• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.148-148
• /
• 2020

산업의 고도화가 진행됨에 따라 화학원료의 사용이 증가하고 있고 독성을 가진 화학물질이 하천으로 유입되는 사고가 빈번하게 발생하고 있다. 수환경으로 유입되는 유해화학물질은 주로 무색무취의 물질들로 사고가 발생하더라도 초기 발견이 어려워 어류폐사를 유발하거나 취수시설에서 용수로 취수되는 경우가 발생하기 때문에 이에 대한 대응책 마련이 필수적이다. 하천에 유입된 오염물질의 거동을 신속하게 예측하기 위해 1차원 오염물질 추적 모형이 활용되는데, Fickian 이송-분산 모형(Fickian Advection-dispersion equation model; FADE)이 주로 사용되고 있다. 하지만 FADE는 오염물질이 하천 저장대에서 지체되는 현상을 반영하지 못하기 때문에 농도곡선의 왜곡도를 구현하지 못하는 단점을 가지고 있다. 따라서 본 연구에서는 하천저장대모형(River Storage Model; RSM)을 개발하고 이를 국가하천인 감천에 적용하였다. 본 연구에서 개발한 RSM은 분산계수, 본류대 면적, 저장대 면적, 저장대 교환계수의 네 가지 매개변수를 통해서 하천의 물질 저장 및 교환 특성를 구현한 non-Fickian 모형으로서, 생화학반응, 휘발, 흡·탈착항을 추가하여 유해화학물질의 혼합 거동을 정확하게 모의할 수 있도록 개발하였다. 저장대 모형의 매개변수를 산정하기 위해서 하천 유량과 지형자료를 기반으로 HEC-RAS를 모의하여 계산된 수리특성을 입력변수로 사용하였다. 저수기, 평수기, 풍수기 유량을 기준으로 세 경우의 시나리오 모의를 수행하였는데, 5ton의 톨루엔이 김천산업단지에서 감천으로 유입된 경우 약 20km 하류에 위치한 취수장에서 톨루엔의 농도변화를 예측했다. 보존성 물질에 대한 모의 결과, 풍수기의 경우 저수기에 비해 유속이 크기 때문에 취수장에서 20.56시간 먼저 기준농도에 도달하고, 7.21시간 더 짧게 머무는 것으로 나타났다. 유해화학물질의 반응특성에 대한 민감도 분석을 시행한 결과, 생화학적 반감기가 18.98시간보다 길고, 옥탄올-물 분배계수가 2.267 이하인 물질은 생분해 및 흡·탈착 반응에 둔감한 것으로 나타났다. 1m 수심 기준 0.114m/s 이하 유속에서의 하천 수리조건에서는 화학물질의 휘발성을 무시할 수 있는 것으로 밝혀졌다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1799-1803
• /
• 2008

표면영상유속계는 하천 표면의 영상을 분석하여 유속을 산정하는 매우 실용적이며 간편한 장비이다. 그러나, 표면영상유속계를 이용하여 유량을 산정하고자 할 경우, 하천 표면의 평면 측량 자료와 하천의 단면 측량 자료가 반드시 필요하다. 이 때문에 표면영상유속계의 간편성과 유용성에도 불구하고, 이용자들이 쉽게 이용하기 어렵다는 그릇된 인식을 줄 수 있다. 만일 효율적이고 간편하게 하천의 단면을 추정할 수 있다면, 표면영상유속계를 마치 일반적인 프로펠러 유속계처럼 쉽게 이용할 수 있을 것이다. 이 연구는 일반적인 평면 측량없이, 두 대의 비디오 카메라로 이루어진 표면 영상 유속계를 이용하여 하천 평면을 계측하는 방법을 개발하는 것이다. 이를 통하여 표면 영상 분석 과정을 반자동화할 수 있게 된다. 두 대의 카메라를 이용한 평면 측량은 사진 측량 분야이나 컴퓨터 비전 분야에서 오랫 동안 연구되어 왔다. 이 기법을 표면영상유속계에 적용함으로써 간단하게 하천의 평면 좌표를 구할 수 있도록 하였다. 두 대의 카메라에 대해서는 직접 선형 변환법을 이용하여 내부 표정과 외부 표정을 수행하여 변환의 매개 변수들을 추정하였다. 추정된 변수들과 공간 전방 교회법을 이용하여 하천의 고정된 기준점들의 좌표를 측정한다. 측정된 좌표점들은 기울어진 영상을 연직으로 사영된 평면으로 변환하는 데 이용되며, 이 과정을 통하여 번거로운 하천의 평면 측량 과정을 생략할 수 있게 되었다. 온천천에 실제 적용하여 본 결과, 결과는 아직은 만족할 만한 정도는 아니나, 보다 정밀한 카메라의 보정 등을 통하여 보다 나은 결과를 도출할 수 있을 것으로 기대된다.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.96-106
• /
• 2008

The Korean Construction Industry significantly contributed to the Korean economic development not only by preparing the domestic infrastructure but also by successfully conducting various international projects. However, major incidents such as the collapse of Sung-Su Bridge and Sam-Pung Department Store along with stagnation of Korean Economy have raised questions about underlying systematic problems of the Korean Construction Industry. As a solution to resurrect the Korean Construction Industry, the Construction Management (CM) system introduced in late 1990's and increasingly utilized as an innovative delivery system. Despite of the fast growth of CM, the performance of CM has not been up to the hype and low CM fee has been identified as one of the main reasons of unsatisfactory CM performance. Therefore, this research attempted to propose ways of improving 'CM Fee Guidelines' published by Korean Ministry of Construction and Transportation by conducting a benchmarking study on Global Standards of estimating CM Fee. International organizations benchmarked in this research include CMAA, ASCE, DOL, DOE, etc. Various investigation and analysis revealed that Korean 'CM Fee Guidelines' need to significantly modified comparing to Global Standards. This research also tried to prepare recommendations to improve the CM deliver system focusing on the 'Method of CM Fee Estimation' and Selection of a CM firm as an owner's agent.

• Journal of the Korea Concrete Institute
• /
• v.23 no.2
• /
• pp.159-168
• /
• 2011

In the present study, an improved design method was developed for the punching shear strength of interior slabcolumn connections and column footings with and without shear reinforcement. In the evaluation of the punching shear strength, the possible failure mechanisms of the connections and column footings were considered. The considered failures modes were inclined tensile cracking of concrete, yielding of shear re-bars, and concrete crushing of compression zone/strut. The punching shear applied to the concrete critical section was assumed to be resisted mainly by the compression zone. The punching shear strength of the concrete compression zone was evaluated based on the material failure criteria of the concrete subjected to the compressive normal stress and shear stress. For verification of the proposed design method, its prediction was compared with the existing test results. The result showed that the proposed method predicted the strengths of the test specimens better than the current design methods of the KCI code for both the shear reinforced and unreinforced cases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.633-639
• /
• 2011

To estimate a proper fleet size of taxi, a daily archived tachograph was analyzed for both corporate taxi and owner-driver taxi. Mathematical model to estimate a desirable number of taxi was developed using city's characteristics of Pyeong-taek city case. This model could be used as coefficient of determination of city's characteristics model(revised R square) was 0.970. a total amount of taxi number in the future for the city of Pyeong-taek. As a result, the model produced a proper fleet size of Pyeong-taek city in the future as 1,794 taxis by 2014, which was higher in number by 214 taxis, compared to 2009. Also, the model of the service rate, considering operation condition, was used to analyze a total number of taxies. As a result, the model showed a total number of taxis as 1,224 taxis by 2014, which is lower in number by 356 taxies, compared to 2009. It is desirable to use both city's characteristics model and the service rate model to estimate a total number of taxis in conclusion. As a result of adopting average value from two model, the model produced a total supply plan of Pyeong-taek city as 1,509 taxis by 2014, which is smaller than in number by 71 taxis, compared to 2009.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.108-114
• /
• 2012

Escalation method examining the changes in price index has been widely utilized in public construction projects. The previous escalation method determined estimated changes in price based on the average unit price of contract items over a period of time. In relation to this method, the issue has been raised that the fluctuation rates of previous method show different trends compared with other related price indices, as the influence of the small group of contract items with large unit prices overwhelms the others. This research suggested an improved escalation method which estimates the fluctuation rate by examining the changes in CCI (construction cost index) and applies it to the total amount or the partial amount deducted for labor cost in price escalation for previous bid price method. To verify the improvement, a case study is conducted on an educational facility, and the fluctuation rate was estimated in two different base periods (short term, long term). The results over the long term showed similar tendencies to those of related price indices, as well as significant differences in fluctuation rates compared to those of the previous method.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.63-67
• /
• 2006

본 연구에서는 해안침식이 진행되고 있는 해운대 해수욕장의 장기 해안지형 변화 및 인근지역의 토지피복 변화에 대해 분석하였다. 지난 60여 년간의 항공사진을 이용하여 해안선을 추출하고 이를 수심측량 및 GPS측량 자료를 이용하여 조위보정한 후, 해빈면적을 추출하여 해안지형 변화를 분석하였다. 또한 환경부 토지피복 세분류를 기준으로 하여 육안판독을 통해 13개년도의 토지피복도를 제작하고 토양유실량을 산정하여 연도별 토지피복 변화를 분석하였다. 그 결과, 해운대 해수욕장의 해안선이 점진적으로 후퇴하고 있으며 해수욕장 면적이 전체적으로 감소하고 있는 것으로 나타났다. 춘천천 복개 및 도시개발에 의한 모래 공급원 차단이 이러한 해안침식에 영향을 주는 인위적 원인이라고 사료된다.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.163-168
• /
• 2009

Travel time reduction is a benefit in economic analysis. Freight transportation time reduction benefits influence the logistics industry. The objectives of this paper are to estimate the Value of Time (VOT) for transportation time reduction with logit methodology. The data of Gyeonggi-do's domestic road freight transport in 2007 are used. VOT was estimated for five commodities. An average VOT of 19,946 won/vehicle-hr was calculated; transport of electronic parts had the highest VOT. This study will help provide direction for improving Korea's road infrastructure for freight.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.97-105
• /
• 2009

This study was conducted for the purpose of examinating the safety and economical efficiency of large high tension bolted joints. The specimen using F10T-M30 large high strength bolts has been selected and static tensile test has been conducted to evaluate the slip characteristics. In addition, finite element analysis has been carried out to estimate the number of required bolts. As a result, the average slip coefficient of M30 high strength bolts exceeded 0.4 - the standard in highway bridge design specification - and has satisfied the slip strength, which is the same as that of M22 high strength bolts. In addition, if F13T-M22 high strength bolts were applied, the number of required bolts decreased by 21%, and if F10T-M30 high strength bolts were applied, the number of required bolts decreased by 46%, that leads to the conclusion that the economical efficiency in accordance with diametering of high strength bolts was now verified.

• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.43-50
• /
• 2009

A 3-D numerical analysis was carried out to observe potential effects of orientation of inherent weak zones to tunnel behaviors and stress distributions during tunnel excavation. Weak zones used for the analysis were placed at the upper 1D part from crown, on the crown and on the center of face, using orientations derived from the 6th RMR parameter for assessment of joint orientation effect on tunnel. Mechanical properties of rock mass were derived through a in-situ displacement measurement-based back analysis. Finally, a classification chart for crown settlement with five ranks based on orientation and location of weak zones is suggested.