• Title/Summary/Keyword: 단

Search Result 22,793, Processing Time 0.05 seconds

Estimation of Cut-off Stratum in the Highly Skewed Population (왜도가 심한 모집단의 절사층 추정)

  • 한근식
    • Survey Research
    • /
    • v.5 no.1
    • /
    • pp.93-101
    • /
    • 2004
  • In business survey, cut-off sampling is usual, The contribution from cut-off part of the population is at least small in comparison with the remaining population. In this case, part of the target population is excluded from the selection and parameter estimations are only based on Take-all and Take-some stratum. It may be tempting not to use resources on enterprises that contribute little to the overall results of the survey. And this reduces the response burden for these small enterprises. But, the size of cut-off stratum has been increased as a way to manage reduced budgets. This leads to additional bias. In this study, the population have been separated as three stratum, cut -off, take-some, take-all, and we will estimate cut-off part using auxiliary variable.

  • PDF

Visiting Characteristics of Nogodan and Sesokpyongjan in Chirisan National Park (지리산 국립공원 노고단과 세석평전의 이용특성)

  • 오구균;조현서;최재길
    • Korean Journal of Environment and Ecology
    • /
    • v.9 no.1
    • /
    • pp.62-69
    • /
    • 1995
  • No. of visitor at Chirisan National Park increased by three times, respectively after seven years comparing to the visitors before construction of the Songsamjae access road in 1988. Fifty percent of visitors at southern and northern rigion of Chirisan National Park visited Nogodan in spring and autumn season. And thirty percent of visitors at Sesokpyongjon accessed from Nogodan, respectively. Visitors at Nogodan and Sesokpyongion were estimated each 410.000 persons and 150.000 persons in 1994. Maximum daily users of shelter and camp ground were each 570 persons in Nogodan and 1, 100 persons in Sesokpyongjon in 1994. The Songsamjae access road in Chirisan National Park increased users' impacts on mountain ridge environment including Nogodan, Sesokpyongjon. etc. Therefore user management including prohibiting camping shall be necessary in order to minimize environmental damage of mountain ridge.

  • PDF

Design of a High Power and High Gain Two-Stage Doherty Power Amplifier (고 출력 고 이득 2단 도허티 전력증폭기의 설계)

  • Ghim, Jae-Gon;Kim, Ji-Yeon;Lee, Dong-Heon;Kim, Jong-Heon
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.17 no.11 s.114
    • /
    • pp.1030-1039
    • /
    • 2006
  • A high power and high gain Doherty amplifier is designed by using embedded driver amplifiers in the final stage. The operational characteristics of a two-stage Doherty amplifier are analyzed, as a function of the two-stage peaking amplifier gate biases. The driver stages and final output stages are implemented using two single-ended MRF21045s and a single push-pull packaged MRF5P21180, respectively. This two-stage Doherty amplifier demonstrated 27 dB gain with a PAE of 23 % at 15 W average output power.

A Study on Stucture of CAD / CAPP System in th e Heading Process Using Rigid-Plastic Finite Element Analysis (강소성 유한 요소법을 이용한 냉간 2단 헤딩가공에 있어서 CAD / CAPP 시스템의 구축에 대한 연구 1))

  • 신영우
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.30 no.1
    • /
    • pp.53-63
    • /
    • 1994
  • The conventional cold-heading process for the production of a bolt-shaped product is composed of some process and two or three blows heading. The strength of a bolt-shaped product produced by multi-blow heading depends on the working conditions of the heading process such as preforming die angle, corner-radius of the necked portion of product, and the reduction in height during pre-forming. Arigid-plastic finite-element program(RDHPSC) has been coded and the program testified by comparison with the results of experimentation. A method of testing the optimum die-conditions in the double-blow heading process by use of RDHPSC analysis is discussed a fundamental structures of CAD/CAPP system for two-blow heading process is discussed.

  • PDF

Development of a graphic user interface for single reservoir simulation model reflecting discrete hedging rule (용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영 모형의 사용자 편의 환경 개발)

  • Jin, Youngkyu;Lee, Sangho;Park, Jinhyuck
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.374-374
    • /
    • 2018
  • 프로그래밍 언어로 개발된 프로그램들은 최종 사용자 입장에서 입력과 출력이 불편하다. 또한, 모의 결과를 분석하기 위하여 그래프를 작성하는 소프트웨어를 이용하면 시간이 오래 걸린다. 본 연구에서는 기 개발된 용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영 모형을 최종 사용자가 쉽게 활용할 수 있도록 사용자 편의 환경을 개발한 것에 대해 소개하고자 한다. 용수 감량공급 기준곡선을 반영한 단일 댐 모의 운영의 사용자 편의 환경은 미국의 GoldSim Technology Group에서 개발한 GoldSim을 이용하여 개발하였다. 개발된 사용자 편의 환경에는 단일 댐 모의 운영에 필요한 여러 입력 자료를 쉽게 입력할 수 있도록 하였다. 단일 댐 모의 운영 입력 자료에는 월별 기본계획공급량, 가뭄 단계별 용수 감량공급 비율, 과거 유입량 시계열, 갈수 빈도 유입량 시계열, 가뭄 단계별 감량공급 실행 저수량, 초기 저수량, 저수용량 등이 있다. 개발된 모형의 초기값은 합천댐의 자료가 입력되어 있으나, 입력자료를 변경하여 다른 다목적댐의 모의 운영에 활용이 가능하다. 단일 댐 모의 운영 결과로서 모의 기간 내 발생한 용수별 용수 공급 부족량과 감량공급 일수를 확인가능하다. 또한, 단일 댐 모의 운영 결과를 다양한 그래프로 출력 할 수 있다. 출력 가능한 시계열 그래프는 사용자가 입력한 용수 감량공급 기준곡선, 모의 시 사용한 유입량 시계열, 가뭄 단계, 용수 공급량, 저수량이다. 연구의 사례와 같이 GoldSim을 활용하면 연구개발의 편의 환경을 별도의 편의 환경 개발자를 거치지안고 과학 기술자가 직접 개발할 수 있다.

  • PDF

Operational Data Storage and Retrieval for KSTAR Large Scale Experimental Machine (대형 연구실험장치인 KSTAR에서 운전 데이터의 저장 및 추출)

  • Lee, Sangil;Kim, MK.;Baek, S.;Park, MK.;Lee, T.G.;Park, J.S.;Hong, J.
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2009.04a
    • /
    • pp.278-281
    • /
    • 2009
  • KSTAR(Korea Superconducting Tokamak Advanced Research)는 고성능 플라즈마 연구를 위한 대형 연구실험 장치이다. 이러한 거대 장치에는 많은 시스템이 분산되어 연결되어 있으며 그 구조 역시 매우 복잡하여 시스템간의 인터페이스에 많은 제약과 어려움이 따른다. 이러한 복잡하고 다양한 시스템을 통합하고 여기서 발생하는 여러 종류의 데이터를 획득하기 위해서 KSTAR는 EPICS(Experimental Physics and Industrial Control System)라는 오픈소스 기반의 분산 제어용 미들웨어를 구축하였고 이를 기반으로 KSTAR 통합 제어 시스템을 개발 하였다. 2008년 KSTAR 최초 플라즈마 실험 기간 동안의 운전을 통해 EPICS 미들웨어와 EPICS channel archiver를 이용하여 다양한 24시간 연속 운전데이터를 안정적으로 저장하고 추출할 수 있음을 확인하였다. 논문에서는 시스템의 구축 방법 및 운전결과에 대해 기술하고자 한다.

램제트 엔진에서의 화염 전파와 비정상 연소 현상에 관한 수치해석

  • ;Vigor Yang
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2000.04a
    • /
    • pp.10-10
    • /
    • 2000
  • 램제트 엔진은 비추력이 높고 추력 레벨은 낮으므로, 2단 추진기관에 적합한 추진 시스템이다. 1단-추진기관의 작동이 끝나고, 2단 램제트 엔진이 점화 후 안정된 연소에 도달되기까지 비행체의 속도는 항력에 의하여, 초당 약 마하수 0.1 정도씩 감소된다. 1단 연소 후 2단 램제트로 전환되는 지연시간이 길수록 1단에서 요구되는 종말 가속도는 증가되므로, 1단이 차지하게되는 부피는 증가되고 비행체의 크기 또한 늘어나게 된다. 따라서 1단에서 2단 램제트로 천이되는데 소요되는 시간을 가능한 짧게 하는 것이 효과적이다. 그러나 램제트 엔진의 특성상 선결되어야할 다음과 같은 여러 문제들이 있다. 첫째, 1단 작동 시 공기 흡입구와 연소실은 차단벽으로 분리되어 있다가, 1단 연소후 차단막이 제거되어 외부공기가 램제트 연소실로 흡입된다. 흡입되는 공기는 흡입구의 형상에 의하여 램 압축되지만 초음속으로 연소실을 통과하게된다. 연료 주입 구에서 공급되는 연료는 연소실에서 유동의 흐름방향(streamline)에 따라서 연소실로 확산되는데, 연소되기 전에는 유속이 빠르게 노즐로 빠져 나가므로 램제트 연료가 재순환 구역(recirculation zone)으로 침투하는데 쉽지가 않다. 둘째, 연소실 입구에서 발생되는 와류 (ring vortex)는 1단 연료의 고온 연소 가스를 연소실로 확산시키는데, 비 균일한 온도 분포를 유발하여 램제트 연료의 점화에너지가 공급되는 시간이 적당하지 않을 경우 균일한 화염 전파에 악영향을 준다. 셋째, 연소실에서의 빠른 유동 조건은 연료가 연소실에 머무를 수 있는 시간을 감소시키며, 연소실 입구에서 강한 전단 응력이 발생되어 화염이 안정화되는데 악 영향을 미치게된다. 본 논문은 공기 흡입구, 연소실 및 노즐을 통합하여 수치해석을 하였으며 열유동/점화/연소등의 미케니즘을 이해하고, 주요 인자들 중 와류의 영향에 초점을 맞추었다.다고 판단되며 배기 가스 자체에 대기 공기중에 함유되어 있던 습기가 얼어붙는(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각 1례(2.9%)였다. 14) 식도경 시행회수는 1회가 17례(54.8%), 2회가 9례(29.0%), 3회 이상이 5례(16.1%)였다.EX>$IC_{50}$/ 값이 210 $\mu\textrm{g}$/$m\ell$로서 효과적

  • PDF

Effects of loading method to Improve Storage Quality under Room Temperature in Onion(Allium cepa. L) (양파 간이 저장시 적재방법이 저장성에 미치는 영향)

  • 이찬중;김희대;정은호;서전규
    • Food Science and Preservation
    • /
    • v.9 no.3
    • /
    • pp.282-286
    • /
    • 2002
  • This study was conducted to improve the storability of onion bulbs by loading method under room temperature and to reduce the rot caused by field open storage. Allium cepa cv. Changnyungdeago, late strain, was used for the test at the storage condition of 1-row-6-stairs, 2-rows-6-stairs, 4-rows-6-stairs, 1-rows-8-stairs, 2-rows-8-stairs, and 4-rows-8-stairs. The results obtained art as follows: The mean temperature was maintained lowly 1.6∼3.2$\^{C}$ in 1-row-6-stairs and 1.3∼2.6$\^{C}$ in 2-rows-6-stairs in contrast to 4-rows-8-stairs and the relative humidity was high when loading rows increased. The rotting rates in 1-row-6-stairs, 2-rows-6-stairs, 4-rows-6-stairs, 1-rows-8-stairs, 2-rows-8-stairs, and 4-rows-8-stairs were 11.4%, 11.6%, 12.4%, 14.6%, 13.9% and 16.6%, respectively, and became higher with increased rows and stairs of loading. Total weight loss of onion bulbs were l2.2%, 12.7%, 13.8%, 15.5%, 15.2% and 18.0% in 1-row-6-stairs, 2-rows-6-stairs, 4-rows-6-stairs, 1-row-8-stairs, 2-rows-8-stairs, and 4-rows-8-stairs, respectively. The rot of onion bulbs was caused mainly by Fusarium sp., Aspergilus sp., Botrytis sp., and bacteria.

Phenolic Compounds in Common and Tartary Buckwheat (단메밀과 타타리메밀의 페놀화합물 함량 비교)

  • Park Byoung-Jae;Kwon Soon Mi;Park Jong In;Chang Kwang Jin;Park Cheol Ho
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.50 no.spc1
    • /
    • pp.175-180
    • /
    • 2005
  • This study was carried out to determine total contents of phenol and flavonoid in common and tartary buckwheat for the purpose of developing new kind of functional food with buckwheat materials. Total content of phenol and flavonoid in seeds of tartary buckwheat were higher than that of common buckwheat. It showed same tendency in groats and hulls. Total content of phenol and flavonoid in groats showed higher than hulls in tartary buckwheat while those of hulls was a little higher than groats in common buckwheat seed. Rutin content in common buckwheat was higher in odor of the hulls (25.2 mg/100 g)>dehulled seed(19.8 mg/100 g)>groats (12.8mg/100 g). But tartary buckwheat was higher in oder of the groats(2042.1 mg/100 g)>dehulled seed (1375.8 mg/100 g)>hulls(138.7 mg/100 g). Flavanol content in dehulled seeds of the tartary and common buckwheat did not show the difference. However, flavanol contents in leaf, stem and spouts of tartary buckwheat were respectively higher than in those of common. Among the flavanols, catechin content was highest in all plant parts of their buckwheat and also was higher in odor of epicatechin>epicatechingallate. However, epicatechingallate content in sprouts of both buckwheat species was about 30-40 times higher than seeds.

ONE-VISIT APEXIFICATION USING MINERAL TRIOXIDE AGGREGATE (MTA를 이용한 미성숙 영구치의 즉일 치근단형성술)

  • Yeom, Soon-Joon;Park, Ki-Tae
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.28 no.3
    • /
    • pp.480-487
    • /
    • 2001
  • In children and adolescents, oral and maxillofacial trauma is one of the most common causes of dental and periodontal damage, which often induces crown fracture of the permanent anterior teeth. Frequently, these traumatized teeth lose their vitality, and require routine endodontic treatment if their root apices are closed. However if their apices are not fully closed, further root formation should be promoted by apexification or apexogenesis. Calcium hydroxide is a biocompatible & bacteriostatic material, and is widely used for apexification. However it has several disadvantages which include the need for multiple visits and patient cooperation, low strength and technical sensitivity in a broad apex. In one-visit apexification using IRM or SuperEBA, patient's visits can be minimized. However, their biocompatibility is questionable. Mineral trioxide aggregate(MTA) is a relatively new material. It is considered biocompatible with periapical hard tissue and has good marginal sealing ability. MTA is also known to help facillitate the growth of the cementum around it. In this case report, apexification with MTA was attempted on traumatized maxillary central incisors with immature root apices, and favorable clinical results were achieved.

  • PDF