• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.42-48
• /
• 2006

In this study, a repetitive response surface enhancement technique (RRSET) is proposed as a new system approximation method for the efficient multidisciplinary design and optimization (MDO). In order to represent the highly nonlinear behavior of the response with second order polynomials, RRSET introduces a design space transformation using stretching functions and repetitive response surface improvement. The tentative optimal point is repetitively included to the set of experimental points to better approximate the response surface of the system especially near the optimal point, hence a response surface with significantly improved accuracy can be generated with very small experimental points and system iterations. As a system optimizer, the simulated annealing, which generates a global design solution is utilized. The proposed technique is applied to several numerical examples, and demonstrates the validity and efficiency of the method. With its improved approximation accuracy, the RRSET can contribute to resolve large and complex system design problems under MDO environment.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.4
• /
• pp.212-218
• /
• 2021

In this study, we conducted a design optimization of the Type 4 composite pressure vessels to enhance the pressure-resistant performance of the vessels while keeping the thickness of the composite layer. The design variables for the optimization were the stacking angles of the helical layers of the vessels to improve the performance. Since the carbon fibers are expensive material, it is desirable to reduce the use of the carbon fibers by applying an optimal design of the composite pressure vessel. The structural analysis and optimization process for the design of Type 4 composite pressure vessels were carried out using a commercial finite element analysis software, Abaqus and a plug-in for automated simulation, Isight, respectively. The optimization results confirmed the performance and safety of the optimized Type 4 composite pressure vessels was enhanced by 12.84% compared to the initial design.

• Tunnel and Underground Space
• /
• v.17 no.6
• /
• pp.493-502
• /
• 2007

Measurements of hydraulic conductivity are point or interval values, and are highly limited in their number. Meanwhile, results of geophysical prospecting can provide the information of spatial variation of geology, and abundant in number. In this study, it was aimed to develop a data integration tool for constructing a hydraulic conductivity map by integrating geophysical data and hydraulic conductivity measurements. The developed code employed a geostatistical optimization method, simulated annealing (SA), and consists of 4 distinct computation modules by which from exploratory data analysis to postprocessing of the simulation were processed. All these modules are equipped with Graphical User Interface (GUI). Validation of the developed code was evaluated in-situ in characterizing hydraulic characteristics of highly permeable fractured zone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.973-980
• /
• 2009

Many studies which have been done for efficient installation and management of wireless sensor networks (WSN) include energy savings, key managements and sensor deployments. Sensor deployment problem is one of the most important and fundamental issues among them in that the topic is directly related with the system cost and performance. In this paper, we suggest a sensor deployment scheme that reduces the system cost of WSN while satisfying the fundamental system requirements of connectivity between sensor nodes and sensing coverage. Using graphical information system(GIS) which contains region-dependent information related with connectivity condition, the initial positions of sensors in the procedure simulated annealing (SA) are determined. The GIS information helps in reducing system cost reduction not only at the initial deployment of SA but also at the final deployment of SA which is shown by computer simulations.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.5
• /
• pp.400-408
• /
• 2023

The tracking accuracy of buoy-based LBL(Long Base Line) systems can be significantly influenced by sea environmental conditions. Particularly, the position of buoys that may have drifted due to sea currents. Therefore it is necessary to predict and optimize the drifted-buoy positions in the deploying step. This research introduces a free-drift simulation model using ocean data from the European CMEMS. The simulation model's predictions are validated by comparing them to actual sea buoy drift tracks, showing a substantial match in averaged drift speed and direction. Using this drift model, we optimize the initial buoy layout and compare the tracking performance between the center hexagonal layout and close track layout. Our results verify that the optimized layout achieves lower tracking errors compared to the other two layout.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.651-652
• /
• 2008

In this paper, we suggest a new multiobjective optimization algorithm which is based on the simulated annealing(SA) method. The proposed algorithm uses population-based simulated annealing and adapts elitism in the process of selection.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.267-284
• /
• 2004

As an initial step to understand the transitions in Korean bronze technology the present study has examined metallurgical microstructures of 8 artifacts excavated from the Silla Wang-Gyong site in Kyongju. Important trends have been found in alloy compositions and also in manufacturing processes. In the design of alloys, the Sn content was apparently changing toward the peritectic point, 22 mass %, of the Cu-Sn phase diagram while the Pb addition was intentionally avoided. This trend in composition was found accompanied by the introduction, subsequent to casting, of such special thermo-mechanical treatments as quenching and forging in artifact manufacture. In addition, the Sn content in alloys containing a significant amount of As was relatively low and no evidence of forging was observed in them. The use of quenching and forging and the rejection of Pb and As from alloys are all necessary requirements if the brittle nature of high Sn alloys is to be overcome in bronze working. This paper will show that the Wang-Gyong era corresponds to that of innovations leading to the technical climax in Korean bronze tradition, which has been maintained up to the present.

• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.145-156
• /
• 2005

MODFLOW, 3-D finite difference code, is widely used to model groundwater flow and has been used to assess the effect of excavations on the groundwater system due to construction of subways and mountain tunnels. The results of numerical analysis depend on boundary conditions, initial conditions, conceptual models and hydrogeological properties. Therefore, its accuracy can only be enhanced using more realistic and field oriented input parameters. In this study, SA(simulated annealing) was used to integrate hydraulic conductivities from a few of injection tests with geophysical reference images. The realizations of hydraulic conductivity random field are obtained and then groundwater flows in each geostatistically equivalent media are analyzed with a numerical simulation. This approach can give probabilistic results of groundwater flow modeling considering the uncertainty of hydrogeological medium. In other words, this approach makes it possible to quantify the propagation of uncertainty of hydraulic conductivities into groundwater flow.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.562-572
• /
• 2003

A matched-target model inversion method was developed for a passive sonar to estimate the position of moving targets. Based on the well known matched-field processing in underwater acoustics, the method finds target position by matching the measured target directions and frequencies with the corresponding values of the proposed target model. For the efficient and accurate estimations, the parameter searching was accomplished using a hybrid optimizing method, which first starts with a global optimization such as generic algorithm or simulated annealing then applies a local optimization of a simple down hill algorithm. The suggested method was testified using simulations for three different moving scenarios. The simulation results showed that the method is robust in convergence, even under the situation of over 5 times standard deviation of Gaussian distribution of measured error, and is practical in calculation time as well.