concentration of $NO_2$ gas would be strictly controlled for optimum indoor air quality management in domestic storage centers for paper records.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.73-81
• /
• 2011

The performance of emission factor has been validated by comparison with on-road test data. Emission factor, which is a function of vehicle speed, has been acquired based on chassis dynamometer test with NIER driving pattern. Portable Emission Measurement System, PEMS has measured on-road emission. Test vehicle was operated on defined test routes under different driving conditions, and made ten trips along its route. Emission factors properly simulate on-road test result, although there is some drawback to consider variety of driving condition on real world. Vehicle specific power and acceleration have been used to explain the distributed on-road result within same vehicle speed range. The trend in carbon dioxide and nitrogen oxide emission with respect to specific power and acceleration is clear. It has been found that specific power is a good explanatory variable for microscopic analysis for modal test result. Acceleration is good for microscopic as well as macroscopic analysis.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.206.2-206.2
• /
• 2010

현재 RPF 생산공정에서 생산된 RPF는 약 7,500~8,500kcal/kg 의 높은 열량을 지니고 있다. 이러한 특성으로 연소시 소각로 내부의 온도가 부분적으로 급격히 상승하여 적정온도조절이 어렵고, 로내 장치들의 내구성이 저하되는 등 문제가 발생하고 있다. 또한, RPF에 포함된 비교적 높은 농도의 염소 함량(0.8~1.8% wt)으로 인해 다량의 대기오염물질이 발생되는 단점이 나타나고 있다. 따라서, 이러한 문제점들을 개선하기 위해 RPF의 개질이 필요하며 본 연구에서는 슬러지와 RPF를 혼합하여 열량, 성형성, 염소함량등을 고려하여 최적의 혼합비율을 선정하였다. J하수처리장에서 발생하는 하수슬러지를 이용하여 5, 15, 25, 30, 35%를 RPF 성형공정에 혼합하여 실험하였다. 5% 혼합시 발열량은 약 6,300~6,800kcal/kg, 염소농도는 0.8~1.6%(wt), 15% 혼합시 발열량은 5,500~6,000kcal/kg, 염소농도는 0.7~1.4%(wt), 25% 혼합시 발열량은 5,200~5,900kcal/kg, 염소농도는 0.6~1.1%(wt), 30% 혼합시 발열량은 5,000~5,700kcal/kg, 염소농도는 0.6~1.0%(wt), 35% 혼합시 발열량은 4,800~5,200kcal/kg, 염소농도는 0.4~0.6%(wt)으로 나타났다. 각 혼합비율에서 관찰된 성형성은 5~25% 혼합까지는 성형된 RPF와 유사하게 일정한 크기 및 강도를 유지 할 수 있었으나, 25% 이상 혼합시 분말형태의 가루가 많이 발생되며 강도가 약해져 쉽게 부스러지는 문제점등이 나타났다. 연료의 개질 형태나 성형성등을 고려하였을 때 슬러지 혼합비율이 약 15~25% 정도가 최적 혼합비율인 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.185.1-185.1
• /
• 2010

원격탐사(remote sensing)란 관측 대상과의 접촉 없이 멀리서 정보를 얻어내는 기술을 말한다. 기상관측분야에는 이미 소다(SODAR) 장비가 폭넓게 사용되거 왔으나 최근 풍력자원평가(wind resource assessment)를 위한 풍황측정에 SODAR와 더불어 라이다(LIDAR)가 적극적으로 활용되기 시작하고 있다. 참고로 SODAR(SOnic Detection And Ranging)는 수직 및 동서 남북 방향으로 음파를 발생시키고 대기유동에 의해 산란 반사된 에코를 수신하여 진동수 변화와 반사에코 강도를 측정하여 각 방향의 에코자료를 벡터 합성함으로써 풍향 및 풍속을 산출하는 원리이다. 반면 LIDAR(Light Detection And Ranging)는 비교적 최근에 풍황측정 용도로 개발된 레이저 탐지에 바탕을 둔 원거리 센서로, 공기입자(먼지, 수증기, 구름, 안개, 오염물질 등)에 의해 산란된 레이저 발산의 도플러 쉬프트(Doppler shift)를 이용하여 풍향 및 풍속을 측정하는 원격탐사 장비이다. 풍력자원평가 측면에서 라이다는 그 정확도가 IEC61400-12에 의거한 풍황탑(met-mast) 측정자료 다수와의 비교검증 실측평가(Albers et al., 2009)를 통하여 입증된 바 있다. 한편 한국에너지기술연구원에서 운용 중인 라이다 시스템은 그림 1의 우측 그림과 같이 1초에 $360^{\circ}$를 스캔하여 50지점에서 반사되는 레이저를 스펙트럼으로 측정하되 설정된 관측높이에서 풍속은 샘플링 부피(sampling volume)의 평균값으로 정의된다. 그런데 샘플링 부피는 설정된 관측높이로부터 상하 12.5m, 총 25m의 높이구간에서 관측한 스펙트럼의 평균값을 그 중앙지점에서의 풍속으로 환산하는 알고리듬(algorithm)을 채택하고 있다. 따라서 비선형적으로 변화하는 풍속연직분포 관측 시 풍속환산 알고리듬에 의한 측정오차가 개입될 가능성이 존재하는 것이다. 이에 본 연구에서는 라이다에 의한 풍속연직분포 측정 시 샘플링 부피의 구간 평균화 과정에서 발생하는 불확도(uncertainty)를 정량적으로 분석함으로써 라이다에 의한 풍속연직분포 관측의 불확도를 정량평가하고자 한다.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.1_2
• /
• pp.21-33
• /
• 1999

A large number of studies have indicated associations between the impairment of respiratory health and exposure to ambient air pollutants such as ozone (O$_3$) , nitrogen dioxide (NO$_2$) , sulfur dioxide(SO$_2$) , particulate matters (PM$\_$10/). To evaluate this associations, we used the pulmonary function tests (peak expiratory flow rate : PEFR) by mini-wright peak flow meter and counting neutrophils in the nasal lavage (NL) as biomarker. From 15 June to 16 July 1998, for the workers in the highway tollgates, PEFR and NL were measured three times daily and twice per week. and association between the level of air pollutants and PEFR and NL were analyzed using the multiple regression model and the poisson regression model respectively. The results indicated that the effects of all measured air pollutants (SO$_2$, NO$_2$, O$_3$, PM$\_$10/) were not significantly associated with the value of PEFR. On the other side, SO$_2$, NO$_2$, PM$\_$10/ were significantly associated with the number of neutrophils in NL. The increase in SO$_2$, NO$_2$of 10ppb and in PM$\_$10/ of 10$\mu\textrm{g}$/m$^3$was associated with 24%, 21%, 35% increases in neutrophil counts. But the ozone exposure was not associated with NL.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.368-376
• /
• 2004

The estimation of the diffusion coefficients of the Gaussian plume model and the release rate by assimilation of tracer-gas measurements on Younggwang site was tested. Diffusion coefficients were modified by linear programming of both the measurements and the simulated using the Gaussian plume model. The application of the modified diffusion coefficients improved the prediction ability of the Gaussian plume model on both 3 km and 8 km arc lines. And, the release rate of tracer gas was estimated using least squares method. The optimal source rate was estimated by minimizing the errors between the measured concentrations and the computed ones by the Gaussian plume model. The obtained release rate showed a good agreement with the real release rate of the Younggwang experiment in 24%.