• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.125-130
• /
• 2008

Mid-Infrared (MIR) 영상은 화산 활동 및 산불로 인한 재난관측, 지표물질 관측, 해수 온도 측정과 같은 분야들에서 사용되고 있다. 그러나 MIR영역은 지표의 복사율과 대기의 영향으로 인한 변화가 매우 심하고, 낮 영상의 경우 태양 복사량에 의한 영향도 고려해야 하는 어려움이 있다. 따라서 단일밴드인 MIR영상을 이용하여 표면온도를 얻기 위해서는 영상이 취득된 시간과 장소에서 관측된 태양 복사량 및 여러 가지 대기 변수가 필요하다. 본 연구의 목적은 기존의 MIR 영상 연구가 다중밴드를 기반으로 한 것과 달리 단일 밴드의 영상을 이용하여 표면온도를 측정하는데 있다. 이를 위하여 MODIS MIR 영상을 대상으로 MODTRAN을 사용하여 MIR 영역의 대기보정 기법을 적용 한 뒤 복사전달 모델을 이용하여 지표의 복사량을 측정하였다. 획득된 지표온도 영상의 정밀도를 측정하기 위해서 기존의 온도 알고리즘인 split-window algorithm에 의해 얻어진 해수온도 영상과의 비교를 통하여 오차 원인에 대해 분석을 실시하였다. 그 결과 낮 영상의 경우 -4.19${\pm}$1.19$^{\circ}C$ 정도의 온도 차가 났으며, 밤 영상의 경우 0.5$^{\pm}C$0.39$^{\circ}C$ 정도로 비교적 좋은 결과를 보였다. 이는 낮 영상의 경우 지표의 복사율에 대한 온도의 민감도가 매우 높기 때문에 높은 오차가 발생하지만, 밤 영상의 경우 태양빛에 의한 영향이 없으므로 좋은 결과를 나타내기 때문이다. 따라서 단일밴드 MIR영상을 이용한 지표온도 추정 시 대기에 의한 영향보다 지표 복사율에 의한 영향이 높다고 추정할 수 있다.

• Journal of the Korean Society of Radiology
• /
• v.85 no.1
• /
• pp.77-94
• /
• 2024

If a solitary spinal lesion is found in an older patient, bone metastasis can be primarily considered as the diagnosis. Bone metastasis can occur anywhere, but it mostly occurs in the vertebral body and may sometimes show typical imaging findings, presenting as a single lesion. Therefore, differentiating it from other lesions that mimic bone metastases can be challenging, potentially leading to delayed diagnosis and initiation of primary cancer treatment. This review provides an overview of imaging findings and clinical guidelines for bone metastases and discusses its differences from other diseases that can occur as solitary spinal lesions in older patients.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.01a
• /
• pp.213-214
• /
• 2013

본 논문에서는 다중화면 분할 제작 콘텐츠 효과에 대해서 제안한다. 다중화면 분할 영상은 기존의 단일 영상 제공에 비해 2개, 3개, 4개, 9개의 화면을 각각 분할하여 다양한 영상들을 제공함으로써 보다 풍부한 정보 제공과 영상의 화려함과 미학을 제공한다. 이와 반대로 여러 화면의 정보들을 동시에 제공함으로써 한 화면에 집중하지 못함으로 여러 다양한 정보들을 수용하지 못하는 단점도 있다. 그러나 단일 화면보다는 다중 분할 화면으로 다양한 정보를 제공함으로써 얻는 효과가 더 크다고 사료한다. 이러한 다중화면 효과는 시청자들에게는 더 흥미로운 영상으로 충족 될 것이라고 사료한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.137-145
• /
• 2014

This paper suggests an LDA-based long distance face recognition algorithm for intelligent surveillance system. The existing face recognition algorithm using single distance face image as training images caused a problem that face recognition rate is decreased with increasing distance. The face recognition algorithm using face images by actual distance as training images showed good performance. However, this also causes user inconvenience as it requires the user to move one to five meters in person to acquire face images for initial user registration. In this paper, proposed method is used for training images by using single distance face image to automatically create face images by various distances. The test result showed that the proposed face recognition technique generated better performance by average 16.3% in short distance and 18.0% in long distance than the technique using the existing single distance face image as training. When it was compared with the technique that used face images by distance as training, the performance fell 4.3% on average at a close distance and remained the same at a long distance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.149-156
• /
• 2008

In this paper, we propose a method aiming at updating the building information of the digital maps using single high resolution satellite image and digital map. Firstly we produced a digital orthoimage through the automatic co-registration of QuickBird image and 1:1,000 digital map. Secondly we extracted building height information through the template matching of digital map's building vector data and the image's edges obtained by Canny operator. Finally we refined the shape of some buildings by using the result from template matching as the seed polygon of the greedy snake algorithm. In order to evaluate the proposed method's effectiveness, we estimated accuracy of the extracted building information using LiDAR DSM and 1:1,000 digital map. The evaluation results showed the proposed method has a good potential for extraction and revision of building information.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2382-2387
• /
• 2012

In this paper, we propose a new method to extract and analyze appendicitis from abdomen ultrasonographic image in order to measure the thickness of appendix and change of inflammation correctly. Since the ultrasonographic image has environmental effect in nature, we standardize the image first and the process of extracting appendicitis then extracts the bottom facia which has the critical role to find appendix area. The experiment with real appendicitis patient verifies that the proposed method is more effective than current field expert's naked eye inspection.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.06a
• /
• pp.839-842
• /
• 2022

실감적인 가상 현실을 위해서는 고화질의 360 도 영상 스트리밍이 필요하다. 그러나 이는 높은 대역폭과 연산량을 요구하기 때문에 일반적인 가상 현실 기기로는 감당하기 힘들다. 이를 보완하기 위한 360 도 영상 부호화 및 전송 기술이 활발히 연구되고 있으며, 대표적으로 사용자 시점 기반 타일 스트리밍 기법 등이 있다. 본 논문은 기존의 CTU 기반 스트리밍과 타일 기반 스트리밍과 함께 복호기 적응적인 단일 계층 타일 바인딩을 활용한 타일기반 스트리밍의 부호화 및 복호화 성능을 비교한다. 수행된 실험결과, 단일 계층 타일 바인딩을 활용한 타일 스트리밍 방법이 기존의 타일 스트리밍 기법에 비해 유사한 비트율 성능에 대비하여 복호화 시간에서 큰 이득을 볼 수 있음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.112-118
• /
• 2009

Skin color segmentation techniques have been widely utilized for face/hand detection and tracking in many applications such as a diagnosis system using facial information, human-robot interaction, an image retrieval system. In case of a video image, it is common that the skin color model for a target is updated every frame for the robust target tracking against illumination change. As for a single image, however, most of studies employ a fixed skin color model which may result in low detection rate or high false positive errors. In this paper, we propose a novel method for effective skin color segmentation in a single image, which modifies the conditions for skin color segmentation iteratively by the image feedback of segmented skin color region in a given image.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.2 s.36
• /
• pp.3-13
• /
• 2006

Extraction of man-made objects from high resolution satellite images has been studied by many researchers. In order to reconstruct accurate 3D building structures most of previous approaches assumed 3D information obtained by stereo analysis. For this, they need the process of sensor modeling, etc. We argue that a single image itself contains many clues of 3D information. The algorithm we propose projects virtual shadow on the image. When the shadow matches against the actual shadow, the height of a building can be determined. If the height of a building is determined, the algorithm draws vertical lines of sides of the building onto the building in the image. Then the roof boundary moves along vertical lines and the footprint of the building is extracted. The algorithm proposed can use the shadow cast onto the ground surface and onto facades of another building. This study compared the building heights determined by the algorithm proposed and those calculated by stereo analysis. As the results of verification, root mean square errors of building heights were about 1.5m.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.191-197
• /
• 2012

In this paper we present creating 3D image from 2D image by extract initial depth values calculated from focal values. The initial depth values are created by using the extracted focal information, which is calculated by the comparison of original image and Gaussian filtered image. This initial depth information is allocated to the object segments obtained from normalized cut technique. Then the depth of the objects are corrected to the average of depth values in the objects so that the single object can have the same depth. The generated depth is used to convert to 3D image using DIBR(Depth Image Based Rendering) and the generated 3D image is compared to the images generated by other techniques.